섀시 교체
Fliegl TWP 180 Jumbo Z mit Staplerhalterung

고정 가격 부가세 별도
€24,700
상태
신규
위치
Triptis 독일
섀시 교체 Fliegl TWP 180 Jumbo Z mit Staplerhalterung
섀시 교체 Fliegl TWP 180 Jumbo Z mit Staplerhalterung
섀시 교체 Fliegl TWP 180 Jumbo Z mit Staplerhalterung
more Images
Fliegl TWP 180 Jumbo Z mit Staplerhalterung
Fliegl TWP 180 Jumbo Z mit Staplerhalterung
Fliegl TWP 180 Jumbo Z mit Staplerhalterung
사진은 보여줍니다
지도 표시

기계 정보

기계 명칭:
섀시 교체
제조업체:
Fliegl
모델:
TWP 180 Jumbo Z mit Staplerhalterung
기계 번호:
207ad28f83705ed0d38a4f174
상태:
새로운

가격 및 위치

고정 가격 부가세 별도
€24,700
판매자 위치:
Oberpöllnitzer Straße 8, 07819 Triptis, 독일 독일
전화하기

기술 세부 사항

차축 구성:
2축
총중량:
14 kg
공차 중량:
3 kg
최대 적재 중량:
11 kg
타이어 크기:
235/75 r17,5

제안 세부 정보

광고 ID:
A8265536
참조 번호:
20437522
업데이트:
마지막 업데이트: 22.10.2024

설명

Further information
Chassis Wechel central axle trailer
Hjdpoi Ri Iajfx Aatofn
Fine-grained steel welded construction
Front stop, longitudinally adjustable and foldable
Pair of removable guide rollers, front and rear
4 container locks with sturdy outriggers on 20-basefor swap bodies 7.15 and 7.45 flush with rear (for 7.15 swap bodies not flush with rear, forklift pockets/frame protrude)
Telescopic front support leg
1 pair of front gear support legs, with straight lower section and single-sided operation in FR right
Wheel chocks with holder
Aluminum side bumpers
Steel underride guard
Half-shell mudguards
Bracket for truck-mounted forklift at the rear, including 2 fork pockets, 2 extendable support tubes, bracket for chain safety device with pin. Underride guard with light unit can be folded away. Including 2 loose rubbers to protect the rear wall, we recommend counterweight! Partially low ground clearance with forklift, poor tracking behavior possible, without warranty! (Forklift tare weight up to max. 1500 kg for trailers). (With proximity switch for forklift control in conjunction with lift axle)The axles are shifted to the rear by the forklift bracket, observe load distribution when driving without forklift. Customer risk! (For swap body trailers, driving with a forklift is only permitted in conjunction with a swap body) Forklift bracket as AU 203670 adapted to 7.45 m swap bodies
Counterweight at the front between the frames, approx. 300 kg, if necessary, exact check still required
Towing device central axle trailer
Tow bar with tested 50 mm towing eye, forwarding agent version (not suitable for trucks with tail lift, or exact testing still required if ordered)
Lower coupler drawbar
without length adjustment drawbar
Axles + suspension
SAF drum brake axles of the manufacturer's choice
Axle/chassis laser-measured Reduction of tire wear and fuel consumption
Air suspension
Brake system
2-line compressed air brake systemColor-coded line routing for easy servicing.
Spring-applied parking brake
Duomatic connection at the front, with connection line to the engine trolley, in FR-left
Duomatic connection at the front, with connection line to the motor vehicle, connection in FR-right
EBS, electronic brake system with EBS plug at the front, with connecting cable, in FR-left
Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS!
with lifting & lowering valve, holding function in each case in lowering / lifting position
Vehicle - driving stability system
Wheels and tires
235/75 R17.5 tires of the manufacturer's choice
Steel rims in twin arrangement, factory silver
Electrical system
24 volt, 4 x 3 chamber lights + 1 round reversing light and + 1 round rear fog light, amber LED lighting on the side, lights mounted in a protected position!
2 white position lights at the front
2 white/red rear lane departure lights
1 x 15-pin plug at the front, with connecting cable, in FR-left
2 x 7-pin sockets in FR left rear for truck-mounted forklift
1 x 15-pin socket in FR left rear for truck-mounted forklift
LED work lights on both sides behind the 2nd axle (switched via reversing light)
Additional LED work light(s) at the rear, switched via reversing light
Approval / plates
Germany
with Dekra approval and certificate (according to §13 EG - FGV)
24/7 service hotline
Prepared for single-line license plate holder
Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear
Paint finish
Frame

이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.

공급자

등록일: 2006

153 온라인 광고

전화하기

문의 보내기

토지us 
독일
오스트리아
스위스
미국
영국
프랑스
벨기에
스페인
멕시코
이탈리아
네덜란드
폴란드
러시아 연방
벨라루스(벨라루스 공화국)
우크라이나
에스토니아
터키
뉴질랜드
아일랜드
체코 공화국
덴마크
핀란드
스웨덴
노르웨이
룩셈부르크
그리스
리투아니아
라트비아
아이슬란드
포르투갈
브라질
베네수엘라
아르헨티나
헝가리
슬로바키아
루마니아
몰도바
슬로베니아
세르비아
몬테네그로
알바니아
크로아티아
불가리아
북마케도니아
보스니아 헤르체고비나
이스라엘
이집트
모로코
인도
인도네시아
대한민국
일본
태국
말레이시아
베트남
China
대만
이란
방글라데시
아프가니스탄
참고: 귀하의 요청은 기계 카테고리의 모든 판매자에게 전달됩니다. 이를 통해 매우 많은 제안을 받을 수 있습니다.
요청을 보낼 수 없습니다. 나중에 다시 시도하십시오.

전화기 & 팩스

+49 36482... 광고