STAMA MC 734M

STAMA MC 734M

This 5-axis STAMA MC 734M was manufactured in 2006. It features a travel range of 800 mm in the X-axis, 520 mm in the Y-axis, and 510 mm in the Z-axis. The machine is equipped with a spindle speed of 12,000 rpm and a tool magazine capacity of 48 + 90 tools. If you are looking to get high-quality machining capabilities, consider the STAMA MC 734M vertical machining centre we have for sale. Contact us for further details.

- Interference Radius: 252 mm- Connected Load: 51 kVA- Total Power Requirement: 46 kW- Connection Voltage: 400 V3 50 Hz- Nominal Current: 75 A- Additional Fuse: 3x 80 A- Min Cross Section Connection: 4x25 mm²- Spindle Taper: Capto 6- Spindle Bearing Diameter: 85 mm- Max Spindle Torque: 142 Nm (S6/20%)- Tool Magazine Capacity: 48 + 90 tools- Tool Clamping Force: 8,000 N- Max Tool Diameter: 160 mm- Max Tool Length: 300 mm- Feed Rate X / Y / Z: 1 - 10,000 mm/min- Rapid Traverse X / Y / Z: 60 m/min- Max Feed Force X / Y: 7,000 N- Max Feed Force Z: 8,000 N- Max Milling Capacity: 600 cm³- Max Drilling Diameter: 40 mm- Max Tapping Diameter: M30- Main Spindle Motor 1: Kessler DMQ .4.AFS/F (22.0 kW, 12,000 rpm)- X-Axis Motor: Fanuc A 06 B-0269-B 100 (5.5 kW, 3,000 rpm)- Y-Axis Motor: Fanuc A 06 B-0266-B 100 (4.5 kW, 3,000 rpm)- Z-Axis Motor: Fanuc A 06 B-0273-B 400 (5.5 kW, 3,000 rpm)- Tool Magazine Motor: Fanuc A 06 B-0235-B 000 (2.5 kW, 4,000 rpm)- 4th Axis B Motor: Fanuc A 06 B-0266-B 100 (4.5 kW, 3,000 rpm)- 5th Axis C Motor: Fanuc A 06 B-0236-B 100 (2.3 kW, 4,000 rpm)- 8th Axis X2 Motor: Fanuc A 06 B-0266-B 100 (4.5 kW, 3,000 rpm)- 7th Axis U Motor: Fanuc A 06 B-0213-B 400 (0.75 kW, 4,000 rpm)- V-Axis Motor: Fanuc A 06 B-0216-B 400 (1.0 kW, 4,000 rpm)- Supplementary Magazine Motor: Fanuc A 06 B-216-B 400 (1.0 kW, 4,000 rpm)- Flat Magazine Motor: Fanuc A 06 B-0235-B 100 (2.5 kW, 4,000 rpm)- Coolant Pump 1: Brinkmann BFS 238/70 (5.0 kW, 2,900 rpm)- Coolant Pump 2: Brinkmann TH 90/470-540 (3.3 kW, 2,900 rpm)- Dirty Water Pump: Brinkmann TAS 603/280-6156 (5.5 kW, 2,900 rpm)- Wash Gun Pump: Brinkmann TH 90/470-540 (3.3 kW, 2,900 rpm)- Self-cleaning Lamella Filter Motor: Motovario P 63 B 4 (0.18 kW, 1,360 rpm)- Chip Conveyor Motor: Bauer BS 06-74V/D 05 LA4/SP (0.25 kW, 1,350 rpm)- Hydraulic Unit Motor: Rexroth UPE5-4.00A10V5010ANT-H-1-025 (4.0 kW, 1,390 rpm)- Cabin Extraction Motor: Ziehl-Abegg RH 31 M-20K.5H.2R (0.75 kW, 2,880 rpm)- Conveyor Belt Motor: SEW-Eurodrive R 47 DT 7104/AS B1 (290 Nm, 1,380 rpm)
Included Equipment:
Chip conveyor, auxiliary magazine, coolant system, workpiece loader

Tjdpfx Ajzzxa Nem Uod
Technical Specification
Through-spindle Coolant Yes