건조 컨테이너

Lauber TroCo drying container

Dry wood chips, firewood and other coarse, wet biomass in a container that goes straight onto your truck, with warm air blown through the perforated floor.

This Lauber TroCo drying container was built in 03/2026 and has been used only three times by us. It is in very good condition and ready to dry. Only one unit available. This is a single used machine, not ongoing stock. Once sold, it is gone.

Best for: drying coarse, wet biomass such as wood chips, firewood and other coarse plant material, then moving the container to where you need it with a hooklift truck.

Not suitable for: finely ground bulk material unless you verify it with us first. A warm air source and the air hose are not included, you need to supply them.

What the specifications mean in practice:
Rsdpfx Anjz I Dziedech

- 34 m3 volume - one large batch per drying cycle instead of many small ones
- Hooklift system (locking dimension 3,890 mm) - load, move and unload with a standard hooklift truck, no crane needed on site
- Perforated ventilation floor with round air connection at the door end - warm air is pushed up through the whole load, so it dries evenly
- Fitted tarp cover - keeps rain out during storage and transport
- Rear rollers and ladder steps on the front - easier to roll off and to inspect the load
- Gross weight rating 21,000 kg - heavy loads are no problem for the frame

Technical data (from the nameplate):

- Manufacturer: Lauber Trocknungstechnik, type TroCo, serial no. 62401
- Year built: 03/2026
- Volume: 34 m3
- Length: 7,050 mm, height: 2,500 mm
- Empty weight: 3,400 kg, permissible gross weight: 21,000 kg
- Locking dimension: 3,890 mm
- Colour: yellow
- Safety inspection label (DGUV Rule 114-010) from the container builder is fitted, see nameplate photo

Condition: Built 03/2026, used only three times by us, very good condition. Fully functional.

Location: Stanserstrasse 50, 6064 Kerns (self pick-up, transport by arrangement). A hooklift truck, a suitable forklift or a crane is needed for loading. The container weighs approx. 3,400 kg empty.

Why you can buy with confidence:

- Built 03/2026, used only three times
- Used by us, not rented out
- Nameplate photos available, in-person inspection in Kerns OW by appointment

Inspect before you buy: you may verify identity, condition and completeness at inspection or pickup. We guarantee what we control: the machine is what this listing says it is. We do not promise performance in an application we cannot assess, which is why we ask about yours first.

Why buy now: This is a single used unit. Once sold, it is gone. Inspection is available in Kerns OW by appointment.

First-buyer bonus: buy within the next two weeks (until 20 October 2026) and we take CHF 500 off the price. Valid until 20 October 2026, or until the machine is sold.

Action: Send us your intended material, batch size and destination. We will confirm suitability and give you a transport estimate.