Powerplant AS200 IS2 발전기 세트 - 스테이지 5Powerplant (Stamford)
AS200.IS2
Powerplant AS200 IS2 발전기 세트 - 스테이지 5
Powerplant (Stamford)
AS200.IS2
VB 부가세 별도
€46,000
제조 연도
2015
상태
중고
(완전히 작동합니다)
위치
Swindon 

기계 정보
가격 및 위치
VB 부가세 별도
€46,000
- 위치:
- Swindon, 영국

전화하기
기술 세부 사항
- 총중량:
- 4,824 kg
- 연료 종류:
- 디젤
- 탱크 용량:
- 1,000 l
- 동력:
- 160 킬로와트 (217.54 마력)
- 출력 전류:
- 288 A
- 출력 전압:
- 400 V
- 출력 주파수:
- 50 헤르츠
- 출력 전류 유형:
- 삼상
- 정격 (피상) 전력:
- 200 kVA
- 최대 회전 속도:
- 1,500 rpm
- 모터 제조업체:
- Stamford
제안 세부 정보
- 광고 ID:
- A21913378
- 업데이트:
- 마지막 업데이트: 12.05.2026
설명
For sale is a Powerplant AS200 IS2 diesel genset with 200 kVA prime power, manufactured in 2015, powered by an Iveco CURSOR87TE1F.S550 engine with Stamford alternator. Total operating hours: 6727h.
A key feature of this unit is the HJS Emission Technology Stage IIIA to Stage V emission upgrade carried out by HJS Emission Technology UK in Swindon. The genset was equipped with a modern exhaust aftertreatment system designed to significantly reduce emissions and allow operation in emission-sensitive environments and projects.
The genset is already registered with CVRAS/EST. In accordance with CVRAS/EST requirements, a telematics unit has been installed to monitor NOx performance. The first year of telematics service is included. After 12 months, an annual service fee applies. The telematics connection allows remote monitoring via the HJS online portal, including AdBlue refill status, system condition and NOx performance data, helping operators maintain compliance and monitor the system efficiently.
The retrofit system combines proven exhaust aftertreatment technologies including:
Diesel Oxidation Catalyst (DOC)
Diesel Particulate Filter (DPF)
SCR system with AdBlue injection
The DPF reduces particulate emissions, while the SCR system lowers NOx emissions.
The installed 80-litre AdBlue tank provides approximately 30 operating hours at full load without refilling, depending on load profile and operating conditions.
This retrofit solution enables existing generators to meet modern Stage V emission requirements without the immediate need to purchase a new machine.
Installed HJS components:
10.5” DOC
10.5” DPF
13.0” SCR
80-litre AdBlue tank
Control unit
Telematic unit
AdBlue pump
Fuse box
Display
Iaedpfx Ahjy R D Hcelet
The original silencer was removed during conversion. Operating time after the upgrade is only approx. 10 hours.
This genset is ideal for construction, industrial, rental and infrastructure projects where low emissions and NOx monitoring are required. It is also suitable for use within London Low Emission Zones and other projects with strict emission regulations.
Technical Specifications:
Generator make: Powerplant
Model: AS200 IS2
Prime power: 200 kVA
Engine: Iveco CURSOR87TE1F.S550
Engine power: 160 kW
RPM: 1500
Alternator: Stamford UCI274H1
Control panel: Deep Sea Electronics DSE7410
Housing: Canopied
Year: 2015
Dry weight: 3762 kg
Wet weight: 4824 kg
Voltage AC: 400V / 230V
Voltage DC: 24V
Frequency: 50 Hz
Serial number: 4184/01
Note: Sold as a used industrial machine. Inspection and technical verification prior to purchase are recommended. All information is provided to the best of our knowledge based on available technical data.
If you have any questions or require further information, please contact us.
A key feature of this unit is the HJS Emission Technology Stage IIIA to Stage V emission upgrade carried out by HJS Emission Technology UK in Swindon. The genset was equipped with a modern exhaust aftertreatment system designed to significantly reduce emissions and allow operation in emission-sensitive environments and projects.
The genset is already registered with CVRAS/EST. In accordance with CVRAS/EST requirements, a telematics unit has been installed to monitor NOx performance. The first year of telematics service is included. After 12 months, an annual service fee applies. The telematics connection allows remote monitoring via the HJS online portal, including AdBlue refill status, system condition and NOx performance data, helping operators maintain compliance and monitor the system efficiently.
The retrofit system combines proven exhaust aftertreatment technologies including:
Diesel Oxidation Catalyst (DOC)
Diesel Particulate Filter (DPF)
SCR system with AdBlue injection
The DPF reduces particulate emissions, while the SCR system lowers NOx emissions.
The installed 80-litre AdBlue tank provides approximately 30 operating hours at full load without refilling, depending on load profile and operating conditions.
This retrofit solution enables existing generators to meet modern Stage V emission requirements without the immediate need to purchase a new machine.
Installed HJS components:
10.5” DOC
10.5” DPF
13.0” SCR
80-litre AdBlue tank
Control unit
Telematic unit
AdBlue pump
Fuse box
Display
Iaedpfx Ahjy R D Hcelet
The original silencer was removed during conversion. Operating time after the upgrade is only approx. 10 hours.
This genset is ideal for construction, industrial, rental and infrastructure projects where low emissions and NOx monitoring are required. It is also suitable for use within London Low Emission Zones and other projects with strict emission regulations.
Technical Specifications:
Generator make: Powerplant
Model: AS200 IS2
Prime power: 200 kVA
Engine: Iveco CURSOR87TE1F.S550
Engine power: 160 kW
RPM: 1500
Alternator: Stamford UCI274H1
Control panel: Deep Sea Electronics DSE7410
Housing: Canopied
Year: 2015
Dry weight: 3762 kg
Wet weight: 4824 kg
Voltage AC: 400V / 230V
Voltage DC: 24V
Frequency: 50 Hz
Serial number: 4184/01
Note: Sold as a used industrial machine. Inspection and technical verification prior to purchase are recommended. All information is provided to the best of our knowledge based on available technical data.
If you have any questions or require further information, please contact us.
공급자
참고: 무료로 등록하거나 로그인하세요, 모든 정보를 확인할 수 있습니다.
최종 온라인: 지난주
등록일: 2026
1 온라인 광고
문의 보내기
전화기 & 팩스
+44 1344 ... 광고
귀하의 광고가 성공적으로 삭제되었습니다
오류가 발생했습니다

























