트레일러Fliegl
GLADIATOR - Löschcontainer Feuerwehr
트레일러
Fliegl
GLADIATOR - Löschcontainer Feuerwehr
상태
신규
(완전히 작동합니다)
위치
Triptis 

기계 정보
가격 및 위치
- 위치:
- Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland

전화하기
기술 세부 사항
- 공차 중량:
- 8,420 kg
- 차축 구성:
- 2축
- 적재 공간 길이:
- 5,620 mm
- 적재 공간 너비:
- 2,390 mm
- 적재 공간 높이:
- 1,910 mm
- 총 길이:
- 8,590 mm
- 총 높이:
- 2,151 mm
- 타이어 크기:
- 235/75 R17,5"
- 타이어 상태:
- 100 퍼센트
- 장비:
- 크레인
제안 세부 정보
- 광고 ID:
- A22812805
- 업데이트:
- 마지막 업데이트: 24.09.2026
설명
Please note: archive images!
Demonstration vehicle
Fliegl "Gladiator" – mobile extinguishing vehicle for burning electric vehicles and cars
#Operating principle
- Burning vehicle is pulled into the container by recovery crane and hydraulic moving floor
- Watertight tailgate is closed, container is flooded with extinguishing water from the integrated tanks (up to approx. seat height)
- Battery is cooled with oxygen excluded
- After cooling, the contaminated extinguishing water is pumped back into the tanks and can be disposed of properly
Ndedoz Ehfgspfx Ai Tsb
- Crane and moving floor operated from a safe distance
- Suitable for fire brigades, municipalities and technical relief services (THW)
#Technical data
- Unladen weight: approx. 8,420 kg
- Extinguishing water volume: approx. 7,500 l
- Overall length excl. drawbar: approx. 6,960 mm
- Overall height excl. recovery crane: approx. 2,151 mm
- Internal length: approx. 5,620 mm
- Internal width top/bottom: approx. 1,320 / 2,390 mm
- Internal height at centre: approx. 1,910 mm
- Coupling height: hydraulically adjustable
- Drawbar length: approx. 1,630 mm
#Body
- Robust, fire-resistant extinguishing vehicle made of extremely hard steels
- Integrated extinguishing water supply approx. 7,500 l in 3 tanks – container fully flooded in approx. 10 minutes
- Filler neck front right top, outlet neck front right bottom (in direction of travel)
- Water pumps and filters for returning the contaminated extinguishing water
- Front inspection window for viewing the extinguishing water tank, top left in direction of travel
- Hydraulic, watertight tailgate with manual locking
- 2 pairs of clamping screws with toggle fasteners on the tailgate
- Hydraulically movable floor, rear section with steel barbs to prevent slipping
- Recovery crane with control panel and heat shield
- Standing platform at centre, access steps at front left in direction of travel
- Sheet steel mudguards with spray-suppression mudflaps
- 2 wheel chocks
#Towing equipment
- Centre-axle trailer, drawbar with certified 40 mm drawbar eye, road haulage version
- Hydraulic height adjustment for optimum loading angle
- Drawbar easily removable – container can remain on its wheels at the incident site
- Suitable for trucks, tractors and hook-lift vehicles
#Lashing eyes
- 2 pairs of lashing eyes, 5 t tensile force each (1x front top at the side, 1x rear top)
#Axles and brakes
- Tandem axle assembly
- Dual-line compressed-air braking system, spring-brake parking brake
- 2 non-interchangeable coupling heads at front with connecting hoses
- EBS "Wabco" with EBS socket at front (without connecting cable)
- Incl. brake force regulation
#Electrics
- 12 volt, multi-chamber lamps
- No side LED lighting, side reflectors
- 1x 7-pin non-interchangeable plug at front with connecting cable
#Paintwork
- Container RAL 3002 carmine red, rims factory silver
Please note: archive images!
Demonstration vehicle
Fliegl "Gladiator" – mobile extinguishing vehicle for burning electric vehicles and cars
#Operating principle
- Burning vehicle is pulled into the container by recovery crane and hydraulic moving floor
- Watertight tailgate is closed, container is flooded with extinguishing water from the integrated tanks (up to approx. seat height)
- Battery is cooled with oxygen excluded
- After cooling, the contaminated extinguishing water is pumped back into the tanks and can be disposed of properly
Ndedoz Ehfgspfx Ai Tsb
- Crane and moving floor operated from a safe distance
- Suitable for fire brigades, municipalities and technical relief services (THW)
#Technical data
- Unladen weight: approx. 8,420 kg
- Extinguishing water volume: approx. 7,500 l
- Overall length excl. drawbar: approx. 6,960 mm
- Overall height excl. recovery crane: approx. 2,151 mm
- Internal length: approx. 5,620 mm
- Internal width top/bottom: approx. 1,320 / 2,390 mm
- Internal height at centre: approx. 1,910 mm
- Coupling height: hydraulically adjustable
- Drawbar length: approx. 1,630 mm
#Body
- Robust, fire-resistant extinguishing vehicle made of extremely hard steels
- Integrated extinguishing water supply approx. 7,500 l in 3 tanks – container fully flooded in approx. 10 minutes
- Filler neck front right top, outlet neck front right bottom (in direction of travel)
- Water pumps and filters for returning the contaminated extinguishing water
- Front inspection window for viewing the extinguishing water tank, top left in direction of travel
- Hydraulic, watertight tailgate with manual locking
- 2 pairs of clamping screws with toggle fasteners on the tailgate
- Hydraulically movable floor, rear section with steel barbs to prevent slipping
- Recovery crane with control panel and heat shield
- Standing platform at centre, access steps at front left in direction of travel
- Sheet steel mudguards with spray-suppression mudflaps
- 2 wheel chocks
#Towing equipment
- Centre-axle trailer, drawbar with certified 40 mm drawbar eye, road haulage version
- Hydraulic height adjustment for optimum loading angle
- Drawbar easily removable – container can remain on its wheels at the incident site
- Suitable for trucks, tractors and hook-lift vehicles
#Lashing eyes
- 2 pairs of lashing eyes, 5 t tensile force each (1x front top at the side, 1x rear top)
#Axles and brakes
- Tandem axle assembly
- Dual-line compressed-air braking system, spring-brake parking brake
- 2 non-interchangeable coupling heads at front with connecting hoses
- EBS "Wabco" with EBS socket at front (without connecting cable)
- Incl. brake force regulation
#Electrics
- 12 volt, multi-chamber lamps
- No side LED lighting, side reflectors
- 1x 7-pin non-interchangeable plug at front with connecting cable
#Paintwork
- Container RAL 3002 carmine red, rims factory silver
Please note: archive images!
공급자
참고: 무료로 등록하거나 로그인하세요, 모든 정보를 확인할 수 있습니다.
등록일: 2006
197 온라인 광고
문의 보내기
전화기 & 팩스
+49 36482... 광고
귀하의 광고가 성공적으로 삭제되었습니다
오류가 발생했습니다













































