MAZAK INTEGREX 200 III S

Mazak INTEGREX 200 III S

This 5-axis Mazak INTEGREX 200 III S was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum workpiece weight of 150 kg. The machine is equipped with a tool magazine capacity of 80 slots and a rapid traverse speed of 38 m/min on the X and Z axes. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX 200 III S turn-mill centre we have for sale. Contact us for further details.

- Max. Swing Diameter: 660 mm- Max. Turning Diameter: 660 mm- Max. Turning Diameter over Slide: 500 - 660 mm- Max. Bar Working Diameter: 51 mm- Max. Workpiece Weight (incl. Chuck) - Chuck Workpiece: 100 kg- Max. Workpiece Weight (incl. Chuck) - Shaft Workpiece: 150 kg- Main Spindle Speed Range (Stepless): 35 - 5,000 rpm- Main Spindle Drive Power (30 min. rating / 100% continuous operation): 22 kW / 15 kW- Main Spindle Max. Torque: 349 Nm- Main Spindle Nose: A2-6"- Main Spindle Bore: Diameter 76 mm- Main Spindle Chuck Diameter: 210 mm- Main Spindle Indexing (C-Axis): 0.0001°- Second Spindle Drive Power (30 min. rating / 100% continuous operation): 18.5 kW / 15 kW- Second Spindle Speed Range: 35 - 5,000 rpm- Second Spindle Max. Torque: 326 Nm- Second Spindle Indexing (C-Axis): 0.0001°- Second Spindle Chuck Diameter: 210 mm- Tool Turret Design: Single spindle turret for stationary or driven tools- Driven Tools (IPM Motor) Drive Power (20% ED): 15 kW- Driven Tools Max. Torque: 120 Nm- Driven Tools Speed Range: 15 - 12,000 rpm- Tool Taper: MAZAK KM 63 quick-change system (for stationary tools)- Tool Magazine Type: Drum type- Tool Magazine Capacity: 80 slots (equipped for stationary and driven tools)- Tool Weight: max. 10 kg- Tool Diameter: max. 90 mm- Tool Diameter (with free adjacent slots): max. 125 mm- Tool Length: max. 300 mm- Tool Change Time (Tool-to-Tool step 1): approx. 1.3 s- Travel Y-Axis: +/- 80 mm- Travel W-Axis: 1050 mm- B-Axis Swivel Range: -30° to +195°- Rapid Traverse Speed X-Axis: 38 m/min- Rapid Traverse Speed Y-Axis: 26 m/min- Rapid Traverse Speed Z-Axis: 38 m/min- Rapid Traverse Speed W-Axis: 30 m/min- Rapid Traverse Speed C-Axis: 400 rpm- Feed Range X-Axis: 0 - 8,000 mm/min- Feed Range Z-Axis: 0 - 8,000 mm/min- Feed Range Y-Axis: 0 - 8,000 mm/min- Coolant Tank Capacity: 220 L- Pump Delivery Rate: approx. 20 l/min- Pump Pressure: approx. 5 bar- Pump Power: 635 W- Connected Load: 61.4 kVA- Operating Voltage: 400 V / 50 Hz- Pneumatic Pressure: 5 bar, 500 l/min- Total Operating Hours: 3,520 hours (Recorded on 2026/05/04)- Automatic Process Time: 1,581 hours- Automatic Cutting Time: 1,267 hours- Pure Cutting Time: 905 hours- Operating Time: 615 hours- Standard Accessories / Additional Equipment:- B-Axis (0.0001° positioning axis)- C-Axis (0.0001°)- Y-Axis- Spindle orientation on second spindle- Synchronization of main and second spindle- Hydraulic 3-jaw chuck diameter 210 mm, Type KITAGAWA B-208, including 1 set of soft jaws (Main Spindle)- Hydraulic 3-jaw chuck diameter 210 mm, Type KITAGAWA B-208, including 1 set of soft jaws (2nd Spindle)- Dual foot switch for opening/closing the chucks for main and 2nd spindle- Feedback of chuck status (open/closed) for main and 2nd spindle- Air blow-out device on chuck (Second Spindle)- Tool Setter (Tool Eye)- Front door interlock- Complete coolant system- Coolant and chip guard via fully enclosed work area- Work area lighting- Chip Conveyor System (Mayfran ConSep unit visible)

Technical Specification
Counter Spindle Yes
Hnjdozr U Aujpfx Anwjr