수평 띠톱

Kaltenbach KBS 750 DG

Kaltenbach KBS750 DG Bandsaw Line with T14 transport system

Kaltenbach KBS 750 double mitre horizontal bandsaw with LS270 NC cross-cut fence and T14 transport system in steel trade version - operation and programming are carried out at the control panel.

This Kaltenbach KBS 750 DG horizontal bandsaw is a very fast and powerful bandsawing machine that is ideally suited for sawing sectional steel such as horizontal double T-beams, L-steel U-steel, flat material and rectangular tubes.
KALTENBACH KBS 750 DG band saw

Semi-automatic two-column bandsaw for sawing profiles with double miter swivel device.

Technical data

Cutting capacity: with 90° saw cut 750 mm × 500 mm

+70°: 730 × 500 mm
-70°: 710 × 500 mm
+60°: 670 × 500 mm
-60°: 650 × 500 mm
+45°: 550 × 500 mm
-45°: 520 × 500 mm
+40°: 500 × 500 mm
+30°: 390 × 500 mm

Technical data:

Min. profile cross-section: 10 × 10 mm
Saw blade dimensions: 6990 × 41 × 1.3 mm, type bimetal M42, Z3/4
Drive power: Saw with frequency control: 5.5 kW
Hydraulic unit (4.9 l/min): 1.5 kW
Cutting speed: 15-100 m/min, continuously adjustable from the control panel
Feed: work feed: 0-300 mm/min
Fast forward and return: 2500 mm/min
Working height: 640 mm
Compressed air connection: 6-8 bar
Air consumption: 500 NL/min (according to DIN 1342)
Saw weight: approx. 3200 kg
Saw dimensions: 3230 × 1160 × 2420 mm
Electrical system: Version according to EN 60204-1
Mains connection: 3 phases + N + PE / 50 Hz
Power consumption: 17 kVA
Fuse protection: 35 A

Machine equipment Kaltenbach KBS 750 DG

Very robust two-column guide for maximum precision.
Inclined saw arm for higher performance and accuracy.
Automatic table lowering during material transport
Infinitely variable speed control via frequency converter.
Hydraulic belt feed, manually adjustable
NC-controlled angle adjustment with absolute value encoder
Automatic cycle: Clamping - sawing - unclamping
Horizontal clamping device:
Fixed front stop, opposite clamping block via cylinder.
Manually adjustable pressure reduction.
Vertical tensioning device:
Directly next to the belt; manually adjustable pressure.
Backlash-free linear guides.
Automatic adjustment of the belt guides
Automatic cutting pressure control
Remote diagnosis possible (telephone line required by customer)
Hydraulic belt tensioning with electronic monitoring
Automatic release at standstill
Guedpfx Asy Rimusqxob
Automatic stop in the event of belt breakage
Micro-spraying system for clean operation and long service life
Integrated chip container
Separately driven chip brush
Electronic slip monitoring
Hydraulic heating