만능시험기ZwickRoell
AllroundLine 50 kN
기계 정보
제공
- 위치:
- Baden-Württemberg, 독일
– 거리: 약 8,820 km
- 가용성:
- 경매 종료 직후 바로
- 인도 조건:
- FCA
무료
무료
설명
TECHNICAL DETAILS
Load Cells: 2 units Xforce K
Testing Software: testControl II & testXpert III
Load Cell: Xforce K
Measuring Amplifier: DCSC module
Documentation: available
FURTHER TECHNICAL DETAILS - as per documentation, no guarantee
Maximum Test Force Fmax: 50 kN
Total Height of Test Space: 1,534 mm
Height of Lower Test Space without Fixtures: 1,355 mm
Height of Upper Test Space without Fixtures: 1,369 mm
An additional crosshead is required for the upper test space.
Test Space Width: 440 mm
Load Frame
Load Frame Height without Uprights: 1,714 mm
Load Frame Height with Uprights: 1,829–2,694 mm
Load Frame Width without Uprights: 760 mm
Load Frame Width with Uprights: 936 mm
Load Frame Width with Uprights and Machine Electronics: 1,124 mm
Load Frame Depth: 140 mm
Load Frame Depth without Uprights and with Drive Base: 507 mm
Load Frame Depth with Uprights: 762 mm
Load Frame Depth with Uprights and Machine Electronics: 765 mm
Weight and Footprint
Weight with Machine Electronics, Uprights, and typical fixtures: approx. 300 kg
Pure Footprint: 0.01 m²
Load Frame Base Area: 0.713 m²
Average sound pressure level at maximum speed, measured 1 m from the machine front: 61 dB(A)
Drive
Crosshead Speed: min. 0.0005 mm/min up to max. 600 mm/min
Crosshead Return Speed: max. 1,000 mm/min
Deviation from Set Drive Speed: max. 0.05% of actual value
Drive Travel Resolution: 0.317891 nm
Positioning Repeatability without Directional Change: ±2.0 µm
Adaptive Control
Cycle Time: 1,000 Hz
Power Supply
CEE 7 (Schuko) mains connector
Mains Connection: 230 V, 1 Ph/N/PE
Power Consumption at Full Load: approx. 2.3 kVA
Mains Frequency: 50/60 Hz
Mains Cable Protection: 16 A
Safety Functions
The drive is equipped with a mechanical holding brake.
When switched off, in the event of emergency stop activation, or during a power failure, the materials testing machine remains at its current position.
Unintended release due to the energy stored in the specimen is prevented.
이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.
결제 처리
- 구입 부대 비용:
- 18 %
- 지불 조건:
- 100% 선불 결제
- 결제 방식:
은행 송금
제안 세부 정보
- 광고 ID:
- A22432547
- 참조 번호:
- AUC-2607217
- 업데이트:
- 마지막 업데이트: 27.07.2026
- 독점 제공:
- 경매에서만 구매 가능
견학
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-신뢰의 인증 마크
신뢰 마크란 무엇입니까?
Machineseeker는 선정된 딜러에게 Machineseeker 신뢰 인증마크를 부여합니다. 발급 전에 숙련된 Machineseeker 직원에 의해 표준화되고 철저한 검사가 수행됩니다.
우리는 무엇을 점검합니까?
영업 허가증 또는 상업 등기부 등본의 확인
판매자의
우편 주소 확인
은행 연결의 검증
대표 번호의
전화
접근 가능성 확인
경제 정보
에는 부정적인 특성이 포함되어서는 안 됩니다
구매자 불만
은(는) 인증 마크 박탈로 이어질 수 있습니다이것이 구매자로서 귀하에게 어떤 의미가 있습니까?
Machineseeker 신뢰 씰을 통해 구매자는 직접 검증하지 않고도 매우 높은 확률로 정직하고 성실하게 거래하는 신뢰할 수 있는 판매자를 식별할 수 있습니다.
물론 구매 과정에서 의견 차이가 발생할 수 있습니다. Machineseeker는 Machineseeker에서 활동 중인 구매자 또는 판매자에 의한 법률 위반에 대해 책임을 지지 않습니다.