견인차VOLVO
Arbeitsbühnen Baumaschinentransporter mit Rampen
견인차
VOLVO
Arbeitsbühnen Baumaschinentransporter mit Rampen
고정 가격 부가세 별도
€224,500
제조 연도
2026
상태
신규
위치
Petershagen 

사진은 보여줍니다
지도 표시
기계 정보
가격 및 위치
고정 가격 부가세 별도
€224,500
- 판매자 위치:
- Auf der Tappenau 15, 32469 Petershagen, 독일

전화하기
기술 세부 사항
- 주행거리:
- 100 km
- 동력:
- 375 킬로와트 (509.86 마력)
- 연료 종류:
- 디젤
- 기어 방식:
- 자동
- 차축 구성:
- 3축
- 총중량:
- 32,000 kg
- 적재 공간 길이:
- 9,000 mm
- 적재 공간 너비:
- 2,550 mm
- 배출 등급:
- 유로 6
- 색상:
- 흰색
- 장비:
- ABS, 내비게이션 시스템, 에어컨, 주차 히터
제안 세부 정보
- 광고 ID:
- A19742030
- 업데이트:
- 마지막 업데이트: 06.02.2026
설명
4-axle Volvo machine/MEWP transporter
Dedpsw Itmrofx Aa Sjun
FH 500 8x2R
- Trailing axle, electro-hydraulically steered, single tires
- Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle
- High-safety long-distance FH cab
- Cab auxiliary heater, 2 kW
- 33 l refrigerator with freezer compartment, under bunk
- Air suspension on front axle(s)
- Gearbox/I-Shift operated via driver's seat control unit
- I-Shift drive modes: Standard, Performance, and Economy
- I-See with map-based topography and traffic information
- Eco Cruise Control (cruise control) including brake cruise control
- Manual gear selection possible in automatic mode (incl. kickdown) Adaptive traction control
- Adaptive cruise control (ACC) with collision warning and emergency braking
- Lane keeping assist
- Side collision avoidance and turn assist (both sides)
- Driver alert system warns of fatigue
- VEB Volvo engine brake
- etc.
WIESE body for MEWP and construction machine transport with hydraulic loading ramps
With 2 pairs of wheel recesses including covers
Body dimensions:
- Length: approx. 9,050 mm usable
- External width: 2,550 mm
- Loading height top of floor: approx. 1,050 mm unladen
- Robust, weight-optimized welded steel construction, box-section design
- Short cross member spacing for high point loads
- Tapered rear for low ramp angle
- Outer frame profile 90°
- Front wall in reinforced version
- Internal toolbox at the bottom in front of front wall
- Grating floor
- Designed for 5,000 daN wheel load
- Steel sheet boxes above axles and outer frame with anti-slip coating
Load securing:
- 9 pairs of heavy-duty lashing rings, 8 to., recessed into outer frame
- Longitudinal members each with Multi-X contour along full length with numerous 2.5 to. lashing points
- 4 lashing eyes 8 to. recessed at rear (left/right/center/center)
- 4 lashing eyes 8 to. recessed in front wall (left/right/center/center)
- Outer frame profile 90°
Loading ramps:
Type: WFB 20 S-2
Load capacity: 18,000 kg per pair
Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm)
Platform width approx.: 850 mm per ramp
- Ramps as 2 individual/extendable units, both ramps laterally adjustable
- Ramp can be used as drive-on ramp and as through ramp for warehouse equipment (extension section remains closed), the fixed ramp part is placed on the loading dock
- Robust tension bar for transport securing (alternative: strap tensioning)
- 2 hydraulic rear supports with pads, with warning buzzer and indicator in cab
- Ramp and support operation via electro-hydraulic system
- Remote control and emergency control on the control block
- Stainless steel control box mounted on frame side
- Superwinch 8.2 t with approx. 20 m steel cable
- Step access with grab handles left/right for cargo area access
- 5 stainless steel drawer-type toolboxes, incl. lighting (option, extra charge)
- Side skirting as per sample pictures (green vehicle) optional, extra charge
- KTL body coating
- Trailer coupling with 3.3 t ball head at rear
- 4 LED work lights
- 2 LED taillights mounted high on front wall
- 4 external LED work lights on frame as area illumination
- 2 LED work lights at rear
- 1 removable rotating beacon at rear
The stock vehicle is supplied with cab in white and body in nova grey (external frame painted in RAL color of your choice on request).
이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.
Dedpsw Itmrofx Aa Sjun
FH 500 8x2R
- Trailing axle, electro-hydraulically steered, single tires
- Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle
- High-safety long-distance FH cab
- Cab auxiliary heater, 2 kW
- 33 l refrigerator with freezer compartment, under bunk
- Air suspension on front axle(s)
- Gearbox/I-Shift operated via driver's seat control unit
- I-Shift drive modes: Standard, Performance, and Economy
- I-See with map-based topography and traffic information
- Eco Cruise Control (cruise control) including brake cruise control
- Manual gear selection possible in automatic mode (incl. kickdown) Adaptive traction control
- Adaptive cruise control (ACC) with collision warning and emergency braking
- Lane keeping assist
- Side collision avoidance and turn assist (both sides)
- Driver alert system warns of fatigue
- VEB Volvo engine brake
- etc.
WIESE body for MEWP and construction machine transport with hydraulic loading ramps
With 2 pairs of wheel recesses including covers
Body dimensions:
- Length: approx. 9,050 mm usable
- External width: 2,550 mm
- Loading height top of floor: approx. 1,050 mm unladen
- Robust, weight-optimized welded steel construction, box-section design
- Short cross member spacing for high point loads
- Tapered rear for low ramp angle
- Outer frame profile 90°
- Front wall in reinforced version
- Internal toolbox at the bottom in front of front wall
- Grating floor
- Designed for 5,000 daN wheel load
- Steel sheet boxes above axles and outer frame with anti-slip coating
Load securing:
- 9 pairs of heavy-duty lashing rings, 8 to., recessed into outer frame
- Longitudinal members each with Multi-X contour along full length with numerous 2.5 to. lashing points
- 4 lashing eyes 8 to. recessed at rear (left/right/center/center)
- 4 lashing eyes 8 to. recessed in front wall (left/right/center/center)
- Outer frame profile 90°
Loading ramps:
Type: WFB 20 S-2
Load capacity: 18,000 kg per pair
Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm)
Platform width approx.: 850 mm per ramp
- Ramps as 2 individual/extendable units, both ramps laterally adjustable
- Ramp can be used as drive-on ramp and as through ramp for warehouse equipment (extension section remains closed), the fixed ramp part is placed on the loading dock
- Robust tension bar for transport securing (alternative: strap tensioning)
- 2 hydraulic rear supports with pads, with warning buzzer and indicator in cab
- Ramp and support operation via electro-hydraulic system
- Remote control and emergency control on the control block
- Stainless steel control box mounted on frame side
- Superwinch 8.2 t with approx. 20 m steel cable
- Step access with grab handles left/right for cargo area access
- 5 stainless steel drawer-type toolboxes, incl. lighting (option, extra charge)
- Side skirting as per sample pictures (green vehicle) optional, extra charge
- KTL body coating
- Trailer coupling with 3.3 t ball head at rear
- 4 LED work lights
- 2 LED taillights mounted high on front wall
- 4 external LED work lights on frame as area illumination
- 2 LED work lights at rear
- 1 removable rotating beacon at rear
The stock vehicle is supplied with cab in white and body in nova grey (external frame painted in RAL color of your choice on request).
이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.
이 광고들도 당신에게 관심이 있을 수 있습니다.
소형 광고
Petershagen
8,566 km
자동차 운반 트럭
VOLVOArbeitsbühnen Baumaschinentransporter mit Rampen
VOLVOArbeitsbühnen Baumaschinentransporter mit Rampen
소형 광고
HETEREN
8,753 km
크레인 트럭
VolvoFMX 500 FMX 500 8x2 Euro 6 Effer 395-8S
VolvoFMX 500 FMX 500 8x2 Euro 6 Effer 395-8S
소형 광고
Petershagen
8,566 km
평상 트럭
VOLVOArbeitsbühnen Baumaschinentransporter mit Rampen
VOLVOArbeitsbühnen Baumaschinentransporter mit Rampen
소형 광고
터키
7,929 km
JCB JS290 롱 리치 붐 암 제조
JCBJS290 Long Reach Boom-Arm Manufacturing
JCBJS290 Long Reach Boom-Arm Manufacturing
소형 광고
Petershagen
8,566 km
견인차
MANBaumaschinen- Arbeitsbühnentransporter Rampen
MANBaumaschinen- Arbeitsbühnentransporter Rampen
소형 광고
스페인
9,935 km
미니 굴삭기
DaewooSO75 V PLUS
DaewooSO75 V PLUS
소형 광고
Nowy Sacz
8,121 km
도로 롤러
CATERPILLAR306 * Raupenbagger * Top Zustand !
CATERPILLAR306 * Raupenbagger * Top Zustand !
소형 광고
Deventer
8,709 km
표준-SZM
IvecoEuroCargo 80 ML80E22 tractor with Heinemann 2 a...
IvecoEuroCargo 80 ML80E22 tractor with Heinemann 2 a...
소형 광고
Stabroek
8,869 km
크롤러 굴착기
HitachiZX135US
HitachiZX135US
소형 광고
Nieuwerkerk aan den IJssel
8,803 km
덤프 트럭
MANTGS 33.400 BB CH Tipper Truck (10 units)
MANTGS 33.400 BB CH Tipper Truck (10 units)
귀하의 광고가 성공적으로 삭제되었습니다
오류가 발생했습니다




















































































































































