로우 로더Müller-Mitteltal
T40
로우 로더
Müller-Mitteltal
T40
EXW 고정 가격 부가세 별도
€14,300
제조 연도
1995
상태
중고
위치
Triptis 

사진은 보여줍니다
지도 표시
기계 정보
가격 및 위치
EXW 고정 가격 부가세 별도
€14,300
- 위치:
- Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland

전화하기
기술 세부 사항
- 공차 중량:
- 8,250 kg
- 최대 적재 중량:
- 31,750 kg
- 총중량:
- 40,000 kg
- 차축 구성:
- 3축
- 최초 등록:
- 05/1995
- 타이어 크기:
- 235/75 r17,5 zwilling
제안 세부 정보
- 광고 ID:
- A8265317
- 참조 번호:
- 20590000
- 업데이트:
- 마지막 업데이트: 06.05.2025
설명
Further information
Hodpfx Aboi Rixgehefb
Main and outer frame made of high-strength double T-profiles, grade ST 52.3, 4-fold longitudinally profiled, with high-strength front and rear ends and crossbars, frame behind the bogie run-through with flat offset offset and rear ramp slope 0.8 m long, lowest floor height due to recessed wheel wells above the rear wheels, front corners of the bogie platform bevelled at 45 degrees. 2 recessed UVV lashing rings each on the bogie platform and the drive-on ramp for attaching tensioning devices Rear end with wide bearings for ramp shaft with 6 bearings. Setiliche protective device with a protective strip according to EC, wheel chocks with clamping safety device
Low-maintenance angular roller bearing axles with automatic slack adjusters, dual-line air brake system in accordance with EC and parking brake
Bogie and drawbar: : Made of double T-profiles in welded construction with ball bearing slewing ring, standard drawbar length 1500 mm, with 8 eyelets 50 mm on average, drawbar support with threaded spindle as height adjustment device, vehicle has no axle compensation!
24 volt, 2 connecting cables 7-pole interchangeable, large rectangular four-chamber lights incl. shunt lights and reversing lights, distribution box at the front, clearance lights at the rear, side marker reflector lights and holder for single-line license plate
Underbody made of 40 mm thick pine wood, pressure-impregnated. Low loading platform and drive-on ramp with crossed top floor 30 mm thick, running lengthwise. Overall floor thickness 70 mm. Bogie platform with longitudinal single floor and recessed, open equipment box, size L 700 x W 800 x D 180 mm
Ramps: in shit construction with trough plate, cross beams, wooden decking running lengthwise, 50 mm thick, ramp tip reinforced, ramp holding rods with turnbuckle and safety catch, ramps can be moved on both sides by 470 mm each, with perforated rail and sliding tube, ramp shaft made of bright steel, articulated arm spring lifter with outer and inner springs for easy one-man operation, with automatic floor supports
steel grit blasted, zinc phosphate primed, single color acrylic paint in RAL colors, wheels silver, traffic, light and metallic colors as well as two-tone paint, wood varnished
이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.
Hodpfx Aboi Rixgehefb
Main and outer frame made of high-strength double T-profiles, grade ST 52.3, 4-fold longitudinally profiled, with high-strength front and rear ends and crossbars, frame behind the bogie run-through with flat offset offset and rear ramp slope 0.8 m long, lowest floor height due to recessed wheel wells above the rear wheels, front corners of the bogie platform bevelled at 45 degrees. 2 recessed UVV lashing rings each on the bogie platform and the drive-on ramp for attaching tensioning devices Rear end with wide bearings for ramp shaft with 6 bearings. Setiliche protective device with a protective strip according to EC, wheel chocks with clamping safety device
Low-maintenance angular roller bearing axles with automatic slack adjusters, dual-line air brake system in accordance with EC and parking brake
Bogie and drawbar: : Made of double T-profiles in welded construction with ball bearing slewing ring, standard drawbar length 1500 mm, with 8 eyelets 50 mm on average, drawbar support with threaded spindle as height adjustment device, vehicle has no axle compensation!
24 volt, 2 connecting cables 7-pole interchangeable, large rectangular four-chamber lights incl. shunt lights and reversing lights, distribution box at the front, clearance lights at the rear, side marker reflector lights and holder for single-line license plate
Underbody made of 40 mm thick pine wood, pressure-impregnated. Low loading platform and drive-on ramp with crossed top floor 30 mm thick, running lengthwise. Overall floor thickness 70 mm. Bogie platform with longitudinal single floor and recessed, open equipment box, size L 700 x W 800 x D 180 mm
Ramps: in shit construction with trough plate, cross beams, wooden decking running lengthwise, 50 mm thick, ramp tip reinforced, ramp holding rods with turnbuckle and safety catch, ramps can be moved on both sides by 470 mm each, with perforated rail and sliding tube, ramp shaft made of bright steel, articulated arm spring lifter with outer and inner springs for easy one-man operation, with automatic floor supports
steel grit blasted, zinc phosphate primed, single color acrylic paint in RAL colors, wheels silver, traffic, light and metallic colors as well as two-tone paint, wood varnished
이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.
공급자
문의 보내기
전화기 & 팩스
+49 36482... 광고
이 광고들도 당신에게 관심이 있을 수 있습니다.
소형 광고
Karlstein am Main
8,738 km
로우로더 트레일러
Müller-MitteltalT 4 RM 40,0 Lenkachse Radmulden Rampen
Müller-MitteltalT 4 RM 40,0 Lenkachse Radmulden Rampen
소형 광고
Agios Athanasios
8,456 km
도로 장벽용 도구
TOOL FOR ROAD BARRIERSLENGHT 6000mm
TOOL FOR ROAD BARRIERSLENGHT 6000mm
소형 광고
Schwebheim
8,679 km
로우로더 트레일러
Müller MitteltalT4 Kompakt 40,0 4 Achs Tieflader- Anhänger
Müller MitteltalT4 Kompakt 40,0 4 Achs Tieflader- Anhänger
소형 광고
Diespeck
8,689 km
로우로더 반트레일러
Müller-MitteltalT4 Profi 40,0 feuerverzinkt
Müller-MitteltalT4 Profi 40,0 feuerverzinkt
소형 광고
Diespeck
8,689 km
로우 로더
Müller-MitteltalT4 kompakt 40,0
Müller-MitteltalT4 kompakt 40,0
귀하의 광고가 성공적으로 삭제되었습니다
오류가 발생했습니다
































































