모바일 팔레트 래퍼

ATLANTA - mobiler StretchWickler SFERA Easy Leasing ab 180,€*Monat

Stretch winder ATLANTA SFERA Easy
6 programs can be saved individually
Winding height 2150mm
Mast height 2050 mm (fits through almost every door)
Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm
GMK (compass) The start and end of the winding is always identical
Manual line formation
Tension of the film can be saved in 4 steps

TECHNICAL DETAILS:
two maintenance-free AGM batteries 12 V - 100 Ah connected in series
160 pallets per charge - charging time: 8 -10 hours
High frequency battery charger with LED indicator
Wrapping height “machine with MAST (pallet included) 2,150 mm
Height query via light button or by entering dimensions on the display
Protective bar for emergency stop of the travel drive
Emergency stop switch according to CE regulations
Acoustic warning signal and warning light when the machine starts
Fall protection for the film slide
Push button for start & stop
Function of the machine according to CE standards Ø 22 mm

ADJUSTABLE PARAMETERS ON THE CONTROL PANEL:
All function parameters can be set via the display
F00 - Screen lock program change
F02 - Adjustable machine speed around the pallet up to 80 m/min
Lifting carriage speed can be adjusted up and down independently of each other
F03 - lifting carriage speed up from 1.3 up to 5.4 m/min
Fjdpfx Adowtc Azs Usgi
F04 - carriage speed down from 1.3 to 5.4 m/min
F05 - Number of wraps on the pallet foot (1 - 10 wraps)
F06 - number of wraps on the pallet head (1 - 10 wraps)
F09 - Pallet wrapping height setting
F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable
F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable
F62 - Ergonomic height for film change
Display foil consumption (option for PRS - PS)

ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL:
6 storable wrapping programs for SFERA EASY
F01 - 1 - cross winding (up/down)
F01 - 2 - Single wrap (only up or only down)
F10 - F11 - Wrap cycle with preset start and stop height
F12 - Winding to a stored height (switching off the light button for the height)
F21 - Wrapping cycle for large pallets
F22 / F23 - Winding cycle for cover sheet film
F29 - Soft start cycle for edge protection application
F30 - F31 - Wrap cycle with gain and adjustable number of wraps
Soft start to reduce film tears on sharp pallet edges