시스템 뒤집기Rapha Systems
RDW 260
시스템 뒤집기
Rapha Systems
RDW 260
제조 연도
2023
상태
신규
위치
Wang 

사진은 보여줍니다
지도 표시
기계 정보
가격 및 위치
- 위치:
- Griesperwarth 3-4, 3262 Wang, AT
전화하기
제안 세부 정보
- 광고 ID:
- A4119979
- 업데이트:
- 마지막 업데이트: 20.02.2024
설명
In the field of 3D Thermoforming, we also offer presses, brushing machines, film storage paternoster, and membrane on machineseeker!
Function:
Hsdpfed S Dqnox Aatjfn
The feeding tray of the press is in position, the work piece carpet is pressed under the holding device.
With the vacuum it is hold in position and rotated by 180 °. Then the vacuum turns off and the work piece carpet is turned and the applied charge will be processed directly on the turn over device.
Advantages:
• The 3D-thermoforming productivity increases- because of quick clearing the
table
• Savings of time and staff - the preliminary cutting-out of the pressed parts is
removed completely
• Simple handling of the boards
• The foil edges of the 3D furniture doors are not damaged, because the foil is
not pulled over the edge of the door
• Automatic transfer of the whole carpet to a carpet trimming machine is
optionally available.
• The pins will be protected with this turn over system because the cutout of the
over standing foil is made not on the pin table.
Details:
• Rigid welded frame construction to accommodate the machine parts
• Standard size 2800 x 2220 mm x 1200 mm
• Hydraulic power unit
• Turn table consisting of 9 arms with a special surface of rubber
• Vacuum system with hose connections for the turn table
• Turning cycle approx. 18-25 seconds
• Control System: Siemens LOGO
• Protective fences and security devices
For the presentation of the turning process, a video is available.
Function:
Hsdpfed S Dqnox Aatjfn
The feeding tray of the press is in position, the work piece carpet is pressed under the holding device.
With the vacuum it is hold in position and rotated by 180 °. Then the vacuum turns off and the work piece carpet is turned and the applied charge will be processed directly on the turn over device.
Advantages:
• The 3D-thermoforming productivity increases- because of quick clearing the
table
• Savings of time and staff - the preliminary cutting-out of the pressed parts is
removed completely
• Simple handling of the boards
• The foil edges of the 3D furniture doors are not damaged, because the foil is
not pulled over the edge of the door
• Automatic transfer of the whole carpet to a carpet trimming machine is
optionally available.
• The pins will be protected with this turn over system because the cutout of the
over standing foil is made not on the pin table.
Details:
• Rigid welded frame construction to accommodate the machine parts
• Standard size 2800 x 2220 mm x 1200 mm
• Hydraulic power unit
• Turn table consisting of 9 arms with a special surface of rubber
• Vacuum system with hose connections for the turn table
• Turning cycle approx. 18-25 seconds
• Control System: Siemens LOGO
• Protective fences and security devices
For the presentation of the turning process, a video is available.
귀하의 광고가 성공적으로 삭제되었습니다
오류가 발생했습니다