레이저 절단기Trumpf
TCF 1
기술 세부 사항
레이저
제공
- 위치:
- Hessen, 독일
– 거리: 약 8,714 km
- 가용성:
- 경매 종료 직후 바로
- 인도 조건:
- FCA
무료
무료
설명
ITEC Automation & Laser AG Gantry Portal for Coil Line with Trumpf TCF 1 Laser + GSW AG Decoiler MHR 2.5 / 1250 + Straightening and Feeding Machine VRMA 80 / 76 + Motoman ERCS-HP20-AE00 Robot
The machine will remain in operation until week 35.
The system has been regularly serviced and was partially overhauled in 2022.
Sale does not include extraction system and platform!
TECHNICAL DETAILS
Trumpf TCF 1 MHR 2.5 / 1250
Wavelength: 10.6 μm
Maximum output power: 2,000 W
Continuously adjustable power range: 100–2,000 W
Power stability referenced to nominal output: ±2 %
Beam diameter at the output window: 26 mm
Divergence angle (half angle): 0 mrad
Power distribution: TEM₀₀
Pulse frequency: 10 Hz–100 kHz
Marking mode frequency: 10 Hz
Marking mode power: 80 W
Pulse width: 10 μs–CW
Decoiler MHR 2.5 / 1250
Load capacity: max. 2,500 kg
Outer coil diameter: max. 1,250 mm
Strip width: max. 600 mm
Expansion range: min. 380 (480) mm
Expansion range: max. 430 (530) mm
Mandrel height: 1,000 mm
Drive and speed
Speed: approx. 17.5 rpm
Electric auxiliary drive power: 1.1 kW
Electrical connection
Supply voltage: 3 × 400 V
Frequency: 50 Hz
Noise emission
Sound level: 70 dB(A)
EQUIPMENT
Fixed trailing edge
Neutral conductor (N) and protective earth (PE)
Straightening and feeding machine VRMA 80 / 76
Passage width: max. 100–800 mm
Strip thickness: min. 0.4 mm
Strip thickness: max. 1.5 mm
Strip thickness at full width: max. 1.0 mm
Number of straightening rollers: 7
Number of feed rollers: 2
Roller diameter: 60 mm
Straightening roller spacing: 130 mm
Speed: approx. 15 m/min
Pass height above floor: approx. 1,000 mm
Drive type: Servomotor
Electric drive power: 2.2 kW
Drive speed: 3,000 rpm
Supply voltage: 3 × 400 V
Frequency: 50 Hz
Conductors: N, PE
Sound level: 70 dB(A)
Motoman ERCS-HP20-AE00 Robot
Number of axes: 6
Payload: 20 kg
Repeatability: ±0.06 mm
Weight: approx. 280 kg
S-axis (rotation): ±180°
L-axis (lower arm): +155° / -110°
U-axis (upper arm): +255° / -165°
R-axis (wrist roll): ±200°
B-axis (wrist pitch): ±140°
T-axis (wrist twist): ±360°
S-a
이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.
결제 처리
- 구입 부대 비용:
- 18 %
- 지불 조건:
- 100% 선불 결제
- 결제 방식:
은행 송금
제안 세부 정보
- 광고 ID:
- A22567477
- 참조 번호:
- AUC-2608106
- 업데이트:
- 마지막 업데이트: 19.08.2026
- 독점 제공:
- 경매에서만 구매 가능
견학
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-신뢰의 인증 마크
신뢰 마크란 무엇입니까?
Machineseeker는 선정된 딜러에게 Machineseeker 신뢰 인증마크를 부여합니다. 발급 전에 숙련된 Machineseeker 직원에 의해 표준화되고 철저한 검사가 수행됩니다.
우리는 무엇을 점검합니까?
영업 허가증 또는 상업 등기부 등본의 확인
판매자의
우편 주소 확인
은행 연결의 검증
대표 번호의
전화
접근 가능성 확인
경제 정보
에는 부정적인 특성이 포함되어서는 안 됩니다
구매자 불만
은(는) 인증 마크 박탈로 이어질 수 있습니다이것이 구매자로서 귀하에게 어떤 의미가 있습니까?
Machineseeker 신뢰 씰을 통해 구매자는 직접 검증하지 않고도 매우 높은 확률로 정직하고 성실하게 거래하는 신뢰할 수 있는 판매자를 식별할 수 있습니다.
물론 구매 과정에서 의견 차이가 발생할 수 있습니다. Machineseeker는 Machineseeker에서 활동 중인 구매자 또는 판매자에 의한 법률 위반에 대해 책임을 지지 않습니다.