우드칩 건조기SPE Renergi
우드칩 건조기
SPE Renergi
고정 가격 부가세 별도
€20,000
상태
중고
위치
Cēsis 

기계 정보
가격 및 위치
고정 가격 부가세 별도
€20,000
- 위치:
- Valmieras iela 20A, LV4101 Cesis, LV

전화하기
제안 세부 정보
- 광고 ID:
- A19296676
- 업데이트:
- 마지막 업데이트: 03.12.2025
설명
SPE Renergi Low Temperature Dryer.
The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels.
The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C.
Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur.
Power supply Data:
• Voltage 400 V AC, three phase
• Recommended fuses in supply line: maximum 3x630 A
• Typical power consumption: 200kW
The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet).
Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h.
Airflow: max 200 liter/min
Air pressure: min 4,5 bar, recommended 6,0-8,0 bar
Hjdpfx Aowp Rqfsa Ejfg
Water supply: hot water supply, with a flow of 32 dm3/s.
Water pressure: min 1.5 bar, max 6.0 bar
Operating temperature range:
• Incoming air temperature: -20°C to 50°C
• Relative humidity: 0% to 60%
Raw material/media:
• Relative humidity: 45% to 55% by wieght
• Requested relative humidity: 8% to 15% in the dried material
Capacity:
• The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load
• The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour.
SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of:
• The Machinery Directive 2006/42/EC
• LVD 2006/95/EC
• EMC 2004/108/EC
The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time.
The dryer is already dismantled
All electrical schematics, manual, operating instructions available
Upon request, we can provide a contact person with this type of working dryer for consultation
Price:20,000.00 EUR (VAT is not included)
The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels.
The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C.
Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur.
Power supply Data:
• Voltage 400 V AC, three phase
• Recommended fuses in supply line: maximum 3x630 A
• Typical power consumption: 200kW
The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet).
Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h.
Airflow: max 200 liter/min
Air pressure: min 4,5 bar, recommended 6,0-8,0 bar
Hjdpfx Aowp Rqfsa Ejfg
Water supply: hot water supply, with a flow of 32 dm3/s.
Water pressure: min 1.5 bar, max 6.0 bar
Operating temperature range:
• Incoming air temperature: -20°C to 50°C
• Relative humidity: 0% to 60%
Raw material/media:
• Relative humidity: 45% to 55% by wieght
• Requested relative humidity: 8% to 15% in the dried material
Capacity:
• The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load
• The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour.
SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of:
• The Machinery Directive 2006/42/EC
• LVD 2006/95/EC
• EMC 2004/108/EC
The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time.
The dryer is already dismantled
All electrical schematics, manual, operating instructions available
Upon request, we can provide a contact person with this type of working dryer for consultation
Price:20,000.00 EUR (VAT is not included)
공급자
참고: 무료로 등록하거나 로그인하세요, 모든 정보를 확인할 수 있습니다.
등록일: 2022
2 온라인 광고
문의 보내기
전화기 & 팩스
+371 27 3... 광고
이 광고들도 당신에게 관심이 있을 수 있습니다.
소형 광고
Essen
8,729 km
스팀 보일러
BAYHDK7000
BAYHDK7000
소형 광고
Bergatreute
8,868 km
나무 파쇄기
VecoplanVAZ 2500
VecoplanVAZ 2500
소형 광고
Zheng Zhou Shi
1,345 km
파쇄 장비
MINGYUAN Double rotor hammer crusherDouble stage hammer crusher
MINGYUAN Double rotor hammer crusherDouble stage hammer crusher
소형 광고
Jakling
8,662 km
CNC 터닝 및 밀링 센터
EMCOHyperturn 665 MC Plus
EMCOHyperturn 665 MC Plus
소형 광고
Strenči
7,363 km
정렬 라인
AlmabDry board sorting line
AlmabDry board sorting line
소형 광고
독일
8,579 km
산업용 로봇
Kuka KUKAKR6 + KR16 mit KRC2ed05
Kuka KUKAKR6 + KR16 mit KRC2ed05
소형 광고
Kanzach
8,861 km
크로스 컷 시스템 최적화
Paul14 E, KE oder MKL
Paul14 E, KE oder MKL
소형 광고
Bielefeld
8,605 km
Cutter cut expert ecocam 2 / 플로터
expert international gmbhcut expert ecocam 2
expert international gmbhcut expert ecocam 2
소형 광고
Szentendre
8,349 km
금속에서 저장 사일로
Holtrop & Jansma
Holtrop & Jansma
소형 광고
Rietmolen
8,694 km
완전 제재소 (고정식)
LBL BrentaSpider + Slabber
LBL BrentaSpider + Slabber
귀하의 광고가 성공적으로 삭제되었습니다
오류가 발생했습니다

































































































