테이블 보링 밀

TOS KUŘIM CES 150

Specification
Dimension of bed – width 1170 mm
height 290 mm
length 2000 mm
Dimension of slide - width x length (with no extensions) 1340 x 1300 mm
height over the sliding surface 320 mm
Length of travel along the „W“ axis 500 mm
Rotary table surface clamping dimensions Ø 1500 mm
Centering hole 100 H7 mm
Height of the rotary table from the sliding surface 590 mm
Number of clamping slots 9
Size of clamping T-slots. 22H7
Spacing of the T-slots 160 mm
Speed of rotation smoothly controllable within the limits 1 ÷720 °/min
Maximum centric load on the rotary table due to the workpiece mass 15000 kg
Maximum eccentric load on the rotary table due to the workpiece weight
(up to 750 mm distance of the workpiece center of gravity from the rotary table axis) 5000 kg
Maximum rotary table bearing capacity – centre of gravity from table axis 500 mm
Maximum torque on rotation 15000 Nm
Maximum torque on stiffening 10000 Nm
Maximum tilting moment to a plane perpendicular to clamping surface 15000 Nm
Total time required for the table turning cycle through 360° 30 sec
Working feed along the W-axis 1÷5000 mm.min-1
Fast feed along the W-axis 5000 mm.min-1
Oil working pressure (table stiffening) 5 MPa
(drive pre-stressing) - MPa
Table positioning accuracy
Rotation
Bilateral accuracy of the A-position setting by the ISO 230-2 16 µm
Unilateral repeatability of the R-position setting by the ISO 230-2 8 µm
Linear axis
Gsdpew Uz S Aefx Aateuh
Bilateral accuracy of the A-position setting by the ISO 230-2 0,02 µm
Unilateral repeatability of the R-position setting by the ISO 230-2 0,01 µm
Table turning part peripheral accuracy ±0,01 mm