완전한 도장 플랜트Cefla
MITO 2B
완전한 도장 플랜트
Cefla
MITO 2B
VB 부가세 별도
€115,000
제조 연도
2023
상태
신규
(완전히 작동합니다)
위치
Opacz-Kolonia 

기본 정보
가격 및 위치
VB 부가세 별도
€115,000
- 위치:
- Nowa 3, 05-816 Opacz-Kolonia, Polska

전화하기
기술 세부 사항
치수 및 중량
총 길이:
4,885 mm
총 폭:
3,780 mm
총 높이:
2,400 mm
출력 세부사항
입력 전압:
380 V
입력 주파수:
50 헤르츠
에너지 소비:
17 킬로와트시
입력 전류 유형:
삼상
문서화 및 인증
보증 기간:
12 개월
축 사양
X축 이송 속도:
6 m/분
추가 세부 정보
작업 폭:
1,300 mm
작업 높이:
900 mm
제안 세부 정보
- 광고 ID:
- A22469237
- 업데이트:
- 마지막 업데이트: 05.08.2026
설명
DIMENSIONS OF PAINTED COMPONENTS
The line will ensure good qualitative results under all operating conditions, provided that components with incorrect parameters are eliminated at the beginning, such as:
• Bent, warped components;
• Components with defects that would render them unsuitable for use even after painting.
• Maximum length 2500 mm
• Minimum length 350 mm
• Maximum width 1300 mm
• Minimum width 50 mm
• Maximum thickness 60 mm
• Minimum thickness 5 mm
• Maximum deflection 10 mm
• Average temperature 15-35 °C
• Minimum temperature -5 °C
• Relative humidity %
• Operating speed 2 [2-3] m/min
• Operating height 900 mm
MATERIAL
• Wood and wood-based materials
END PRODUCT
• Furniture
• Outdoor furniture
SHAPE
• Shaped components
TYPES OF PAINTS
• Solvent-based paints
• Water-based paints
Hjdpfjzq Axzsx Ah Iofp
FINISH
• Transparent
• Matte (< 25)
• Pigmented
• Semi-matte (30-40)
MITO B2: MITO B2 SPRAYING AUTOMAT
Spraying automat with 2 arms, dry air filtration system, and conveyor belt.
Machine designed for continuous coating of various types of profiled panels.
Spraying in continuous mode on any type of panel. No paint mist on the underside of the panels thanks to the 1650 mm conveyor belt.
Robust machine construction. Excellent access to the interior through glazed areas, access doors, and retractable parts.
Components are transported by a CFB belt transport system with a sealed edge, driven by a motor with a frequency inverter. The outer side of the belt is located outside the cabin to allow vapor containment. The axis is driven by a brushless motor and a toothed belt, ball bearings. Guarantees the best feed, acceleration and deceleration parameters, allowing for maximum coating quality.
New and patented PLENUM (patented air diffusion system).
Thanks to flow studies, better paint management (savings), better machine cleaning, and better coating quality are achieved.
Unique management of component transport with precise speed control prevents soiling of the lower part of the components during acceleration/deceleration.
Control electrical cabinet, located at the machine entrance on the service side, with electrical installation and connection channel to the machine.
Wide, robust and efficient double-zone with a filter section. Flow regulated by a frequency inverter.
Tanks with supports for Columbus filters
Fire-resistant ATEX cat. 2G exhaust fan
HCD type belt cleaning and paint recovery system.
Perfect belt cleaning, maximum paint recovery ensured by the patented system from Cefla and the CFB belt with sealed edges.
Cleaning system motor with inverter 1.50 kW.
Easy access system, components removable from the front, ergonomic layout.
Color and product change in seconds (including a spare set).
2 opposite arms with fixed holders for 4 guns, manual height adjustment.
Spraying equipment (pumps, guns) and adaptations are not included in the offer.
2 paint feed circuits with element recirculation and paint filters.
Stainless steel fittings.
이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.
The line will ensure good qualitative results under all operating conditions, provided that components with incorrect parameters are eliminated at the beginning, such as:
• Bent, warped components;
• Components with defects that would render them unsuitable for use even after painting.
• Maximum length 2500 mm
• Minimum length 350 mm
• Maximum width 1300 mm
• Minimum width 50 mm
• Maximum thickness 60 mm
• Minimum thickness 5 mm
• Maximum deflection 10 mm
• Average temperature 15-35 °C
• Minimum temperature -5 °C
• Relative humidity %
• Operating speed 2 [2-3] m/min
• Operating height 900 mm
MATERIAL
• Wood and wood-based materials
END PRODUCT
• Furniture
• Outdoor furniture
SHAPE
• Shaped components
TYPES OF PAINTS
• Solvent-based paints
• Water-based paints
Hjdpfjzq Axzsx Ah Iofp
FINISH
• Transparent
• Matte (< 25)
• Pigmented
• Semi-matte (30-40)
MITO B2: MITO B2 SPRAYING AUTOMAT
Spraying automat with 2 arms, dry air filtration system, and conveyor belt.
Machine designed for continuous coating of various types of profiled panels.
Spraying in continuous mode on any type of panel. No paint mist on the underside of the panels thanks to the 1650 mm conveyor belt.
Robust machine construction. Excellent access to the interior through glazed areas, access doors, and retractable parts.
Components are transported by a CFB belt transport system with a sealed edge, driven by a motor with a frequency inverter. The outer side of the belt is located outside the cabin to allow vapor containment. The axis is driven by a brushless motor and a toothed belt, ball bearings. Guarantees the best feed, acceleration and deceleration parameters, allowing for maximum coating quality.
New and patented PLENUM (patented air diffusion system).
Thanks to flow studies, better paint management (savings), better machine cleaning, and better coating quality are achieved.
Unique management of component transport with precise speed control prevents soiling of the lower part of the components during acceleration/deceleration.
Control electrical cabinet, located at the machine entrance on the service side, with electrical installation and connection channel to the machine.
Wide, robust and efficient double-zone with a filter section. Flow regulated by a frequency inverter.
Tanks with supports for Columbus filters
Fire-resistant ATEX cat. 2G exhaust fan
HCD type belt cleaning and paint recovery system.
Perfect belt cleaning, maximum paint recovery ensured by the patented system from Cefla and the CFB belt with sealed edges.
Cleaning system motor with inverter 1.50 kW.
Easy access system, components removable from the front, ergonomic layout.
Color and product change in seconds (including a spare set).
2 opposite arms with fixed holders for 4 guns, manual height adjustment.
Spraying equipment (pumps, guns) and adaptations are not included in the offer.
2 paint feed circuits with element recirculation and paint filters.
Stainless steel fittings.
이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.
이 광고들도 당신에게 관심이 있을 수 있습니다.
성공
귀하의 메시지가 전송되었습니다.
소형 광고
Bitburg
8,872 km
머시닝 센터 - 즉시 사용 가능 -
Biesse Ausstellung -Rover Multi Up M C S
Biesse Ausstellung -Rover Multi Up M C S
성공
귀하의 메시지가 전송되었습니다.
소형 광고
Barntrup
8,584 km
BIESSE Brema EKO 2.2 수직형 CNC 가공 센터 (2022)
BIESSEBrema EKO 2.2
BIESSEBrema EKO 2.2
성공
귀하의 메시지가 전송되었습니다.
소형 광고
폴란드
8,061 km
래커 건조
CEFLATR2V-FV3
CEFLATR2V-FV3
성공
귀하의 메시지가 전송되었습니다.
소형 광고
Rödermark
8,754 km
회전 및 틸팅 용접 테이블
DUMETAD-BYT-50 AC
DUMETAD-BYT-50 AC
성공
귀하의 메시지가 전송되었습니다.
소형 광고
Villesse
8,808 km
각도형 창문 가공 센터
SCM GROUPWINDOR 20
SCM GROUPWINDOR 20
성공
귀하의 메시지가 전송되었습니다.
소형 광고
Nattheim
8,776 km
4면 대패
SCMSintex XL
SCMSintex XL
성공
귀하의 메시지가 전송되었습니다.
소형 광고
Kežmarok
8,171 km
가열 공기 건조 터널
BÜRKLETRDUE Easy Dry JET 1400mm
BÜRKLETRDUE Easy Dry JET 1400mm
성공
귀하의 메시지가 전송되었습니다.
소형 광고
Kaunas
7,609 km
베니어 접합 기계
KuperFWS 1250
KuperFWS 1250
성공
귀하의 메시지가 전송되었습니다.
소형 광고
Waregem
8,949 km
도장 부스
SCMSuperfici Mini Plus P
SCMSuperfici Mini Plus P
성공
귀하의 메시지가 전송되었습니다.
소형 광고
Juszczyn
8,175 km
머시닝 센터
SCMACCORD WD
SCMACCORD WD
귀하의 광고가 성공적으로 삭제되었습니다
오류가 발생했습니다





















































































