Autotherm 6회로 온도 조절 장치 AWF 130-27/VK/6KAutotherm
Temperaturregelgerät AWF 130-27/VK/6K
Autotherm 6회로 온도 조절 장치 AWF 130-27/VK/6K
Autotherm
Temperaturregelgerät AWF 130-27/VK/6K
VB 부가세 별도
€80,000
상태
중고
위치
Borken 

기본 정보
- 제조업체:
- Autotherm
- 상태:
- 중고
가격 및 위치
VB 부가세 별도
€80,000
- 위치:
- Einsteinstraße 8a, 46325 Borken, Deutschland

전화하기
제안 세부 정보
- 광고 ID:
- A22147572
- 참조 번호:
- 23415
- 업데이트:
- 마지막 업데이트: 15.10.2026
설명
Autotherm
Type: Autotherm temperature control unit AWF 130-27/VK/6K
6-circuit temperature control unit
Without active refrigeration unit!
Gujdpfx Akjzd Rtys Aoh
According to the enclosed technical brief:
Temperature range: -40°C ... +85°C (extended temperature range -40°C…+130°C)
Increased heating capacity: 27 kW instead of 18 kW
Includes 1x temperature control in the main circuit
Includes 6x temperature measurement in each supply line
Includes 6x temperature measurement in each return line
Includes 6x flow rate and pressure measurement in each supply line
Includes 6x flow rate and pressure control
1 l/min .. 12 l/min and 0.1 bar … 3 bar
Including changeover control
Including frequency inverter-controlled pump in the main circuit
Including 6x 3-way valve
Includes 6x additional relief valve 2 … 12 bar, adjustable
Preset to 2.4 bar
Includes filling and draining device
For all circuits, jointly/simultaneously
Including 50-liter integrated tank
Including pneumatic drain function
Including S7 control system
Energy saving and increased cooling capacity:
An additional glycol circuit integrated into the temperature control circuit takes over
the cooling of the consumer in a temperature range of +85°C
to +30°C. The absorbed energy is transferred to the on-site
< 20°C chilled water network. The cooling capacity at a
supply temperature of +20°C is: 50 kW.
This increases the cooling speed in this temperature range and saves
energy due to the shorter running time of the refrigerant compressor.
(The footprint of the base unit increases by approx. 0.3 m² according to the data sheet).
Assembly in Rittal modular enclosure:
2x TS8 800x1000x2000 mm
1x additional, separate enclosure, min. 600x600x2000 mm
(for control/electrical components)
Supplied via on-site or optional cooling medium supply.
Supply temperature, on-site cooling fluid -43°C, cooling fluid requirement 7.5 m³/h, continuously regulated.
For cooling capacity, a cooling medium must be connected!
Weight approx. 1200 kg
Sold ex-works!
Condition: used
Scope of delivery: (See picture)
(Changes and errors in the technical data are subject to change!)
We will be happy to answer any further questions you may have by telephone.
이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.
Type: Autotherm temperature control unit AWF 130-27/VK/6K
6-circuit temperature control unit
Without active refrigeration unit!
Gujdpfx Akjzd Rtys Aoh
According to the enclosed technical brief:
Temperature range: -40°C ... +85°C (extended temperature range -40°C…+130°C)
Increased heating capacity: 27 kW instead of 18 kW
Includes 1x temperature control in the main circuit
Includes 6x temperature measurement in each supply line
Includes 6x temperature measurement in each return line
Includes 6x flow rate and pressure measurement in each supply line
Includes 6x flow rate and pressure control
1 l/min .. 12 l/min and 0.1 bar … 3 bar
Including changeover control
Including frequency inverter-controlled pump in the main circuit
Including 6x 3-way valve
Includes 6x additional relief valve 2 … 12 bar, adjustable
Preset to 2.4 bar
Includes filling and draining device
For all circuits, jointly/simultaneously
Including 50-liter integrated tank
Including pneumatic drain function
Including S7 control system
Energy saving and increased cooling capacity:
An additional glycol circuit integrated into the temperature control circuit takes over
the cooling of the consumer in a temperature range of +85°C
to +30°C. The absorbed energy is transferred to the on-site
< 20°C chilled water network. The cooling capacity at a
supply temperature of +20°C is: 50 kW.
This increases the cooling speed in this temperature range and saves
energy due to the shorter running time of the refrigerant compressor.
(The footprint of the base unit increases by approx. 0.3 m² according to the data sheet).
Assembly in Rittal modular enclosure:
2x TS8 800x1000x2000 mm
1x additional, separate enclosure, min. 600x600x2000 mm
(for control/electrical components)
Supplied via on-site or optional cooling medium supply.
Supply temperature, on-site cooling fluid -43°C, cooling fluid requirement 7.5 m³/h, continuously regulated.
For cooling capacity, a cooling medium must be connected!
Weight approx. 1200 kg
Sold ex-works!
Condition: used
Scope of delivery: (See picture)
(Changes and errors in the technical data are subject to change!)
We will be happy to answer any further questions you may have by telephone.
이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.
문의 보내기
전화기 & 팩스
+49 2861 ... 광고
귀하의 광고가 성공적으로 삭제되었습니다
오류가 발생했습니다

















