몰드형 방전가공기 (EDM)
OPS Ingersoll GANTRY EAGLE 500 Generalüberholt

제조 연도

2009

상태

중고

위치

Burbach

몰드형 방전가공기 (EDM) OPS Ingersoll GANTRY EAGLE 500 Generalüberholt

OPS Ingersoll GANTRY EAGLE 500 Generalüberholt

지도 표시

기계 정보

기계 명칭:: 몰드형 방전가공기 (EDM)

제조업체:: OPS Ingersoll

모델:: GANTRY EAGLE 500 Generalüberholt

제조 연도:: 2009

상태:: 전면적으로 오버홀된 (중고)

기능성:: 완전히 작동합니다

가격 및 위치

위치:: 57299 Burbach, Deutschland

전화하기

기술 세부 사항

X축 이동 거리:: 525 mm

Y축 이동 거리:: 400 mm

Z축 이동 거리:: 450 mm

가공물 중량(최대):: 1,000 kg

가공물 높이 (최대):: 375 mm

제안 세부 정보

광고 ID:: A21223387

업데이트:: 마지막 업데이트: 12.02.2026

설명

Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – Excellent Technical and Visual Condition

The machine has undergone a comprehensive, professional refurbishment in our facility and is in outstanding technical and cosmetic condition.

During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts, including ball guides and drive spindles, were thoroughly inspected and replaced where necessary. This was followed by a complete geometric measurement, alignment, and additional verification using a laser measuring system.

The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. Every hose, including hydraulic and pneumatic lines, was completely replaced.
Fpedpoyiz T Njfx Aa Sec

Furthermore, the machine has been fully repainted and visually presents itself in an impeccably maintained state.

The generator and control system were cleaned and technically tested. The generator’s cooling unit was also cleaned to ensure reliable cooling and consistent operation.

Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and testing standards.

The machine is immediately available and is ideally suited for reliable production use.

Technical Data:
Manufacturer: Ingersoll (OPS Ingersoll)
Die-Sinking EDM Machine
Model: OPS INGERSOLL GANTRY EAGLE 500
Year of manufacture: 2009
Control system: EAGLE Powertec PC/NC 2060
MultiProg Powertec technology programming on PC/NC
Powertec Easy Burn – quick programming
Powertec Handheld – multifunctional manual control device
Manual eroding via Powertec Handheld
High-Speed Jump: max. 18 m/min
Generator output: 60 Ampere, EAGLE Powertec
Travel paths (X, Y, Z): 525 x 400 x 450 mm
Electrode changer: 20-position pick-up carousel
Work tank (W x D x H): 770 x 670 x 440 mm
Worktable (W x D): 750 x 650 mm
Load capacity: 1,000 kg

Accessories:
CO2 fire extinguishing system
Integrated cartridge filter system

Special features:
Linear measuring system on all axes (Z axis standard in series)

이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.