펠렛 프레스SRE Opcon Group
펠렛 프레스
SRE Opcon Group
고정 가격 부가세 별도
€30,000
상태
중고
(완전히 작동합니다)
위치
Straupes pagasts 

기본 정보
가격 및 위치
고정 가격 부가세 별도
€30,000
- 위치:
- Vēži, Straupes pagasts, Cēsu novads, LV-4152, Latvia

전화하기
제안 세부 정보
- 광고 ID:
- A22888555
- 업데이트:
- 마지막 업데이트: 19.11.2026
설명
SPE Renergi Low Temperature Dryer.
The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels.
The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C.
Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate
Protective Ground conductur.
Power supply Data:
• Voltage 400 V AC, three phase
• Recommended fuses in supply line: maximum 3x630 A
• Typical power consumption: 200kW
The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet).
Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h.
Airflow: max 200 liter/min
Air pressure: min 4,5 bar, recommended 6,0-8,0 bar
Knedpsz Iudnofx Accsd
Water supply: hot water supply, with a flow of 32 dm3/s.
Water pressure: min 1.5 bar, max 6.0 bar
Operating temperature range:
• Incoming air temperature: -20°C to 50°C
• Relative humidity: 0% to 60%
Raw material/media:
• Relative humidity: 45% to 55% by wieght
• Requested relative humidity: 8% to 15% in the dried material
Capacity:
• The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of
55% by weight in each load
• The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in
approximately one hour.
SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to
the essential requirements of:
• The Machinery Directive 2006/42/EC
• LVD 2006/95/EC
• EMC 2004/108/EC
The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time.
The dryer is already dismantled
All electrical schematics, manual, operating instructions available
Upon request, we can provide a contact person with this type of working dryer for consultation
Price: 30 000 EUR (VAT is not included)
The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels.
The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C.
Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate
Protective Ground conductur.
Power supply Data:
• Voltage 400 V AC, three phase
• Recommended fuses in supply line: maximum 3x630 A
• Typical power consumption: 200kW
The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet).
Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h.
Airflow: max 200 liter/min
Air pressure: min 4,5 bar, recommended 6,0-8,0 bar
Knedpsz Iudnofx Accsd
Water supply: hot water supply, with a flow of 32 dm3/s.
Water pressure: min 1.5 bar, max 6.0 bar
Operating temperature range:
• Incoming air temperature: -20°C to 50°C
• Relative humidity: 0% to 60%
Raw material/media:
• Relative humidity: 45% to 55% by wieght
• Requested relative humidity: 8% to 15% in the dried material
Capacity:
• The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of
55% by weight in each load
• The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in
approximately one hour.
SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to
the essential requirements of:
• The Machinery Directive 2006/42/EC
• LVD 2006/95/EC
• EMC 2004/108/EC
The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time.
The dryer is already dismantled
All electrical schematics, manual, operating instructions available
Upon request, we can provide a contact person with this type of working dryer for consultation
Price: 30 000 EUR (VAT is not included)
공급자
참고: 무료로 등록하거나 로그인하세요, 모든 정보를 확인할 수 있습니다.
등록일: 2022
2 온라인 광고
문의 보내기
전화기 & 팩스
+371 27 3... 광고
이 광고들도 당신에게 관심이 있을 수 있습니다.
성공
귀하의 메시지가 전송되었습니다.
소형 광고
Trittau
8,399 km
판금 디버링 기계
LissmacSBM-B 1000
LissmacSBM-B 1000
성공
귀하의 메시지가 전송되었습니다.
소형 광고
Gütersloh
8,628 km
Stölting RA 2000 x 8 mm 원형 벤딩 기계
StöltingRA 2000 x 8 mm
StöltingRA 2000 x 8 mm
성공
귀하의 메시지가 전송되었습니다.
소형 광고
Enger
8,603 km
로터리 암 래퍼/팔레트 래퍼
Noxon S.p.A.BOOM S
Noxon S.p.A.BOOM S
성공
귀하의 메시지가 전송되었습니다.
소형 광고
Dorsten
8,717 km
테이블 형 보링 밀
UNIONBFT 90/5
UNIONBFT 90/5
성공
귀하의 메시지가 전송되었습니다.
소형 광고
Karsin
7,996 km
캄비오 66 디바커
Cambio66
Cambio66
성공
귀하의 메시지가 전송되었습니다.
소형 광고
Dinkelscherben
8,786 km
컨베이어 벨트 컨베이어 벨트 Winkel Knick
die magnetprofis2021092703
die magnetprofis2021092703
성공
귀하의 메시지가 전송되었습니다.
소형 광고
Mindelheim
8,812 km
측정 시스템
FAROPrime
FAROPrime
성공
귀하의 메시지가 전송되었습니다.
소형 광고
Tönisvorst
8,766 km
제어 스위치
DEMAGDSE 10 C/CS
DEMAGDSE 10 C/CS
성공
귀하의 메시지가 전송되었습니다.
소형 광고
Borken
8,706 km
Soehnle Professional 2790 계량 터미널, 바닥 저울, 팔레트 저울, 9013 저울, 1.5톤
SoehnleProfessional 2790
SoehnleProfessional 2790
성공
귀하의 메시지가 전송되었습니다.
소형 광고
Luckenwalde
8,372 km
페인트 부스 환기 챔버
ProtonWETLINE-EX
ProtonWETLINE-EX
귀하의 광고가 성공적으로 삭제되었습니다
오류가 발생했습니다














































































