호막 옵티마트 KAL210/6/A20/S2

HOMAG Optimat KAL210/6/A20/S2

Edgebander manufactured in 2008. This HOMAG Optimat KAL210/6/A20/S2 is designed for jointing straight workpiece edges, gluing, and finishing various edging materials up to 20 mm thickness. It features a feed rate of 18 - 25 m/min and accommodates workpiece thickness from 8 to 60 mm. If you are looking to get high-quality edge banding capabilities, consider the HOMAG Optimat KAL210/6/A20/S2 machine we have for sale. Contact us for further details.

• Spindle motor power: Joint milling unit: 2 motors each 3 kW; End trimming unit: 2 motors each 0.8 kW; Pre-milling unit: 2 motors each 1.5 kW
• Spindle speed range: Joint milling unit: 9,000 1/min; End trimming unit: 12,000 1/min; Pre-milling unit: 12,000 1/min
• Single-sided machine for jointing straight workpiece edges, glueing and finishing of various edging materials from the roll or as strips, up to 20 mm edge thickness, in longitudinal and transverse pass.
• Feed rate: 18 - 25 m/min.
• Feed rate with form milling FK11 max. 20 m/min.
• Workpiece thickness: 8 - 60 mm
• Edge material strip max.: 0.4 - 20 mm
• Edge material roll: 0.3 - 3 mm
• Joint milling unit with electro-pneumatic control of both motors
• Gluing unit A20 - 2 rollers
• Quickmelt gluing unit
• Temperature control electronic with LED display
Dksdszrg Icspfx Ab Dsr
• Magazine 2 rolls manual
• For solid edges, strips and rolls
• 1 edge feed
• 2 roll holders
• Pressure zone C
• 1 driven pre-press roll diameter 150 mm
• 6 pressing rollers diameter 70 mm
• Motors can be swivelled manually for bevel cutting
• Shape trimming unit FK11 manual
• For machining the edge protrusions on the upper and lower edge of the workpiece and for milling of the workpiece front and rear edge
• Finishing unit profile PN10
• For chamfering or rounding pre-milled PVC edges
• Finishing unit consisting of finishing unit glue joint and buffing unit
• Automation package chamfer / radius KAL210/6/A20
• Automatic adjustment of infeed ruler
• Automatic adjustment of pressure zone
• Pneumatic adjustment from chamfer to straight cut
• Pneumatic adjustment of the trimming motors for flush or projection trimming
• Pneumatic adjustment of pre-milling unit for flush or projection milling
• Automatic adjustment from chamfer to radius milling for form milling
• Pneumatic adjustment PN10 / FA11
• Electronic height adjustment
• Note: The specifications and descriptions are a copy of the order confirmation at that time. Data are for information and are not binding.