수직 머시닝 센터Chiron
Mill 6000
기술 세부 사항
- X축 이동 거리:
- 6,000 mm
- Y축 이동 거리:
- 630 mm
- 컨트롤러 모델:
- Siemens 840D
- 스핀들 속도 (최대):
- 12,000 rpm
제공
- 위치:
- Baden-Württemberg, 독일
– 거리: 약 8,888 km
- 가용성:
- 경매 종료 직후 바로
- 인도 조건:
- EXW
무료
설명
The machine spindle was replaced in 2021 (spindle hours approx. 7,300 h)!
The machine was completely overhauled in 2013!
The machine has undergone regular annual maintenance, repairs, and has been kept up to date technically by the manufacturer (preventive maintenance). The last service was carried out in January 2024.
TECHNICAL DETAILS
4 axes
X-axis travel: 6,000 mm
Y-axis travel: 630 mm
Z-axis travel: 550 mm
B-axis swivel range: ± 100°
Spindle speed: 12,000 rpm
Spindle torque: 140 Nm
Rapid traverse X/Y/Z: 60 m/min
Chip-to-chip time vertical: 3.0 sec. (3.3 sec. DIN)
Chip-to-chip time horizontal: 4.7 sec. (5.0 sec. DIN)
MACHINE DETAILS
Control system: Siemens 840D
Current type: 3/N/PE
Line frequency: 50/60 Hz
Operating voltage: 400 V
Control voltage: 220/24 V
Connected load: 52 kVA
Rated current: 75 A
Protection: 80 A
Weight: 19,500 kg
Operating hours: 77,374 h
EQUIPMENT
5-axis milling package (up to 5-axis simultaneous milling)
Scraper conveyor, discharge height: 1,050 mm
CIC preparation
Vacuum rotary filter KNOLL VRF250 (steel, cast iron, aluminium, plastic, brass)
High pressure 70 bar with high-pressure pump and variable flow valve
Rinsing gun per pendulum field
Emulsion mist extraction, 2 extraction blowers each 800 m³/h
Rotating viewing window left and right (1,400 mm from machine center)
Automatic loading doors
Central partition for pendulum operation
92 tool holders HSK-A63 (rear magazine)
Blow air
Tool life monitoring
Additional V24 RS232 in control cabinet
BDE/MDE interface (status: machine on, machine running, piece counter)
Marposs (Brankamp) collision monitoring CMS100
3D machine model for kinematic simulation in the CAM programming system
Hydraulic unit 210 bar, 2 clamping circuits, separate system clamping pressure per pendulum field, clamping pressure monitoring
Linear clamping system KOHN
8 pieces hydraulic vise KOHN Multi 2000 MFS 125/680 HD
Two-piece tread platform for the operator across the entire operating width of 6,000 mm
이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.
결제 처리
- 구입 부대 비용:
- 18 %
- 지불 조건:
- 100% 선불 결제
- 결제 방식:
은행 송금
제안 세부 정보
- 광고 ID:
- A22326617
- 참조 번호:
- AUC-2606277
- 업데이트:
- 마지막 업데이트: 20.07.2026
- 독점 제공:
- 경매에서만 구매 가능
견학
Montichiari FPT IndustrieVERUS
Schramberg DMG MORINLX2500SY/700 mit Fanuc Industrieroboter
Babberich JuaristiML-3
Madrid ANAYAKHVM 7000
Monheim am Rhein DMG MORICLX 450 V6
Nürtingen GF AgieCharmillesProgress V4
독일 MAZAKAJV-35/240
Nordrhein-Westfalen ANAYAKHVM 6000 P
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-신뢰의 인증 마크
신뢰 마크란 무엇입니까?
Machineseeker는 선정된 딜러에게 Machineseeker 신뢰 인증마크를 부여합니다. 발급 전에 숙련된 Machineseeker 직원에 의해 표준화되고 철저한 검사가 수행됩니다.
우리는 무엇을 점검합니까?
영업 허가증 또는 상업 등기부 등본의 확인
판매자의
우편 주소 확인
은행 연결의 검증
대표 번호의
전화
접근 가능성 확인
경제 정보
에는 부정적인 특성이 포함되어서는 안 됩니다
구매자 불만
은(는) 인증 마크 박탈로 이어질 수 있습니다이것이 구매자로서 귀하에게 어떤 의미가 있습니까?
Machineseeker 신뢰 씰을 통해 구매자는 직접 검증하지 않고도 매우 높은 확률로 정직하고 성실하게 거래하는 신뢰할 수 있는 판매자를 식별할 수 있습니다.
물론 구매 과정에서 의견 차이가 발생할 수 있습니다. Machineseeker는 Machineseeker에서 활동 중인 구매자 또는 판매자에 의한 법률 위반에 대해 책임을 지지 않습니다.