라벨 인쇄 및 디스펜싱 시스템
4050S
라벨 인쇄 및 디스펜싱 시스템
4050S
VB 부가세 별도
€6,650
상태
중고
위치
Borken 

사진은 보여줍니다
지도 표시
기계 정보
가격 및 위치
VB 부가세 별도
€6,650
- 위치:
- Dunkerstrasse 29, 46325 Borken/Burlo, DE
전화하기
제안 세부 정보
- 광고 ID:
- A7379912
- 참조 번호:
- 25075
- 업데이트:
- 마지막 업데이트: 11.04.2025
설명
Bluhm Weber Legi-Air- 4050S Labeling Machine
4.14.1 Basic construction
The machine is designed as a closed aluminum profile frame and is very compact.
The control cabinets are integrated in the lower part of the frame.
The main valve terminal is located behind a service door below the control panel.
The system includes four workstation stops.
Operation is via a touch screen.
The control panel is mounted on the right side of the rack.
A labeling system from Bluhm Weber is used in the station; the documentation from Bluhm applies here accordingly.
4.14.2 Functional sequence
- The incoming workpiece carriers with IO modules are stopped, lifted out (positioned) and contacted in sub-stations 10.1 or 10.2.
In these two stations
- Automatic labeling of the IO modules takes place in substation 10.3. The labels and their contents are generated automatically, as is their application to the devices.
- After labeling, the module is finalized in station 10.4, where it is stopped, lifted out and contacted. After finalization, the workpiece carrier is automatically ejected from the station.
Bluhm Weber Legi-Air- 4050S
Lodpfx Aaeibh Tkjtshn
4.14.1 Basic construction
The machine is designed as a closed aluminum profile frame and is very compact.
The control cabinets are integrated in the lower part of the frame.
The main valve terminal is located behind a service door below the control panel.
The system includes four workstation stops.
Operation is via a touch screen.
The control panel is mounted on the right side of the rack.
A labeling system from Bluhm Weber is used in the station; the documentation from Bluhm applies here accordingly.
4.14.2 Functional sequence
- The incoming workpiece carriers with IO modules are stopped, lifted out (positioned) and contacted in sub-stations 10.1 or 10.2.
In these two stations
- Automatic labeling of the IO modules takes place in substation 10.3. The labels and their contents are generated automatically, as is their application to the devices.
- After labeling, the module is finalized in station 10.4, where it is stopped, lifted out and contacted. After finalization, the workpiece carrier is automatically ejected from the station.
Bluhm Weber Legi-Air- 4050S
Lodpfx Aaeibh Tkjtshn
귀하의 광고가 성공적으로 삭제되었습니다
오류가 발생했습니다