반자동 알루미늄 원형톱

Plantec UK 650 HA

Aluminum circular saw UK 650 HA, semi-automatic
The UK 650 HA semi-automatic circular saw is an "upcut" machine and is used predominantly
Used to cut profile materials made of cast aluminum, copper and hard plastics (limited
solid material). The machine is characterized by easy handling and fast
easy changing of the material as well as easy adjustment of the miter angle. The UK 650
HA has an infinitely adjustable miter range left and right up to 20° (pivoting range
twice 70°). The saw feed takes place independently at the push of a button, the material is clamped
takes place via two pneumatically controlled vertical and horizontal clamping cylinders. By default
this machine includes a minimum lubrication system and an air spray gun for cleaning
the machine! Connections for a chip extraction system are available on this machine. Of
Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser
and pneumatics to lift the protective hood!

equipment
Double miter 20° - 90° - 20°, large support plate,
powerful drive motor
Two-button control for triggering the saw cut
(optionally also available as a one-button control)
Clear control panel
Sheet or cutting feed adjustable
Two vertical and two horizontal pneumatic clamping cylinders
Hydropneumatic lifting of the saw blade, with oil level indicator
Fixed material feed jaw can be used to enlarge the
cutting performance can be shifted backwards
large protective hood, covers the entire work area
Minimum lubrication system with 2 liter reservoir
Redoidun Depfx Abuer
Air gun to clean the machine
Saw blade ø 650 mm

workflow
1. Setting the cutting angle 2. Inserting the material 3. Adjusting the lifting speed
4. Bring the clamping cylinder up to 20 mm on the material 5. Clamp the material 6. By pressing the
Start button, the machine is ready for use. 7. Press and hold the two SAWS keys, das
Material is sawn. 8. When the cycle is complete, release both SAW buttons and the
Press the STOP button 9. Open the vice and remove or push the material further
It is always possible for you to inspect the desired system in our production/demonstration hall.
Please do not hesitate to contact us.