Used AOKI SBIII-250LS-50 blow molding machine - Year 2010Technical Specifications & Performance DataUsed AOKI SBIII-250LS-50 blow molding machine for industrial packaging and PET container production. This machine is designed to form bottles from preforms, supporting efficient bottle manufacturing as part of a used bottling line or an independent container production operation.Manufacturer: AOKI TECHNICAL LABORATORY, INC.Model: SBIII-250LS-50Year of manufacture: 2010Electrical supply: 3-phase AC, 220 V, 60 HzInstalled power: 50.2 kWCurrent: 165 AMachine weight: 10,400 kgHydraulic pressure: 14.0 MPaPneumatic pressure: 3.0 MPaWater supply pressure: 0.3 MPaAdvanced Automation & Control SystemsThe AOKI SBIII-250LS-50 operates on a 3-phase AC electrical supply rated at 220 V and 60 Hz. Its 50.2 kW power requirement and 165 A current rating should be considered when planning electrical distribution, protection devices and control-panel connection. Blow molding machines of this type are intended for repeatable preform processing and controlled bottle forming in industrial packaging environments.The machine uses hydraulic, pneumatic and water services as part of its operating configuration. These utilities support the forming process and should be connected through suitably rated site installations.Production Line Integration CapabilitiesThis AOKI blow molding machine can operate as the bottle production stage of a PET beverage production line. It is typically installed upstream of downstream bottling equipment such as rinsing, filling, capping, labeling, secondary packaging and palletizing systems. Bottle transfer, accumulation and conveyor interfaces should be matched to the required production layout.As a second hand machine for industrial packaging, it can support PET bottle supply for beverage production and other packaging operations where preforms are converted into finished containers before filling.Machine Condition & Maintenance HistoryThe machine is identified as used and is offered as a blow molding machine manufactured in 2010. Its substantial 10,400 kg construction indicates a stationary industrial installation requiring appropriate handling equipment during loading, positioning and commissioning.Routine commissioning should include inspection of electrical connections, hydraulic circuits, pneumatic supply lines, water supply connections and all machine safety systems before production use.Operational Performance & VersatilityThe SBIII-250LS-50 is intended for PET bottle manufacturing from preforms. In a bottling equipment configuration, a blow molder provides the container supply stage ahead of filling and packaging operations, helping coordinate bottle availability with the production line’s filling demand.Its utility requirements include hydraulic pressure of 14.0 MPa, pneumatic pressure of 3.0 MPa and water supply pressure of 0.3 MPa. Stable utility conditions are important for consistent machine operation in a PET packaging process.Install...
Rodpfe Adttgjx Andoch
