CNC 가공 센터 Biesse Rover C 9.50 (2007)

Biesse Rover C 9.50

- Working area: X = 4600 mm / Y = 1935 mm / Z = 275 mm
- CE safety devices
- 8 ATS plate holders - L = 1525 mm - 24 sliding rails
- Automatic positioning of 8 plate holders and sliding rails (EPS X-Y)
- Conveyor belt for removing chips and scrap
- Pneumatic locking system, divided into 2 working areas in X
- 8 rear reference stops with a stroke of 115 mm
- 8 stops with a stroke of 140 mm, positioned at 1175 mm (L = 1280 - 1525 - 1800 mm)
- 8 stops with a stroke of 140 mm, positioned at 770 mm (L = 1280, 1525, 1800 mm)
- 4 lateral stops with a stroke of 140 mm (2 left + 2 right), including pneumatic system.
- 4 removable center stops with a stroke of 140 mm (2 left + 2 right), including pneumatic system.
- Sensor for detecting lowered stops.
- Pneumatic system for lifting rod holders.
- 6 lifting rod holders for easy loading - H = 74 mm modules.
- Vacuum system for a 250 m3/h pump
- 250 m3/h rotary vane vacuum pump for standard vacuum system

Composition C3-A1
- Device for mounting a chip deflector with a pneumatic or inductive sensor on a 5-axis machining unit.
- Flange for mounting aggregates on a work unit with 5 interpolating axes. *Aggregates can only be used if the spindle is in the vertical position.

Composition C3-P2
- Additional Z-slide for rear work units, controlled by an independent Z-axis
- 16 vertical and 4 horizontal drilling spindles in the Y direction
- Chain-type tool changer with 22 positions at 180 mm center distance
- Iron gripper for chip deflectors with pneumatic or inductive sensor, positioned in the chain-type tool changer
- RH chip deflector with inductive sensor for standard spindle or 15 kW 5-axis spindle * requires the device for the chip deflector * requires the flange for mounting aggregates when using a 5-axis spindle * requires the C-axis when using a standard spindle
- Liquid cooling unit for liquid-cooled systems, can cool two spindles or one spindle and a liquid-cooled drilling head.
- Automatic lubrication system
- Control unit with 5 interpolating axes. This unit enables numerically controlled interpolation of the spindle on 5 axes. The spindle has high power while simultaneously having reduced dimensions.

Note:
Bsdpfxezux Nwj Aifoln
- Additional overhauled 5-axis main spindle
- 8 horizontal drilling spindles, 12 vertical drilling spindles, and nut saw are out of order.

이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.