사일로 세미트레일러

OMEPS

O.ME.P.S Tipping Silo Semi-Trailer – Type: CR 47

Chassis:
Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" king pin, tipping cylinder: Hyva

Axles and Suspension:
Disc brakes 22.5" SAF axle units, 3x 9t with air suspension, axle spacing is 2 x 1310 mm, raise/lower valve, loading pressure gauge mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn

Rims and Tyres:
6 wheels fitted with 385/65 R22.5 tyres, as per manufacturer’s choice on Alcoa Dura Bright aluminium rims, 11.75x22.5 ET 120

Brake System:
WABCO EBS 4S/2M compressed air brake system with RSS, according to standard 98/12/CE - ECE R13/09, brake pad wear indicator connected

Landing Legs:
Mechanical landing legs, two speeds, 2x 20t support load with swiveling foot, rear without support

Electrical System:
All lights in LED version, 24 volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis, yellow side marker lights in the required number, rear position lights, front outline marker lights, rear license plate lights, lighting in compliance with standard 97/28/CE-2007/35/CE, 2 multi-chamber lights mounted at pivot height on aluminum brackets in compliance with standard 97/28/CE-2007/35/CE, 1 LED work spotlight mounted on the tank, yellow warning beacon at the rear at hose tube height, 2x reversing lights on underrun protection, 2x reversing lights at the height of the supports (each switchable on the energy console)

Tank Design:
A horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn), single-chamber tank, with 47,000 liters capacity, tank warranty: 24 months from delivery, operating parameters: pressure vessel according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating overpressure 2.0 bar, operating temperature -40° to +80° C

Filling Options:
4 manholes DN 450 with swing and folding domed covers. The dome covers are closed pressure-tight with 4 wing nuts each, rubber supports for the domed covers at the top for storage, rain guard at the front closed - rear open

Material Discharge:
1 discharge cone DN 800 made of stainless steel (INOX), foldable with INOX disc for loosening, discharge cone swivel-mounted laterally, shut-off valve DN 150 with white seal, connection: STORZ-A

Lodpfxsx Nufms Ad Hjta
Air Piping:
One 2.5" stainless steel air manifold pipe mounted on the right-hand control side, one 4" stainless steel air distribution pipe mounted at the rear of the tank, air valves (shut-off valves) in stainless steel, top air hose and air connection hoses with 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1m in front of the pivot bearing

Ladder and Access Walkway:
1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety folding guardrail deployable from below with a separate ladder part, equipped with parking brake when opened, 1 aluminum safety walkway running along the left on top of the tank, non-slip coating on the tank

Discharge Hose Storage:
4 hose tube containers 5m in length, DN 200 made of aluminium with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76

Accessories: The side underrun protection...

이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.