밴드쏘MEBA
260 DG HS
밴드쏘
MEBA
260 DG HS
제조 연도
2014
상태
중고
위치
Dinkelsbühl 

사진은 보여줍니다
지도 표시
가격 및 위치
- 위치:
- Heininger Straße 37, 91550 Dinkelsbühl, DE
전화하기
제안 세부 정보
- 광고 ID:
- A18744811
- 업데이트:
- 마지막 업데이트: 16.04.2025
설명
Available from stock!
Semi-automatic band saw with miter adjustment on both sides
• Fast miter adjustment from 90° to 30°, continuously adjustable to 0.5° accuracy according to the scale. The miter pivot point is the intersection point between the saw blade and the material feed system, thus ensuring no change in the length.
• End stops at 30° + 45° left
• Quick material clamping: The material is clamped parallel at 90° at any angle of the saw frame.
• Machine stand with chip collection tray
Iodpsv Rbtnefx Aatoih
• Saw blade drive with limit switch and automatic frame lifting to the top of the material.
• Precise carbide-tipped saw blade roller guide.
• Miter range continuously adjustable from 30° to 150°.
• Coolant system supplied as standard (including electric preparation for minimum quantity spray system).
Additional equipment DG-HS:
Hydraulic raising/lowering of the saw frame.
Semi-automatic sawing process.
Hydraulic material clamping/short-stroke cylinder.
Rapid traverse lowering to the top of the material.
Cutting range:
30° left Ø 130 or 120x120
45° left Ø 200 or 180x180
90° Ø 260 or 300x260
45° right Ø 200 or 180x180
30° right Ø 130 or 120x120
Remnant length 25mm
Smallest diameter 5mm
Motor 1.0 / 1.5 kW
Saw blade 3350x27x0.9mm
Cutting speed 28/56 m/min
이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.
Semi-automatic band saw with miter adjustment on both sides
• Fast miter adjustment from 90° to 30°, continuously adjustable to 0.5° accuracy according to the scale. The miter pivot point is the intersection point between the saw blade and the material feed system, thus ensuring no change in the length.
• End stops at 30° + 45° left
• Quick material clamping: The material is clamped parallel at 90° at any angle of the saw frame.
• Machine stand with chip collection tray
Iodpsv Rbtnefx Aatoih
• Saw blade drive with limit switch and automatic frame lifting to the top of the material.
• Precise carbide-tipped saw blade roller guide.
• Miter range continuously adjustable from 30° to 150°.
• Coolant system supplied as standard (including electric preparation for minimum quantity spray system).
Additional equipment DG-HS:
Hydraulic raising/lowering of the saw frame.
Semi-automatic sawing process.
Hydraulic material clamping/short-stroke cylinder.
Rapid traverse lowering to the top of the material.
Cutting range:
30° left Ø 130 or 120x120
45° left Ø 200 or 180x180
90° Ø 260 or 300x260
45° right Ø 200 or 180x180
30° right Ø 130 or 120x120
Remnant length 25mm
Smallest diameter 5mm
Motor 1.0 / 1.5 kW
Saw blade 3350x27x0.9mm
Cutting speed 28/56 m/min
이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.
귀하의 광고가 성공적으로 삭제되었습니다
오류가 발생했습니다