알루미늄 원형 톱TRONZADORAS MG
TLG-352-A
알루미늄 원형 톱
TRONZADORAS MG
TLG-352-A
제조 연도
2014
상태
중고
위치
Ahaus 

사진은 보여줍니다
지도 표시
기계 정보
가격 및 위치
- 위치:
- 48683 Ahaus

전화하기
제안 세부 정보
- 광고 ID:
- A21528292
- 참조 번호:
- 1125-9164106
- 업데이트:
- 마지막 업데이트: 17.03.2026
설명
saw blade diameter 350 x Ø 32.0 mm
capacity degrees: flat 175 x 75 mm
capacity degrees: square 110 x 110 mm
capacity degrees: flat 100 x 80 mm
capacity degrees: square 85 x 85 mm
turning speeds 3000 U/min
total power requirement 1.5 kW
weight of the machine ca. 180 kg
dimensions of the machine ca. 870 x 710 x 1435 mm
Equipment :
- semi-automatic circular saw for cutting PVC and aluminum profiles
- two-hand safety operation
- Miter adjustment :
* left
* right 0 / /
- Large protective hood, covers entire working area
- Saw blade
- 2x vertical pneumatic clamping cylinders
- Adjustable blade and cutting feed
- Air dust gun
Work sequence
1) Setting the cutting angle
2) Inserting the material
3) Adjusting the stroke speed
4) Bring the clamping cylinder up to 20 mm of material
Iasdoyu U Dfopfx Adiep
5) Clamp the material
6) The machine is ready for operation by pressing the start button.
7) Press and hold the two SAW buttons, the material is sawn.
8) At the end of the cycle, release both SAW buttons
and press the STOP button
9) Open the vice and remove or push the material forward
* Special accessories included :
- ALU chip extractor
capacity degrees: flat 175 x 75 mm
capacity degrees: square 110 x 110 mm
capacity degrees: flat 100 x 80 mm
capacity degrees: square 85 x 85 mm
turning speeds 3000 U/min
total power requirement 1.5 kW
weight of the machine ca. 180 kg
dimensions of the machine ca. 870 x 710 x 1435 mm
Equipment :
- semi-automatic circular saw for cutting PVC and aluminum profiles
- two-hand safety operation
- Miter adjustment :
* left
* right 0 / /
- Large protective hood, covers entire working area
- Saw blade
- 2x vertical pneumatic clamping cylinders
- Adjustable blade and cutting feed
- Air dust gun
Work sequence
1) Setting the cutting angle
2) Inserting the material
3) Adjusting the stroke speed
4) Bring the clamping cylinder up to 20 mm of material
Iasdoyu U Dfopfx Adiep
5) Clamp the material
6) The machine is ready for operation by pressing the start button.
7) Press and hold the two SAW buttons, the material is sawn.
8) At the end of the cycle, release both SAW buttons
and press the STOP button
9) Open the vice and remove or push the material forward
* Special accessories included :
- ALU chip extractor
문의 보내기
전화기 & 팩스
+49 5939 ... 광고
귀하의 광고가 성공적으로 삭제되었습니다
오류가 발생했습니다





















