브리켓 프레스 / 브리켓 프레스

mütek Systemtechnik MPP 110

Production time of the machine approx. 3.5 months

Very robust machine with high pressing force
- is also suitable for producing a saleable briquette quality *depending on the material. The large press cylinder and the 65 mm briquette make this possible.

Our best-selling briquetting press series
+ Tried and tested, simple technology, for extremely low susceptibility to faults
+ 25 years of experience, further development and know-how
+ Several thousand machines in use with satisfied customers
+ Good price-performance ratio

Options:

Surcharge for cooling unit + € 3,995 net, (can also be retrofitted later)
* cools the press tongs (important from 3.5 hours) and the hydraulic oil
* Cooling unit recommended for regular operation of more than 3.5 hours at a time.

Large pre-compressor chamber + € 1,975 net
recommended for light starting materials such as wood shavings

Product code: 84793010
Briquette diameter: 65 mm
Front bush: 65 mm
Briquette stroke max.: 50 mm
Briquette stroke opt.: 50 mm
Output (depending on material): up to 110 kg/h*
approx. 87 kg/h in the last test.
*depending on the bulk density
*based on a bulk weight of 200 kg per cubic meter
.
Kdodpfx Aoffh Atenvsk
Motor power: 5.5 kW
400 Volt / 50 Hz / 3-phase
Length: 1925 mm
Width: 1100 mm
Height: 1500 mm
Weight: 800 kg
Oil volume: 110 liters
Silo diameter: 1000 mm
Silo capacity: approx. 0.7 qbm
Pump: 37 liters
Hydraulic pre-compressor
Cooling press tongs option: yes, with special accessory Coolable press tongs
Cooling of the pressing tongs via water tank (to be procured on site)
Hydraulic oil cooling option: yes
Fill level monitoring option: yes
Briquette option: yes (depending on material)
CE compliant
.
Requirements for the raw material:
- The moisture content (atro) must be between a minimum of 6 and a maximum of 18 %
- Chip length maximum 15 mm
- Installation temperature: tempered room at a minimum of +5°C
- The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear may result

이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.