경금속 및 알루미늄용 원형 톱
Pressta Eisele PROFILMA 502

제조 연도

2023

상태

중고 (완전히 작동합니다)

위치

Hagen

경금속 및 알루미늄용 원형 톱 Pressta Eisele PROFILMA 502

기계 정보

기계 명칭:: 경금속 및 알루미늄용 원형 톱

제조업체:: Pressta Eisele

모델:: PROFILMA 502

기계 번호:: 1559

제조 연도:: 2023

상태:: 거의 새것 (중고)

기능성:: 완전히 작동합니다

작동 시간:: 1,809 h

가격 및 위치

위치:: Hagen, 독일

전화하기

기술 세부 사항

톱날 지름:: 550 mm

이송 길이 X축:: 800 mm

총 길이:: 2,400 mm

총 폭:: 2,000 mm

총 높이:: 1,800 mm

90°에서 원형 강절단 범위:: 190 mm

입력 전류 유형:: 삼상

최대 회전 속도:: 2,850 rpm

최대 절단 높이:: 150 mm

총중량:: 1,650 kg

섹션 길이(최소):: 3 mm

섹션 길이(최대):: 4,000 mm

톱날 속도:: 2,850 rpm

입력 전압:: 400 V

톱 구동:: 7,500 와트

절단 직경:: 270 mm

톱날 구멍:: 40 mm

제안 세부 정보

광고 ID:: A21740938

업데이트:: 마지막 업데이트: 20.05.2026

설명

Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3

ST Circular Saw Fully Automatic PROFILMA 502
Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. Suitable for saw blades Ø 550 mm, cutting capacity 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm. Equipped with Siemens S7 controller with touch display incl. piece counter. Includes CPU 315 and Flexisoft, batch multiplier for bundle material processing. Cycle time indication in seconds, chain dimensions, includes reversing device for cut lengths up to 4 m max. Automatic shut-off via limit switch at end of material, fault diagnostics, including IXON router for VPN connection (see datasheet). Motorized saw blade feed, steplessly adjustable, vertical and horizontal clamping from bottom to top (both on feed and discharge side of saw head). Cutting gap extension on both sides of the saw blade. Electronic material feed unit with 800 mm feed length, utilizing ball screw and servomotor, including pneumatic horizontal and vertical clamping system. The profile support area in the feed zone is equipped with a lift/lower roller. Remnant cut from 75 mm, profile-dependent. Clamping pressure reduction horizontally and vertically with 6 pressure regulators. Intermittent spray device with level monitoring and automatic shut-off, 1-liter lubricant reservoir. Noise protection package—frame interior lined with soundproofing mats. Two extraction nozzles Ø 100 mm. Safety guard over both the saw head and the feed unit. 740 mm roller conveyor with intrusion guard on the infeed side, 450 mm pertinax tabletop with intrusion guard on the outfeed side.
Klsdpfx Anoy Dtpmjdeu

MG 3 Chip Extraction
Dust and chips are collected in a 172-litre metal container, which is removable for easy emptying. Two outlets with 100 mm hose adapters (no extraction hose included). 3.0 kW drive, 400 V, 50 Hz, three-phase motor. Max. air flow rate 2,600 m³/h, vacuum 30 mbar, with fan snail housing above the extractor. Large filter surface, pneumatic shaker unit for filter cleaning, filter class M. Max. noise level 80 dB(A). Selector switch for continuous operation or saw-controlled operation (no power cable). Painted: RAL 7035 / 9016.

이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.