벤딩 머신Bluhm Systeme
e-SolarMark FL
벤딩 머신
Bluhm Systeme
e-SolarMark FL
고정 가격 부가세 별도
€4,800
상태
중고
위치
Borken 

기계 정보
가격 및 위치
고정 가격 부가세 별도
€4,800
- 위치:
- Einsteinstraße 8a, 46325 Borken, Deutschland

전화하기
제안 세부 정보
- 광고 ID:
- A22186232
- 참조 번호:
- 23922
- 업데이트:
- 마지막 업데이트: 23.06.2026
설명
Bluhm Systems Marking Laser
Here we offer a Bluhm Systems marking laser.
Bluhm Systems marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested).
Introduction:
The e-SolarMark FL10W and 30W are Class IV lasers according to IEC 825 and EN 60825 standards (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing.
After installation, the laser system must meet the requirements for a product of a specific protection class, according to the aforementioned standards.
The e-SolarMark is a laser system for marking and engraving plastics, metals, and films, both stationary and in motion.
Technical specifications
e-SolarMark description
The e-SolarMark system consists of two main components:
1. The marking unit with laser head (scanning head) with focusing lens.
2. The control unit includes the power supply, electronic control system, and firmware for system operation, with I/O slots inside.
The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm.
Laser specification in standard configuration
Laser type: Fiber laser
Laser output power: FL2 model: 19W; typical
Wavelength: 1062 nm typical
Internal modulation: 20 to 80 kHz
Scanner head description:
Scan head: Two galvanometric mirror scanners with a hard, highly reflective dielectric coating.
F-Theta
Lens types and their properties:
Lens marking field: 70x70 mm to 300 x 300 mm
Focal length: B 192 mm
Operating environment conditions:
Relative humidity: up to 80%, non-condensing
Operating temperature: 5 - 40°C
Recommended operating temperature: 15-25°C
Dimensions W x H x D
Laser unit: 122 x 108 x 495 mm
Control unit: 520 x 380 x 215 mm
Cable length, marking/control unit: 3 m
Weight, marking unit: 5 kg
Ljdpfxszgci Es Ac Ijrn
Weight, control unit: 15 kg
Mains voltage
115/230 VAC, 50/60 Hz, single-phase.
Power consumption, FL2 model: 450W
Type: e-SolarMark FL
Condition: used
Scope of delivery: (See picture)
(Changes and errors in the technical data are subject to change!)
We would be happy to answer any further questions you may have by phone.
이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.
Here we offer a Bluhm Systems marking laser.
Bluhm Systems marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested).
Introduction:
The e-SolarMark FL10W and 30W are Class IV lasers according to IEC 825 and EN 60825 standards (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing.
After installation, the laser system must meet the requirements for a product of a specific protection class, according to the aforementioned standards.
The e-SolarMark is a laser system for marking and engraving plastics, metals, and films, both stationary and in motion.
Technical specifications
e-SolarMark description
The e-SolarMark system consists of two main components:
1. The marking unit with laser head (scanning head) with focusing lens.
2. The control unit includes the power supply, electronic control system, and firmware for system operation, with I/O slots inside.
The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm.
Laser specification in standard configuration
Laser type: Fiber laser
Laser output power: FL2 model: 19W; typical
Wavelength: 1062 nm typical
Internal modulation: 20 to 80 kHz
Scanner head description:
Scan head: Two galvanometric mirror scanners with a hard, highly reflective dielectric coating.
F-Theta
Lens types and their properties:
Lens marking field: 70x70 mm to 300 x 300 mm
Focal length: B 192 mm
Operating environment conditions:
Relative humidity: up to 80%, non-condensing
Operating temperature: 5 - 40°C
Recommended operating temperature: 15-25°C
Dimensions W x H x D
Laser unit: 122 x 108 x 495 mm
Control unit: 520 x 380 x 215 mm
Cable length, marking/control unit: 3 m
Weight, marking unit: 5 kg
Ljdpfxszgci Es Ac Ijrn
Weight, control unit: 15 kg
Mains voltage
115/230 VAC, 50/60 Hz, single-phase.
Power consumption, FL2 model: 450W
Type: e-SolarMark FL
Condition: used
Scope of delivery: (See picture)
(Changes and errors in the technical data are subject to change!)
We would be happy to answer any further questions you may have by phone.
이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.
문의 보내기
전화기 & 팩스
+49 2861 ... 광고
귀하의 광고가 성공적으로 삭제되었습니다
오류가 발생했습니다





















