수직 머시닝 센터

Spinner Microturn LTBS

Spinner MICROTURN 52 LTBS
Sub-Micron Turn Mill Center with Y / B-Axis and Twin Spindles
AUTOMATION READY - MC0122

Less than 300 hours

No bar feed

Tools and probes included—for all 3 spindles? BMT 45 Probe would stay. No tooling

Chucks etc. included Yes

Coolant: used Water Based

What kind of facility is it in? R and D for performance parts for injector and turbos

Specifications
Work Area:
Swing Diameter: 23.9 in (608 mm)
Turning Diameter (max): 5.9 in (150 mm)
Turning Length(max): 9.8 in (250 mm)

Travels:
X: 23.6 in (600 mm)
Z:13.8 in (350 mm)
Y1 Turret: +/- 1.9 in (50 mm)
Y2 Milling Spindle: +/- 1.9 in (50 mm)
B Rotary: 180 degrees

Feedrate:
Rapid Traverse X: 944.8 ipm (24 m/min)
Rapid Traverse Y: 590.6 ipm (15 m/min)
Rapid Traverse Z: 944.8 ipm (24 m/min)

Spindle #1 Left / #2 Right:
Liquid cooled motorized spindle with C-axis servo drive and encoder for synchronous machining.
Spindle Bore Capacity: 52mm (2.0 in)
Speed: 5,200 rpm

Performance (S6 40%): 22.1 hp (16.5 kW)
Torque (S6 40%): 81.1 ft-lb (110 Nm)
Spindle Nose: DIN 55026-A6

B-Axis Milling Spindle:
Speed (max): 12,000 rpm
Performance (S6 40%): 12 hp (9 Kw)
Torque (S6 40%): 15.4 ft-lbs (21 Nm)
Swivel Angle: +/- 180 degrees
Positional Measurement: Rotary Encoder
Clamping: Hydraulic

Turret:
Stations: 12 / BMT45
Live Tooling Speed: 8,000 rpm
Performance (S3 25%): 5.8 hp (4.3 kW)
Torque (S3 25%): 10 ft-lb (13.6 Nm)

Tool Magazine:
Station Quantity: 72
Holder Type: HSK40
Dsdoyzkdcepfx Akmokn
Tool Length (max): 4.1 in (105 mm)
Tool Diameter (max): 3.5 in (88 mm)
Tool Diameter (max) - Adj Pocket Empty: 3.9 in (100 mm)

Size & Electrical:
Technical design according to CE standards.
Machine Dimensions: 119.3 in (3030 mm) x 111.8 in (2840 mm) x 113.8 in (2890 mm)
Machine Weight: 16,976 lbs (7,700 kg)
Operating Voltage: 3 x 400V (+/-10%)
Main Frequency: 60 Hz (+/- 2%)
Electrical connection: TN network (5-wire)

Standard Equipment
• 72-station tool magazine mounted on top of the machine
• Hydraulic spindle brake on spindle 1
• Hydraulic spindle brake on spindle 2
• Spindle rinsing on spindle 1 (switchable between coolant or compressed air)
• Spindle rinsing on spindle 2 (switchable between coolant or compressed air)
• CNC Clamping Force Setting on Spindle 1 - recommended for convenient setting of clamping force from the CNC program, or on the screen.
• CNC Clamping Force Setting on Spindle 2 - recommended for convenient setting of clamping force from the CNC program, or on the screen.
• Linear tool slide with coolant supply
• Signal lamp
• Rear exit chip conveyor - includes feed pump rated at 5 bar at 20l/min or 3.7 bar at 83l/min
• High pressure coolant system with additional 61 gallon (230 liter) tank. Maximum 319 psi (22 bar)
• Renishaw tool probe for measuring tools in the X/Y/Z axis
• Preparation for mist collector unit
• Automatic operator door that opens at the end of the program and closes with the start. Includes necessary safety technology. Suitable for manual loading or automation access.
• UNIROB universal robot interface via a common plug on the machine control cabinet with the following signals:
• Safety signals (emergency stop/door signals, etc.)
• Standard signals via Profinet PN bus coupler on RJ45 module. Otherwise according to the Unirob-V2021 functional description

CNC Control System