작업 플랫폼 세미트레일러FAYMONVILLE
MAX Trailer MAX410 Ballastauflieger
작업 플랫폼 세미트레일러
FAYMONVILLE
MAX Trailer MAX410 Ballastauflieger
상태
중고
위치
Essen 

기계 정보
가격 및 위치
- 판매자 위치:
- Heegstraße 6-8, 45356 Essen, 독일

전화하기
기술 세부 사항
- 최대 적재 중량:
- 44,420 kg
- 총중량:
- 53,000 kg
- 차축 구성:
- 3축
- 최초 등록:
- 04/2025
- 다음 검사 (TÜV):
- 04/2026
- 적재 공간 길이:
- 11,500 mm
- 총 폭:
- 2,540 mm
- 장비:
- ABS
제안 세부 정보
- 광고 ID:
- A21520922
- 참조 번호:
- 37347
- 업데이트:
- 마지막 업데이트: 17.03.2026
설명
You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.
Excerpt from the equipment list. Full specifications available upon request.
Cargo Area:
* Cargo deck with approximately 30 mm thick hardwood floor
* 9 pairs of folding lashing rings (LC 10,000 daN)
* 10 pairs of stake pockets in the outer frame for approx. 100 x 50 mm plug-in stakes
Landing Legs:
* Hydraulic landing legs
Tyres:
* Tyres 385/65 R 22.5 – MICHELIN MULTI High Load 164K
TPMS:
* TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck is via standardized EBS interface per ISO 11992. For correct display, the truck must be equipped to transmit and display this data.
Axles and Suspension:
* BPW axles, technical axle load 10,000 kg each; first axle hydro-mechanically steered, second fixed, third hydro-mechanically forced steering, mounted on turntable
* Air suspension with raise and lower valve
Braking System:
* WABCO braking system per EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit
Electrical System:
* Electrical system per EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets in accordance with ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Steel Structure:
Dedpfeyu Eu Iox Ah Eskp
* High-strength fine-grain steel construction
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa); S690QL/S700MC (yield strength 690 MPa)
Painting:
* Entire steel structure automatically blast-cleaned after welding using a shot-blasting system
* Second blast cleaning with corundum for optimal coating adhesion
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimum corrosion protection
* Final coating with 2 layers of 2K topcoat, single color in RAL 9005 Deep Black per RAL system 841GL
* Rear section metallized and painted in RAL 9010 (Pure White)
* Rims painted silver-grey
* Paint system tested by salt spray test to ISO 9227-NSS
* Sealant wax applied to cavities
Included Accessories:
* Cargo deck with approx. 30 mm thick hardwood floor
* 2” kingpin
* One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high
* At galvanized front connection bar: DUOMATIC air couplings
* Storage for approx. 1,000 mm plug-in stakes in the center beam at the rear
* At gooseneck and rear plate, left and right, each with a holder for warning plates including socket
* White reflective tape according to EU regulations on sides and red at the rear
* 10 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes in the outer frame of the cargo deck
* European reflective markers (red/yellow) on trailer rear
* Bracket for rotating beacon at the rear of trailer
* Mudflap at the rear of trailer
* Manual and documentation on USB stick
* Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump guard
* 4 wheel chocks with holder at front wall
* Rear and front steering can be operated by cable remote control with push buttons, featuring axle single-track control (without installation in tractor unit)
* Electro-hydraulic power pack
* 6 pairs of galvanized plug-in stakes, approx. 100 x 50 mm, approx. 1,000 mm high
* 5 pairs of crosswise mounted stake pocket rails in load floor for approx. 100 x 50 mm plug-in stakes
* One INOX toolbox, approx. 1,200 x 460 x 55
이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.
Excerpt from the equipment list. Full specifications available upon request.
Cargo Area:
* Cargo deck with approximately 30 mm thick hardwood floor
* 9 pairs of folding lashing rings (LC 10,000 daN)
* 10 pairs of stake pockets in the outer frame for approx. 100 x 50 mm plug-in stakes
Landing Legs:
* Hydraulic landing legs
Tyres:
* Tyres 385/65 R 22.5 – MICHELIN MULTI High Load 164K
TPMS:
* TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck is via standardized EBS interface per ISO 11992. For correct display, the truck must be equipped to transmit and display this data.
Axles and Suspension:
* BPW axles, technical axle load 10,000 kg each; first axle hydro-mechanically steered, second fixed, third hydro-mechanically forced steering, mounted on turntable
* Air suspension with raise and lower valve
Braking System:
* WABCO braking system per EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit
Electrical System:
* Electrical system per EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets in accordance with ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Steel Structure:
Dedpfeyu Eu Iox Ah Eskp
* High-strength fine-grain steel construction
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa); S690QL/S700MC (yield strength 690 MPa)
Painting:
* Entire steel structure automatically blast-cleaned after welding using a shot-blasting system
* Second blast cleaning with corundum for optimal coating adhesion
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimum corrosion protection
* Final coating with 2 layers of 2K topcoat, single color in RAL 9005 Deep Black per RAL system 841GL
* Rear section metallized and painted in RAL 9010 (Pure White)
* Rims painted silver-grey
* Paint system tested by salt spray test to ISO 9227-NSS
* Sealant wax applied to cavities
Included Accessories:
* Cargo deck with approx. 30 mm thick hardwood floor
* 2” kingpin
* One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high
* At galvanized front connection bar: DUOMATIC air couplings
* Storage for approx. 1,000 mm plug-in stakes in the center beam at the rear
* At gooseneck and rear plate, left and right, each with a holder for warning plates including socket
* White reflective tape according to EU regulations on sides and red at the rear
* 10 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes in the outer frame of the cargo deck
* European reflective markers (red/yellow) on trailer rear
* Bracket for rotating beacon at the rear of trailer
* Mudflap at the rear of trailer
* Manual and documentation on USB stick
* Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump guard
* 4 wheel chocks with holder at front wall
* Rear and front steering can be operated by cable remote control with push buttons, featuring axle single-track control (without installation in tractor unit)
* Electro-hydraulic power pack
* 6 pairs of galvanized plug-in stakes, approx. 100 x 50 mm, approx. 1,000 mm high
* 5 pairs of crosswise mounted stake pocket rails in load floor for approx. 100 x 50 mm plug-in stakes
* One INOX toolbox, approx. 1,200 x 460 x 55
이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.
공급자
참고: 무료로 등록하거나 로그인하세요, 모든 정보를 확인할 수 있습니다.
최종 온라인: 지난주
등록일: 2003
69 온라인 광고
문의 보내기
전화기 & 팩스
+49 201 8... 광고
이 광고들도 당신에게 관심이 있을 수 있습니다.
소형 광고
Essen
8,730 km
작업 플랫폼 세미트레일러
FAYMONVILLEMAX Trailer MAX410 Ballastauflieger
FAYMONVILLEMAX Trailer MAX410 Ballastauflieger
소형 광고
Urk
8,703 km
Atlas Copco SF8 + FF 오일 프리 에어 컴프레
Atlas CopcoSF8 + FF HC
Atlas CopcoSF8 + FF HC
소형 광고
Lüdenscheid
8,717 km
나사 제조 기계
HilgelandCH1 KHA
HilgelandCH1 KHA
소형 광고
Gusselby
7,744 km
공기 압축기
Atlas CopcoGA-37
Atlas CopcoGA-37
소형 광고
독일
8,579 km
압축기
Kaeser/Atlas CopcoCS75/AS44/BS60/GA45/TD51/TF171/TE76
Kaeser/Atlas CopcoCS75/AS44/BS60/GA45/TD51/TF171/TE76
소형 광고
Hohenems
8,906 km
스크류 압축기 GA30VSD+FF
Atlas CopcoGA30VSD+FF
Atlas CopcoGA30VSD+FF
소형 광고
Hessisch Lichtenau
8,613 km
스크류 컴프레서 컴프레서
KaeserASD 32 mit Wärmerückgewinnung
KaeserASD 32 mit Wärmerückgewinnung
소형 광고
Oelde
8,644 km
애틀라스 콥코 GA7-13 VSD
Atlas CopcoGA7- 13 VSD
Atlas CopcoGA7- 13 VSD
소형 광고
Montigny-en-Ostrevent
9,003 km
스크류 압축기
KaeserAS31
KaeserAS31
소형 광고
Albias
9,614 km
냉매 건조기가 통합된 오일 주입식 로터리 스크류 압축기 ATLAS COPCO GA15 FF
ATLAS COPCOGA15 FF
ATLAS COPCOGA15 FF
귀하의 광고가 성공적으로 삭제되었습니다
오류가 발생했습니다






























































































