사출 성형기Cronoplast
Babyplast UAI I/12
사출 성형기
Cronoplast
Babyplast UAI I/12
VB 부가세 별도
€10,000
제조 연도
2021
상태
중고
(완전히 작동합니다)
위치
Erkelenz 

기본 정보
가격 및 위치
VB 부가세 별도
€10,000
- 위치:
- Erkelenz, 독일

전화하기
기술 세부 사항
치수 및 중량
총중량:
140 kg
엔진 및 변속기
배기량:
15 cm³
출력 세부사항
입력 전압:
400 V
입력 주파수:
50 헤르츠
입력 전류:
8 A
추가 세부 정보
분사 압력:
2,025 바
제안 세부 정보
- 광고 ID:
- A23338001
- 업데이트:
- 마지막 업데이트: 15.11.2026
설명
For sale: Babyplast auxiliary injection unit, type UAI I/12, manufactured in 2021, mobile on rollers, with touchscreen control. Autonomous injection unit for mounting on an injection molding machine or on the mold (e.g., for multi-component, overmolding, or insert applications).
Hfodpfj Akiavex Ah Iep
Technical data (according to the nameplate):
- Manufacturer: Cronoplast S.L., Abrera (Barcelona), Spain
- Type: Babyplast UAI I/12, schema BP338, serial no. UA0374, manufactured in 2021
- Total weight: 140 kg
- Input voltage: 400 V 3L+N or 230 V 3L
- Input frequency: 50/60 Hz
- Rated current: 7.5 A (400 V) or 11 A (230 V)
- Short-circuit current Icu: 3.5 kA
Technical data (according to manufacturer's specifications Babyplast I/12):
- Injection volume (displacement): 3 to 15 cm³ depending on the piston
- Piston diameter: 10 to 18 mm (5 interchangeable pistons; 10 mm = max. 4 cm³, 18 mm = max. 15 cm³)
- Injection pressure: approx. 815 to 2,025 bar depending on the piston
- Hydraulic injection unit with piston (no screw), therefore no screw diameter specification
- Mounting: directly to mold or machine, horizontally or vertically, via two standard flanges on a fixed or moving mold half
- Interface to the main machine via a few potential-free contacts, operates hydraulically and electronically independently
- Cooling water requirement: approx. 100 l/h
- Note: The unit does not have its own clamping unit, therefore no clamping force and no tie bar spacing. Overall length and width available upon request.
Equipment as shown in the photos:
- Touchscreen control panel with emergency stop, key switch, main switch, and pressure display
- Material hopper with conveying unit
- Connection cables, hoses, and hydraulic/pneumatic connections
- Operating manual (German, Rev. 10)
- DGUV-V3 inspection label
Used, signs of wear and tear as shown in the photos. The machine can be inspected during operation (appointment by arrangement). Disassembly and loading by the buyer; loading with a forklift is possible. Location: Erkelenz. Collection only.
Sale excludes any warranty, guarantee, and right of return.
이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.
Hfodpfj Akiavex Ah Iep
Technical data (according to the nameplate):
- Manufacturer: Cronoplast S.L., Abrera (Barcelona), Spain
- Type: Babyplast UAI I/12, schema BP338, serial no. UA0374, manufactured in 2021
- Total weight: 140 kg
- Input voltage: 400 V 3L+N or 230 V 3L
- Input frequency: 50/60 Hz
- Rated current: 7.5 A (400 V) or 11 A (230 V)
- Short-circuit current Icu: 3.5 kA
Technical data (according to manufacturer's specifications Babyplast I/12):
- Injection volume (displacement): 3 to 15 cm³ depending on the piston
- Piston diameter: 10 to 18 mm (5 interchangeable pistons; 10 mm = max. 4 cm³, 18 mm = max. 15 cm³)
- Injection pressure: approx. 815 to 2,025 bar depending on the piston
- Hydraulic injection unit with piston (no screw), therefore no screw diameter specification
- Mounting: directly to mold or machine, horizontally or vertically, via two standard flanges on a fixed or moving mold half
- Interface to the main machine via a few potential-free contacts, operates hydraulically and electronically independently
- Cooling water requirement: approx. 100 l/h
- Note: The unit does not have its own clamping unit, therefore no clamping force and no tie bar spacing. Overall length and width available upon request.
Equipment as shown in the photos:
- Touchscreen control panel with emergency stop, key switch, main switch, and pressure display
- Material hopper with conveying unit
- Connection cables, hoses, and hydraulic/pneumatic connections
- Operating manual (German, Rev. 10)
- DGUV-V3 inspection label
Used, signs of wear and tear as shown in the photos. The machine can be inspected during operation (appointment by arrangement). Disassembly and loading by the buyer; loading with a forklift is possible. Location: Erkelenz. Collection only.
Sale excludes any warranty, guarantee, and right of return.
이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.
공급자
참고: 무료로 등록하거나 로그인하세요, 모든 정보를 확인할 수 있습니다.
최근 온라인: 어제
등록일: 2023
20 온라인 광고
문의 보내기
전화기 & 팩스
+49 2433 ... 광고
귀하의 광고가 성공적으로 삭제되었습니다
오류가 발생했습니다










