로우 로더

Ebert TLS 55 ATV / Tele / 39,5to Nutzlast

Technical Data for EBERT TLS 43 ATV Special Low Loader:

Permissible king pin load: 19,000 kg
Permissible axle load: 36,000 kg
Gross vehicle weight: 55,000 kg
Unladen weight (per DIN): approx. 15,500 kg
Lower deck length i.L.: approx. 6,650 mm + 4,000 mm
Axle table length: 3,550 mm
External width: 2,550 mm
Loading edge/lower deck: approx. 200 mm – 350 mm
Sliding table length: 500 mm
Lower deck widening to: 3,050 mm
Lower deck extendable by: 4,000 mm
B-dimension: 13,300 mm
Entire vehicle flame-sprayed galvanized, with epoxy primer and 2K paint finish
Oversize warning signs front and rear, with red/white panels

Wheels: 13 x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F

Steering: TRIDEC DLS with Tritronic

Axles: 12,000 kg – DLS single wheel suspension, hydraulic steering and hydraulic suspension

Front high-bed:

Side panels 600 mm high
Corners at front of high-bed angled
Exterior-access doors in front corners (left and right)
Lockable storage box with lid behind the front wall; height 600 mm, width 2,480 mm, depth 7,500 mm
Spare wheel on high-bed, right side behind partition wall
Staircase on right side for access from lower deck to front high-bed
Hydraulic coupling for uncoupling on left side (6-way multi-faster coupling)
6 external lashing points, 3,000 kg each (fold-down lashing eyes) on high-bed
2 lashing points, 5,000 kg each, on upper longitudinal beams (to the rear)

Lower deck:

Climbing aids at the boom – pull-out
Outer frame thickness 8 mm
Lower deck extendable by 4,000 mm, lockable every 500 mm
With sliding table, lockable every 250 mm
28 external lashing points, 10,000 kg each, on the outer frame
24 plug-in sockets 90 x 90, evenly distributed for lower deck widening to 3,050 mm
Between extension beams, 50 mm hardwood planks are placed, protruding by 10 mm

Rear high-bed:

Front of rear high-bed sloped and perforated to allow retrofitting of ramp mount profiles (galvanized adapters)
At rear: ramp mount profiles (Altec) – C rails
8 external lashing points, 10,000 kg each, on rear high-bed
6 lashing points, 5,000 kg each, in the excavator recess
10 lashing points, 5,000 kg each, for oversize loads on the outer frame
Excavator recess can be closed at front and rear with insertable wooden floor plates

Electrics:

Use NATO spiral cable; power supplied by tractor unit
Roof beacon centered at rear
LED side marker lights
Standard vertically mounted taillight (LC5)
Work lamp on the high-bed to illuminate the lower deck
Oversize warning signs front and rear, with controls for uncoupling, safety sensor, and suspension pressure switch

Air:

Aluminum air reservoir 80 l
TEBS modulator
Slide-out lock left and right (valve located at rear high-bed sides)
Double release valve

Hydraulics:

Hydraulic system on high-bed for steering, suspension, and detachable gooseneck

Bsdpfsyfu N Aox Ah Decw
Accessories:

2 x 4 pieces hardwood planks for lower deck widening and intermediate table
2 wheel chocks for uncoupling
4 wheel chocks

On request, we can provide a leasing or financing offer. Mr. Ebert (phone...) will be happy to assist you. Further information can be found on our homepage. Subject to errors and prior sale.

이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.