지멘스 사이클 제어가 장착된 중형 선반 Seiger SLZ 1200 x 3000
Seiger SLZ 1200 x 3000

제조 연도

2000

상태

중고

위치

Wermelskirchen

지멘스 사이클 제어가 장착된 중형 선반 Seiger SLZ 1200 x 3000 Seiger SLZ 1200 x 3000

기계 정보

기계 명칭:: 지멘스 사이클 제어가 장착된 중형 선반 Seiger SLZ 1200 x 3000

제조업체:: Seiger

모델:: SLZ 1200 x 3000

기계 번호:: 990101

제조 연도:: 2000

상태:: 중고

가격 및 위치

위치:: Elbringhausen 22,42929 Wermelskirchen,DE

전화하기

기술 세부 사항

총 길이:: 6,400 mm

총 폭:: 2,200 mm

총 높이:: 2,300 mm

총중량:: 18,500 kg

제안 세부 정보

광고 ID:: A22122268

참조 번호:: 26014-130

업데이트:: 마지막 업데이트: 15.06.2026

설명

Heavy Duty Lathe Seiger SLZ 1200 x 3000with Siemens Sinumerik 810D Cycle Control (Teach-In)The heavy duty lathe Seiger SLZ 1200 x 3000 is equipped with a Siemens Sinumerik 810D cycle control (Teach-In). The machine was most recently used as a faceplate and frontal lathe and therefore operated without a tailstock and without steady rests. However, the machine can still be structurally equipped with appropriate steady rests or a tailstock and used for classic center work.Configuration with AC main drive, large faceplate, hydraulic unit, separate control cabinet, and 2 chip conveyors.Working AreaDistance between centers: 3,000 mmSwing diameter over bed: 1,200 mmSwing diameter over cross slide: 850 mmCross slide travel: 620 mmBed width: 750 mmSpindleSpindl e nose: DIN 55027 size 11Spindle diameter front bearing: 190 mmSpindle bore: 104 mmSpeed range: 5 – 900 min⁻¹Max. torque: 6,000 NmMain DriveDrive power: 37 / 52 kW (100% / 60% duty cycle)FeedX-axi s feed force: 24,000 NZ-axis feed force: 16,000 NRapid traverse X: 7 m/minRapid traverse Z: 4 m/minTool HolderTurning tool cross-section: 40 × 40 mmElectrical DataSupply voltage: 400 VFrequency: 50 HzMax. current consumption: 200 AWorkpiece Weights(Manufacturer specifications for standard configuration)Between centers without steady rest: 5,000 kgBetween centers with 1 steady rest: 6,000 kgBetween centers with 2 steady rests: 7,000 kgFlying in faceplate: 1,800 kgChip Conveyor2 x AME Chip ConveyorsManufacturer: AME GmbH, EmsdettenType: S8 300 Tlg. 63Year of manufacture: 05/2016Not Included:TailstockSteady restsNoteThe machine was most recently used as a faceplate or frontal lathe. Therefore, neither a tailstock nor steady rests are currently available. The machine is particularly suitable for machining large disc, ring, and flange workpieces. A later retrofit for use between centers is fundamentally possible.

Turning diameter max.: 850 mm
Control: • Siemens Sinumerik 810D
Weight approx.: 18,500 kg
Dimensions (LxWxH) approx.: 6400 x 2200 x 2300 mm
Serial number: 990101
Tip width: 3000 - mm
Year of construction: 2,000
Condition: in working order
Terms of payment: 100% prepayment before pick-up
Terms of delivery: From foundation
under power: No
Hfjdezdd E Repfx Akxeh