파일럿 필터레이션 플랜트Tuchenhagen
Pilot Filtration plant
파일럿 필터레이션 플랜트
Tuchenhagen
Pilot Filtration plant
제조 연도
2018
상태
중고
위치
Lopik 

사진은 보여줍니다
지도 표시
기계 정보
가격 및 위치
- 위치:
- Handelsweg 4, 3411 NZ Lopik, Netherlands

전화하기
제안 세부 정보
- 광고 ID:
- A20718332
- 업데이트:
- 마지막 업데이트: 09.12.2025
설명
Pilot filtration plant designed for NF/RO filtration (MF/UF operation also possible).
The system includes a reverse osmosis (RO) unit—prepared for operation but without the 8" filter housing.
The installation is built on a mobile stainless-steel frame equipped with four adjustable feet. It includes a double-jacketed balance vessel with a total capacity of 100 liters, fitted with two level sensors and one temperature sensor. The vessel is equipped with a Typhoon mixer (model 03TY0196) featuring a round blade, 0.44 kW motor, and 1,690 rpm speed.
The system is fitted with three E&H flow meters and a Hydra-Cell pump (model G10XDS0SFEMB) capable of handling pressures up to 103 bar and viscosities up to 1,000 mPa·s. The pump is a piston-diaphragm type with a seal-less design, driven by a 3 kW motor (7.2 A, 949 rpm, 50 Hz).
Additional components include a Samson steam valve, two overpressure valves, and a tubular heat exchanger for retentate cooling via ice water. A high-pressure centrifugal circulation pump (Pomac make) is also installed.
Hpodpex Ek D Rjfx Adnoa
Control and monitoring are managed through a Simatic OP7 operator panel and a Siemens Simatic S7-300 PLC housed in an electrical panel, which also contains three Siemens frequency converters and an E&H data recorder.
Documentation: Electrical schematic available.
The system includes a reverse osmosis (RO) unit—prepared for operation but without the 8" filter housing.
The installation is built on a mobile stainless-steel frame equipped with four adjustable feet. It includes a double-jacketed balance vessel with a total capacity of 100 liters, fitted with two level sensors and one temperature sensor. The vessel is equipped with a Typhoon mixer (model 03TY0196) featuring a round blade, 0.44 kW motor, and 1,690 rpm speed.
The system is fitted with three E&H flow meters and a Hydra-Cell pump (model G10XDS0SFEMB) capable of handling pressures up to 103 bar and viscosities up to 1,000 mPa·s. The pump is a piston-diaphragm type with a seal-less design, driven by a 3 kW motor (7.2 A, 949 rpm, 50 Hz).
Additional components include a Samson steam valve, two overpressure valves, and a tubular heat exchanger for retentate cooling via ice water. A high-pressure centrifugal circulation pump (Pomac make) is also installed.
Hpodpex Ek D Rjfx Adnoa
Control and monitoring are managed through a Simatic OP7 operator panel and a Siemens Simatic S7-300 PLC housed in an electrical panel, which also contains three Siemens frequency converters and an E&H data recorder.
Documentation: Electrical schematic available.
귀하의 광고가 성공적으로 삭제되었습니다
오류가 발생했습니다
















































































