광폭 벨트 샌더
HOUFEK SPB 1350 BULDOG 7

시작가
€12,000
제조 연도
2020
상태
중고 (완전히 작동합니다)
위치
Sachsen 독일
광폭 벨트 샌더 HOUFEK SPB 1350 BULDOG 7
광폭 벨트 샌더 HOUFEK SPB 1350 BULDOG 7
광폭 벨트 샌더 HOUFEK SPB 1350 BULDOG 7
광폭 벨트 샌더 HOUFEK SPB 1350 BULDOG 7
광폭 벨트 샌더 HOUFEK SPB 1350 BULDOG 7
광폭 벨트 샌더 HOUFEK SPB 1350 BULDOG 7
HOUFEK SPB 1350 BULDOG 7
HOUFEK SPB 1350 BULDOG 7
HOUFEK SPB 1350 BULDOG 7
HOUFEK SPB 1350 BULDOG 7
HOUFEK SPB 1350 BULDOG 7
HOUFEK SPB 1350 BULDOG 7

기본 정보

기계 명칭:
광폭 벨트 샌더
제조업체:
HOUFEK
모델:
SPB 1350 BULDOG 7
제조 연도:
2020
상태:
사용 준비됨 (중고)
기능성:
완전히 작동합니다

기술 세부 사항

가공 가능한 재료 / 제품

가공물 높이 (최대):
160 mm

추가 세부 정보

연마 벨트 길이:
1,370 mm
연마 벨트 폭:
2,620 mm

제공

위치:
Sachsen, 독일 독일 – 거리: 약 8,508 km
가용성:
경매 종료 직후 바로
인도 조건:
EXW
분해 및 적재 비용:
현장 인수:
무료
배송비:

설명

TECHNICAL DETAILS


Sanding units
Working roller, 1st unit: Steel roller, Ø 200 mm
Working roller, 2nd unit: Rubber roller, Ø 200 mm, 45 Sh
Sanding belt dimensions: 1,370 × 2,620 mm
Sanding belts: 1 per sanding unit
Sanding unit motor power: 2 × 15 kW (20 hp)
Sanding belt speed: 3–18 m/s, frequency-controlled


PS30E segmented sanding pad
Segment width: 30 mm
Edge segment adjustment: ±1–3 segments
Pressure adjustment: 0.5–2.5 bar, manual
Sanding pad construction: 0.5 mm steel plate, rubber, felt and graphite


Table and feed
Table height: 900 mm
Table design: Fixed table with movable sanding unit
Workpiece height: 3–160 mm
Feed belt speed: 3–15 m/min, frequency-controlled
Infeed table extension: 300 mm
Outfeed table extension: 300 mm


Control system
Control system: NC machine control with 10.1" B&R touchscreen


Workpiece cleaning module
Cleaning brush: Rotating, nylon, Ø 100 mm
Motor power: 1.5 kW (2 hp)
Dust extraction connection: Ø 180 mm


Electrical connection
Voltage: 400 V
Frequency: 50 Hz


EQUIPMENT
Automatic star-delta motor starting
Motorised lifting of the sanding units
Pneumatic lifting of the sanding rollers on the 1st and 2nd units, operated via the front control panel
Ammeter for measuring the current drawn by the sanding unit
Sanding belt oscillation control with optoelectronic infrared sensor
Automatic feed belt centring
Workpiece height positioner
Synchronisation of lowering and lifting with the feed belt
Automatic table positioning to preset positions
Digital display of feed belt speed
Two-zone intermittent blow-off device with oscillating nozzles for cleaning the sanding belt
Rubber-coated pressure rollers
Emergency stop with pneumatic disc brake on the main motor
Mechanical limitation of maximum stock removal
Sound insulation
Vacuum table
Vacuum pump with sound insulation
Workpiece cleaning module at the machine outfeed, outside the machine
Design compliant with CE electrical and safety standards

Note: No warranty is given for accessories. The item is sold “as seen”. Prospective buyers must verify the completeness of the item on site. 



이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.

결제 처리

구입 부대 비용:
18 %
지불 조건:
100% 선불 결제
지불 방식:
Vorkasse Überweisung Icon은행 송금
청구서는 최고 입찰가에 해체/적재 및 배송 비용, 구매 부대비용, 법정 부가가치세가 추가되어 발행됩니다.

제안 세부 정보

광고 ID:
A23342243
참조 번호:
AUC-2611413
업데이트:
마지막 업데이트: 16.11.2026
독점 제공:
경매에서만 구매 가능

연락처

Luca Miethe
담당자: Luca Miethe
기계 ID: 23342243
SiegelSiegel

Machineseeker 구매자 보호

에스크로 계좌를 통한 안전한 결제
철저하게 검증된 판매자
개인 맞춤 및 다국어 지원
구매 대금은 물품 인도 후에 지급됩니다.

견학

현장 확인 가능
기계에 전원이 들어가 있습니다
Machineseeker는 원칙적으로 기계의 현장 확인을 권장합니다.
모든 정보는 최선의 지식과 양심에 따라 제공됩니다 – 현장에서 직접 확인하십시오.

공급자

Trustseal
상업용 전문 판매자
2016부터 Machineseeker에서
Sachsen, 독일 독일
거리: 약 8,409 km

여기에 귀하의 기계가 놓일 수 있습니다

1번과 함께 경매

몇 주 만에 판매하실 수 있습니다!
최고가에 판매합니다!
고정 비용과 위험 없이 판매합니다!
또는 전화하십시오 +49 201 857 861 10
협력을 논의하다
같은 위치의 상품
경매
실내 유리 시공 로봇 SmartLift SL 280
실내 유리 시공 로봇 SmartLift SL 280
실내 유리 시공 로봇 SmartLift SL 280
실내 유리 시공 로봇 SmartLift SL 280
실내 유리 시공 로봇 SmartLift SL 280
실내 유리 시공 로봇 SmartLift SL 280
실내 유리 시공 로봇 SmartLift SL 280
실내 유리 시공 로봇 SmartLift SL 280
종료까지 
d  h  min  s  경매가 종료되었습니다
독일 Sachsen
8,508 km
실내 유리 시공 로봇
SmartLiftSL 280
buyer-protection

Auction Conditions

The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.

  1. Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
  2. All prices and bids are net prices and do not include VAT.
  3. Stated dismantling and loading costs are binding.
  4. All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
  5. Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
  6. The duration of an auction may be subject to change.
  7. By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
  8. Submitted direct or maximum bids are binding.
  9. Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
  10. The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
  11. In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
  12. The General Auction Terms of Machineseeker Group GmbH apply.