Reznor 가스 온풍기 UDSA025-3, 홀 난방기, 25.53 kW, 난방용

Reznor UDSA025-3

Reznor UDSA Gas-Fired Air Heater

UDSA gas-fired air heaters – efficient, even at peak performance

The most well-known device from REZNOR is the UDSA gas-fired air heater, which ensures even air distribution in industrial halls. This easy-to-install recirculating air unit is available in 14 output sizes, from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust gas fan. The combustion air can be drawn either from outside or from the hall itself.

The UDSA gas-fired air heater from REZNOR guarantees even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent.
Psdpfjx Ihg Iex Andsrc

UDSA: compact, revolutionary, and trendsetting.
With this generation of devices, halls can be heated in a particularly economical way directly – that is, without central heating – using decentralized, modulating gas-fired air heaters.

REZNOR UDSA
Gas-fired air heater. The advantages:
Efficiency of more than 92%
The unit is also suitable for vertical mounting
Low NOx emissions
Innovative combustion concept
Quiet operation
With CE system certification, version B or C
Compact design for easy installation
Even heat distribution
Vertical and horizontal air guide vanes as standard
Modulation of the heating output up to 50%
EC technology
ErP Ready

These units are directly heated gas-fired air heaters with fan-assisted atmospheric multi-gas burners.
The installation of the gas-fired air heater, including the gas and exhaust connections, may only be carried out by a certified installation company.

The gas-fired air heaters are suitable for:
- Natural gas or liquefied gas operation
- Recirculating air operation
- Intake temperatures below 5°C with a stainless steel heat exchanger *
- Heating operation, 1-stage or 2-stage*, controlled via a room thermostat and a heating control switch
- Ventilation, controlled via ECOtronic TN - L with day/night/week program
- Exhaust gas discharge via the roof, version B or C
- Exhaust gas discharge through the outer wall, version C

Gas-fired air heater type: UDSA025-3
Gas appliance type: B22P-C12-C32-C52-C62
Intended use: DE
Gas category: I2ELL
Gas type: G20 natural gas
Connection pressure: 20 mbar
Nozzle pressure: 8.20 mbar
Max. rated heat input (Hs) QN: 30.08 kW
Max. rated heat input (Hi) QN: 27.75 kW
Max. rated heat output: 25.53 kW
Min. rated heat output:
Connection voltage: 230V 1N, 50Hz
Air volume flow: 2385 m3/h
Protection class: IP20

You can find more items – new and used – in our shop!
International shipping costs on request!

이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.