평상 및 타포린이 있는 트레일러FLIEGL
SDS 390 Gardine Standard Ultralight Coil
평상 및 타포린이 있는 트레일러
FLIEGL
SDS 390 Gardine Standard Ultralight Coil
EXW 고정 가격 부가세 별도
€25,990
제조 연도
2021
상태
중고
위치
Triptis 

사진은 보여줍니다
지도 표시
기계 정보
가격 및 위치
EXW 고정 가격 부가세 별도
€25,990
- 위치:
- Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland

전화하기
기술 세부 사항
- 공차 중량:
- 5,800 kg
- 최대 적재 중량:
- 29,200 kg
- 총중량:
- 35,000 kg
- 차축 구성:
- 3축
- 최초 등록:
- 12/2021
- 적재 공간 길이:
- 13,650 mm
- 적재 공간 너비:
- 2,480 mm
- 적재 공간 높이:
- 2,790 mm
- 서스펜션:
- 공기
- 타이어 크기:
- 385/65 R22.5"
- 색상:
- 은색
제안 세부 정보
- 광고 ID:
- A19083991
- 참조 번호:
- 59340
- 업데이트:
- 마지막 업데이트: 06.05.2025
설명
The images are archived; the vehicle may still be in use!
Semi-trailer chassis for freight forwarding
Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil trough approx. 8,040 mm long, 6 coil supports (coil pockets inside 82 x 52 mm), coil cover with screen-printed panels and steel joists, 2 split-belt covers for coil trough, each approx. 293 mm wide, net weight approx. 13 kg per cover, slightly slanted outer frame with "Load-Lock profile" for tensioning straps. Note: To attach the straps in conjunction with the side walls, the side walls must be opened! 9 pairs of 5-ton lashing eyes recessed in the coil trough area, 24-ton 2-speed landing gear, single-side operation, with straight lower section, without thrust compensation. Note: Free support leg corner dimension or free rearward swing radius approx. 1,930 mm, without supports, extension ladder on the Rear, side door catches, 2 wheel chocks with brackets, aluminum side impact protection, bracket transverse to the side member and attached to the side member for supporting aluminum slats, aluminum underride protection, half-shell fenders with anti-spray flaps according to EC regulations, rear bumper, 1 plastic toolbox, 2 pairs of stake pockets recessed into the outer frame, approx. 72 x 42 mm internal dimensions, at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 19219,
2 stake pockets recessed centrally in the floor, approx. 72 x 42 mm internal dimensions at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 192198. Note: Stakes pockets/inserted stakes are not designed for the sole load securing of long materials, pipes, etc. without wrapping.
Axles + Suspension
SAF disc brake axles with 430 mm disc diameter, "Axle/Chassis" Laser-measured to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tonnes gross vehicle weight, air suspension,
without lift axle
Giedpjwhp A Dofx Ah Tol
These images are archive images; the vehicle may still be in use!
이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.
Semi-trailer chassis for freight forwarding
Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil trough approx. 8,040 mm long, 6 coil supports (coil pockets inside 82 x 52 mm), coil cover with screen-printed panels and steel joists, 2 split-belt covers for coil trough, each approx. 293 mm wide, net weight approx. 13 kg per cover, slightly slanted outer frame with "Load-Lock profile" for tensioning straps. Note: To attach the straps in conjunction with the side walls, the side walls must be opened! 9 pairs of 5-ton lashing eyes recessed in the coil trough area, 24-ton 2-speed landing gear, single-side operation, with straight lower section, without thrust compensation. Note: Free support leg corner dimension or free rearward swing radius approx. 1,930 mm, without supports, extension ladder on the Rear, side door catches, 2 wheel chocks with brackets, aluminum side impact protection, bracket transverse to the side member and attached to the side member for supporting aluminum slats, aluminum underride protection, half-shell fenders with anti-spray flaps according to EC regulations, rear bumper, 1 plastic toolbox, 2 pairs of stake pockets recessed into the outer frame, approx. 72 x 42 mm internal dimensions, at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 19219,
2 stake pockets recessed centrally in the floor, approx. 72 x 42 mm internal dimensions at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 192198. Note: Stakes pockets/inserted stakes are not designed for the sole load securing of long materials, pipes, etc. without wrapping.
Axles + Suspension
SAF disc brake axles with 430 mm disc diameter, "Axle/Chassis" Laser-measured to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tonnes gross vehicle weight, air suspension,
without lift axle
Giedpjwhp A Dofx Ah Tol
These images are archive images; the vehicle may still be in use!
이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.
공급자
문의 보내기
전화기 & 팩스
+49 36482... 광고
귀하의 광고가 성공적으로 삭제되었습니다
오류가 발생했습니다








