CNC VTL, 헤드 2개, 디스크 매거진 2개

REM SCR 50 CNC 2S

Vertical Turning center SCR 50 2S
Turning Center’s Specifications
Nominal Turning Envelope
Faceplate Diameter 4.500 mm

Machining Diameter

Optional 4.700 mm – with the CE Enclosure - 5.300 mm ( without )

Machining Heights 2.100 mm /3500 mm
Work Piece Weight 30.000 kg / 50T
Nominal Turning Travels
X & U - Axis Ram Carriage
From -100 mm
To 2.600 mm
Z and W - Axis Ram 1.250 mm / 1700 mm


Faceplate Diameter
4.500 mm/Normal face plate with T-slots

Jaw chucks height 200 mm
Work Table Speed: 0-50rpm


Power Continuous S1 96 kW / 2X75kW

Torque Continuous S1 130,000 Nm / 320,000Nm
Turning main drive mechanism Gear box reducer ZF and belt transmission
Z & W - Axis Ram
Turning Ram - Left and Right side
Ram Size 250 by 250 mm or bigger
Tool holder type KM 63

Tool Storage (ATC)
No. of Tool storage 2 Tool Storage, left and right sides
Stations qty 12 stations per each tool storage
Stations type Turning toolholder
ATC turning capabilities:
Maximum Singular Tool Weight – turning toolholder
Maximum tool weight 50 kg
Maximum tool size 250 x 150 mm X 700 mm
Axes Drives
X and U - Axes Ram Carriage
Power Continuous S1 6.5 kW
Bljdpfx Agshh Dnxsmjc
Thrust Continuous S1 45,000 N
Z-Axis Ram
Power Continuous S1 6.5 kW
Thrust Continuous S1 45,000 N
Axes Rates
X, U And Z, W-Axes Feed Rates 0.02 to 6,000 mm/min
X, U And Z, W-Axes Rapid Rates 6,000 mm/min
Coolant System
Coolant Tank Capacity 2,000 L
Coolant Pressure / Flow Rate:
-external coolant (turning)
-internal

Filtration unit:
-type
-accuracy
6 bar at 100 LPM
40 bar at 60 LPM



Chips conveyor
Conveyor type Hinged (Hardox material)
Width The conveyors should have a width of 600 mm

CNC Control
-type
-producer Sienumerik One Siemens / Fanuc oiF