사일로 세미트레일러KEMPF
Schleusenkipper, Rüttler, ca. 58,7 cbm, Lift
사일로 세미트레일러
KEMPF
Schleusenkipper, Rüttler, ca. 58,7 cbm, Lift
고정 가격 부가세 별도
€80,000
제조 연도
2024
상태
중고
위치
Hagenow 

기계 정보
가격 및 위치
고정 가격 부가세 별도
€80,000
- 판매자 위치:
- Bahnhofstraße 42, 19230 Hagenow, 독일

전화하기
기술 세부 사항
- 최대 적재 중량:
- 28,660 kg
- 총중량:
- 36,000 kg
- 차축 구성:
- 3축
- 최초 등록:
- 11/2024
- 다음 검사 (TÜV):
- 11/2026
- 적재 공간 길이:
- 10,500 mm
- 적재 공간 너비:
- 2,430 mm
- 적재 공간 높이:
- 2,300 mm
- 적재 공간 용량:
- 59 m³
- 총 폭:
- 2,550 mm
- 총 높이:
- 4,000 mm
- 장비:
- ABS
제안 세부 정보
- 광고 ID:
- A22154532
- 참조 번호:
- 859
- 업데이트:
- 마지막 업데이트: 20.06.2026
설명
In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to finalization, errors, typos, and prior sale:
Kempf, approx. 58.7 cbm, tipper with slide gate
(Vehicle 859)
First registration: 06.11.2024
Permissible gross vehicle weight: 36,000 kg
Unladen weight: 7,340 kg
Payload: 28,660 kg
Overall length: 11,700 mm
Overall width: 2,550 mm
Overall height: 4,000 mm
Internal length: approx. 10,500 mm
Internal width: approx. 2,430 mm
Internal height: approx. 2,300 mm
Loading volume: approx. 58.7 cbm
Overall height to loading edge when loaded: approx. 3,810 mm
Dksdpjzfdlfjfx Ah Eep
Interior lighting on the front wall
Front wall at a 20-degree angle, made of 5 mm thick aluminum, and straight rear wall, side walls approx. 2.5 mm side wall profiles
Floor: 7 mm thick
Air vibrator, located at the front, covering approx. 1/3 of the loading area, at the rear left, near the lamp holders
Operated via a switch
TÜV (technical inspection): 11/2026, SP (safety inspection): 05/2027
All components attached to the frame are hot-dip galvanized
Roll cover, platform
Combination tailgate with swing gate + portal doors, portal doors 1/3 and 2/3 with viewing window and rubber seal, and grain slide
Approx. 400 x 400 mm
1 dust bag
Partition with 3 sliding partitions, pivoting towards the rear and lockable from the bottom left, 6 locking positions for the partitions
Locking positions at approx. 1/5, 1/4, 3/4, 1/2, and 2/3 of the loading area
Slide gate trough in the rear wall
3 aluminum tension bars for the cover
Hooks for towing rod/cover
High-performance bevel gear slide gate Kempf 400, throughput rate approx. 30-40 m3/h, 4 conveying hoses for the slide gate, approx. 5,000 mm long and 3" TW coupling, 4" cyclone
H2O tank approx. 30 L
2 x LED reversing lights
Fold-up underrun protection
2 x storage box, driver's side, center
1 pair of folding supports
2 x chock
Load pressure gauge
Storage compartments for hoses, left and right, above the axles, along the entire length
1 lift
BPW turntable
Tire pressure monitoring system
Tires: 385/65R22.5, 1) approx. 80/70%, 2) approx. 80/70%, 3) approx. 70/50%
PVC half-shell fenders
2 x LED work lights mounted on the folding supports
Tilting cylinder: Penta 190-250 bar
Lightly used
Price: €80,000.00 (net)
All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to €10,000 is the District Court of Ludwigslust; for disputes exceeding this amount, it is the Regional Court of Schwerin. Subject to errors, typos, and prior sale.
이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.
Kempf, approx. 58.7 cbm, tipper with slide gate
(Vehicle 859)
First registration: 06.11.2024
Permissible gross vehicle weight: 36,000 kg
Unladen weight: 7,340 kg
Payload: 28,660 kg
Overall length: 11,700 mm
Overall width: 2,550 mm
Overall height: 4,000 mm
Internal length: approx. 10,500 mm
Internal width: approx. 2,430 mm
Internal height: approx. 2,300 mm
Loading volume: approx. 58.7 cbm
Overall height to loading edge when loaded: approx. 3,810 mm
Dksdpjzfdlfjfx Ah Eep
Interior lighting on the front wall
Front wall at a 20-degree angle, made of 5 mm thick aluminum, and straight rear wall, side walls approx. 2.5 mm side wall profiles
Floor: 7 mm thick
Air vibrator, located at the front, covering approx. 1/3 of the loading area, at the rear left, near the lamp holders
Operated via a switch
TÜV (technical inspection): 11/2026, SP (safety inspection): 05/2027
All components attached to the frame are hot-dip galvanized
Roll cover, platform
Combination tailgate with swing gate + portal doors, portal doors 1/3 and 2/3 with viewing window and rubber seal, and grain slide
Approx. 400 x 400 mm
1 dust bag
Partition with 3 sliding partitions, pivoting towards the rear and lockable from the bottom left, 6 locking positions for the partitions
Locking positions at approx. 1/5, 1/4, 3/4, 1/2, and 2/3 of the loading area
Slide gate trough in the rear wall
3 aluminum tension bars for the cover
Hooks for towing rod/cover
High-performance bevel gear slide gate Kempf 400, throughput rate approx. 30-40 m3/h, 4 conveying hoses for the slide gate, approx. 5,000 mm long and 3" TW coupling, 4" cyclone
H2O tank approx. 30 L
2 x LED reversing lights
Fold-up underrun protection
2 x storage box, driver's side, center
1 pair of folding supports
2 x chock
Load pressure gauge
Storage compartments for hoses, left and right, above the axles, along the entire length
1 lift
BPW turntable
Tire pressure monitoring system
Tires: 385/65R22.5, 1) approx. 80/70%, 2) approx. 80/70%, 3) approx. 70/50%
PVC half-shell fenders
2 x LED work lights mounted on the folding supports
Tilting cylinder: Penta 190-250 bar
Lightly used
Price: €80,000.00 (net)
All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to €10,000 is the District Court of Ludwigslust; for disputes exceeding this amount, it is the Regional Court of Schwerin. Subject to errors, typos, and prior sale.
이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.
공급자
참고: 무료로 등록하거나 로그인하세요, 모든 정보를 확인할 수 있습니다.
등록일: 2003
55 온라인 광고
문의 보내기
전화기 & 팩스
+49 3883 ... 광고
귀하의 광고가 성공적으로 삭제되었습니다
오류가 발생했습니다


























































































