접는 기계Köllschen
AM 2000x20
접는 기계
Köllschen
AM 2000x20
제조 연도
1976
상태
중고
위치
독일 

사진은 보여줍니다
지도 표시
기계 정보
가격 및 위치
- 위치:
- D - Nordrhein-Westfalen
전화하기
제안 세부 정보
- 광고 ID:
- A2669620
- 참조 번호:
- WKG 1630
- 업데이트:
- 마지막 업데이트: 19.03.2025
설명
General / technical data:
Heavy duty mechanical swing bending machine of solid welded construction in a very good condition.
working width:2000mm
material thickness for steel ST 50 max.: 20mm
opening of the upper beam (clamping beam):max. 475mm
Adjustability of the bending beam: 200mm motorized height adjustment
Bending angle: 130° adjustable by electric angle input
Kdodpfx Aaocvtbyjtou
upper beam speed:6mm/ sec
Bending beam speed:1,25 rpm ( approx. 90sec for 90° bending)
Backgauge:motorized adjustable from 50-999mm, with digital length display
Machine dimensions: (h x w x d) 3600x 4350 x 4400mm (without pit / with bending beam platform).
dimensions switch cabinet:(h x w x d) 1800 x 1200 x 400mm
drive power bending drive: 30KW
drive power upper beam (clamping beam): 22KW
Power supply:500Volt 50 HZ / control voltage 220Volt
Weight: 24.500 kg
Accessories / special equipment:
- 5 sets of bending toolseach consisting of clamping and bending rail R 8, R 12, R 15,R 20, R40.
- Folding back gauge
- Central lubrication
- machine documentation
Remark:
- Machine comes from a repair shop
- For the machine a pit 900mm deep (foundation) is needed. The substructure of the slewing drive shown on the pictures is only for test run and demonstration purposes.
이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.
Heavy duty mechanical swing bending machine of solid welded construction in a very good condition.
working width:2000mm
material thickness for steel ST 50 max.: 20mm
opening of the upper beam (clamping beam):max. 475mm
Adjustability of the bending beam: 200mm motorized height adjustment
Bending angle: 130° adjustable by electric angle input
Kdodpfx Aaocvtbyjtou
upper beam speed:6mm/ sec
Bending beam speed:1,25 rpm ( approx. 90sec for 90° bending)
Backgauge:motorized adjustable from 50-999mm, with digital length display
Machine dimensions: (h x w x d) 3600x 4350 x 4400mm (without pit / with bending beam platform).
dimensions switch cabinet:(h x w x d) 1800 x 1200 x 400mm
drive power bending drive: 30KW
drive power upper beam (clamping beam): 22KW
Power supply:500Volt 50 HZ / control voltage 220Volt
Weight: 24.500 kg
Accessories / special equipment:
- 5 sets of bending toolseach consisting of clamping and bending rail R 8, R 12, R 15,R 20, R40.
- Folding back gauge
- Central lubrication
- machine documentation
Remark:
- Machine comes from a repair shop
- For the machine a pit 900mm deep (foundation) is needed. The substructure of the slewing drive shown on the pictures is only for test run and demonstration purposes.
이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.
귀하의 광고가 성공적으로 삭제되었습니다
오류가 발생했습니다