파쇄 공장

muetek MRZ 630 - 18,5 kW

Demonstration machine with approximately 10 operating hours
Another machine available immediately (ex works in Neckartailfingen)

Csdob Ny Eyjpfx Afleaa
*Options available for an additional charge - see below

Included:
+ Profile rotor for higher throughput

We would be happy to conduct a free test with your material. I invite you to visit us in Neckartailfingen. You can also send us your material via freight forwarding, and we will document the test with photos and videos.

Motor: 18.5 kW; 400 V - 50 Hz - 3 ph
Blades: 15, multi-rotatable,
Double row of blades available for an additional €995 net

Rotor diameter: 260 mm
Control system: Siemens S7-1200 PLC
Cutter opening: 630 x 820 mm
Funnel volume: approx. 0.6 m³
Hydraulic slide gate
Screen perforation of your choice (10 - 40 mm)
Suction nozzle diameter: 160 mm
Weight: approx. 1,300 kg
Dimensions (l x w x h): approx. 1,737 x 1,167 x 1,650 mm
Moisture content: < 30% dry matter
.
Included as standard:
- V-rotor for maximum throughput
- Control cabinet with Siemens PLC
- Automatic star/delta start-up
- Fast hydraulics
- Automatic OFF when the rotor is idle
- Speed 70-90 rpm for high throughput
- Cyclic control to avoid idle times
- Performance-enhancing step control of the hydraulic slide
- Pertinax guides for the hydraulic slide
- Vibration-damping machine feet
- CE compliant
.
Shredder options available for an additional charge:

- Raise the shredder by 30 cm (prepared for conveyor belt) + €2,080 net

- Eco-Rings: + €1,980 net
(recommended for more than 20% hardwood)

- Double row of blades + €995 net

- Special scraper + €990 net
(recommended for shredding veneer or paper, or items with a material thickness of less than 3 mm)

- Bent conveyor belt + €8,770 net
Angle: adjustable from 0-60 degrees
Discharge height: approx. 2,000 mm

- Automatic overhead magnet + €5,980 net

Alternatively, a fixed magnetic block above the conveyor belt for regular manual scraping + €990 net (for low-volume shredding) Metal parts)

- Conveyor belt and overhead magnet control + €2,750 net
(Start and stop synchronized with the chipper) or manual start and stop of the belts + €595 net
.

Raw material requirements:
- Moisture content (absolute dry matter) must be below 30%
- Installation temperature: temperature-controlled room at least +5°C
- Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.