수직 머시닝 센터PRIMINER
VF 1300
기술 세부 사항
- X축 이동 거리:
- 1,300 mm
- Y축 이동 거리:
- 650 mm
- Z축 이동 거리:
- 600 mm
- 컨트롤러 모델:
- Heidenhain TNC-460
- 스핀들 속도 (최대):
- 15,000 rpm
제공
- 위치:
- Bayern, 독일
– 거리: 약 8,587 km
- 가용성:
- 경매 종료 직후 바로
- 인도 조건:
- EXW
무료
설명
Machine with only 187 spindle hours!
The new price of the machine was approximately €140,000 in 2023!
No tools or a vise are included. However, these can be acquired upon request.
TECHNICAL DETAILS
Travel X-axis: 1,300 mm
Travel Y-axis: 650 mm
Travel Z-axis: 600 mm
Spindle speed: 15,000 rpm
Main spindle servo motor Siemens: 20/53 kW
Main spindle servo motor Fanuc: 15/30 kW
Spindle taper: SK 40
Work table
Table dimensions: 1,500 × 650 mm
Table load: max. 1,200 kg
T-slots: 18 × 5 × 100 mm
Distance spindle to table surface: 150–750 mm
Distance spindle center to Z-axis cover: 697 mm
Rapid traverse X/Y-axis: 36 m/min
Rapid traverse Z-axis: 36 m/min
Working feed rate: max. 1–12,000 mm/min
Feed motors X/Y/Z: 3.2/3.2/4.3 kW
Torque of feed motors X/Y/Z: 20/20/27 Nm
Tool positions: 28
Tool length: max. 300 mm
Tool diameter: max. 75 mm
Tool diameter with free adjacent positions: max. 125 mm
Tool weight: max. 8 kg
Tool change time: 1.6 s
MACHINE DETAILS
Control system: Heidenhain TNC-460
Accuracy without linear glass scales
Positioning accuracy over the entire travel range: 0.012 mm
Repeatability accuracy over the entire travel range: 0.008 mm
Accuracy with linear glass scales
Positioning accuracy over the entire travel range: 0.008 mm
Repeatability accuracy over the entire travel range: 0.006 mm
Cooling and power supply
Coolant tank volume: 250 l
Coolant flow rate: 40 l/min
Mains voltage: 400 V ± 10 %
Number of phases: 3
Mains frequency: 50 Hz
Connected load: 85 kVA
Dimensions and weight
Dimensions (L × W × H): 4,025 × 3,090 × 3,185 mm
Weight: 8,000 kg
Operating hours
Spindle hours: 187 h
Machine operating hours: 773 h
Control operating hours: 1,165 h
EQUIPMENT
Direct drive
Double-arm tool changer
O-BLUM tool measuring system Lasercontrol NT
O-BLUM workpiece measuring system TC50
Electronic handwheel (MPG)
Tapping without draw-in collet
USB interface
CF card interface
Ethernet interface
HIWIN linear guides with roller guides in all axes
HIWIN ball screw drives
Directly driven main spindle
NSK/FAG main spindle bearings
Separate oil-air spindle cooling unit
Fully enclosed tool changer for protection against chips
Pneumatic intermediate tank for the tool changer as a backup in case of pressure drop
Fully enclosed splash guard
Separate air conditioning system for heat dissipation
이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.
결제 처리
- 구입 부대 비용:
- 18 %
- 지불 조건:
- 100% 선불 결제
- 결제 방식:
은행 송금
제안 세부 정보
- 광고 ID:
- A22322102
- 참조 번호:
- AUC-2607110
- 업데이트:
- 마지막 업데이트: 13.07.2026
- 독점 제공:
- 경매에서만 구매 가능
견학
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-신뢰의 인증 마크
신뢰 마크란 무엇입니까?
Machineseeker는 선정된 딜러에게 Machineseeker 신뢰 인증마크를 부여합니다. 발급 전에 숙련된 Machineseeker 직원에 의해 표준화되고 철저한 검사가 수행됩니다.
우리는 무엇을 점검합니까?
영업 허가증 또는 상업 등기부 등본의 확인
판매자의
우편 주소 확인
은행 연결의 검증
대표 번호의
전화
접근 가능성 확인
경제 정보
에는 부정적인 특성이 포함되어서는 안 됩니다
구매자 불만
은(는) 인증 마크 박탈로 이어질 수 있습니다이것이 구매자로서 귀하에게 어떤 의미가 있습니까?
Machineseeker 신뢰 씰을 통해 구매자는 직접 검증하지 않고도 매우 높은 확률로 정직하고 성실하게 거래하는 신뢰할 수 있는 판매자를 식별할 수 있습니다.
물론 구매 과정에서 의견 차이가 발생할 수 있습니다. Machineseeker는 Machineseeker에서 활동 중인 구매자 또는 판매자에 의한 법률 위반에 대해 책임을 지지 않습니다.