네오디뮴 오버벨트 자석, 금속 분리기mütek
HAWK-EYE
네오디뮴 오버벨트 자석, 금속 분리기
mütek
HAWK-EYE
고정 가격 부가세 별도
€5,990
제조 연도
2025
상태
신규
위치
Neckartailfingen 

사진은 보여줍니다
지도 표시
기계 정보
가격 및 위치
고정 가격 부가세 별도
€5,990
- 위치:
- Grienweg 38, 72666 Neckartailfingen, Deutschland

전화하기
제안 세부 정보
- 광고 ID:
- A3671440
- 참조 번호:
- Neodym
- 업데이트:
- 마지막 업데이트: 27.05.2025
설명
*Only the neodymium overbelt magnet is offered, not the conveyor belt underneath.
Hsdpfx Adodubpuskonw
*Neodymium magnets are among the strongest magnets in the world. They have an extreme pulling power and cannot be compared to ferrite magnets.
Extremely high degree of separation, depending on the bulk height and the starting material.
Probably the most compact overband magnet on the market.
The competition often uses the less powerful ferrite magnets to save costs.
dimensions approx.
Length: 104cm
Width: 22cm
Height: 28 cm (at the motor)
*Without controller
Surcharge for simple manual start/stop control + 495 €
A high-performance industrial neodymium magnet is installed.
High-performance neodymium magnet approx. 600x68x36.5 mm
* So nails are attracted to a length of 600 mm and thrown off to the side, in the area that is no longer magnetic.
This overbelt magnet should be mounted approx. 5 - 9 cm above the material flow. *Assembly/suspension on site
Ideal for separating nails from wood chips.
Optionally also in a single-shaft shredder that is sucked off
Requirements:
*Your belt width or useful width inside (of the existing conveyor belt) should ideally be narrower than 55 cm
*Suitable for separating nails from material flows that are less than 12 mm high and with a chip length of less than 25 mm.
-----
Optional at extra charge:
Cross and ascending belt demonstrators from € 7,995 net
Hsdpfx Adodubpuskonw
*Neodymium magnets are among the strongest magnets in the world. They have an extreme pulling power and cannot be compared to ferrite magnets.
Extremely high degree of separation, depending on the bulk height and the starting material.
Probably the most compact overband magnet on the market.
The competition often uses the less powerful ferrite magnets to save costs.
dimensions approx.
Length: 104cm
Width: 22cm
Height: 28 cm (at the motor)
*Without controller
Surcharge for simple manual start/stop control + 495 €
A high-performance industrial neodymium magnet is installed.
High-performance neodymium magnet approx. 600x68x36.5 mm
* So nails are attracted to a length of 600 mm and thrown off to the side, in the area that is no longer magnetic.
This overbelt magnet should be mounted approx. 5 - 9 cm above the material flow. *Assembly/suspension on site
Ideal for separating nails from wood chips.
Optionally also in a single-shaft shredder that is sucked off
Requirements:
*Your belt width or useful width inside (of the existing conveyor belt) should ideally be narrower than 55 cm
*Suitable for separating nails from material flows that are less than 12 mm high and with a chip length of less than 25 mm.
-----
Optional at extra charge:
Cross and ascending belt demonstrators from € 7,995 net
이 광고들도 당신에게 관심이 있을 수 있습니다.
소형 광고
Neckartailfingen
8,836 km
파이프 자석, 금속 분리기, 자석
mütek SystemtechnikHawk-Eye
mütek SystemtechnikHawk-Eye
소형 광고
Bitburg
8,872 km
연탄 프레스
WEIMAC 140 - sofort verfügbar - Vorführgerät
WEIMAC 140 - sofort verfügbar - Vorführgerät
소형 광고
Neckartailfingen
8,836 km
오버밴드 자석 블록 자석 마그네틱 디스크
mütekHawk-Eye
mütekHawk-Eye
소형 광고
Komenda
8,720 km
4면 몰더
ReignmacRMM 523
ReignmacRMM 523
소형 광고
MG Nieuwegein
8,778 km
Papro 리프팅 테이블
PaproHeftafels
PaproHeftafels
소형 광고
Neckartailfingen
8,836 km
과립기, 플라스틱용 과립기
mütekMVZ 7,5 kW
mütekMVZ 7,5 kW
소형 광고
독일
13,329 km
슈레더 - 칩 분쇄기
MayfranP14 00W7008.01
MayfranP14 00W7008.01
소형 광고
Kurtuluş
8,166 km
맞대기 용접기
Kahramansan TeknolojiKMB5
Kahramansan TeknolojiKMB5
소형 광고
Frankfurt am Main
8,748 km
트윈 샤프트 슈레더
MercodorZM 44
MercodorZM 44
소형 광고
Sinsheim
8,807 km
절단 밀링 /과 립 기
NEUE HERBOLDLM 600/1000-S5-2
NEUE HERBOLDLM 600/1000-S5-2
귀하의 광고가 성공적으로 삭제되었습니다
오류가 발생했습니다



































































