유리 연마기INTERMAC
Master 45
유리 연마기
INTERMAC
Master 45
VB 부가세 별도
€30,000
제조 연도
2005
상태
중고
위치
Lubin 

사진은 보여줍니다
지도 표시
가격 및 위치
VB 부가세 별도
€30,000
- 위치:
- Lubin, 폴란드

전화하기
기술 세부 사항
- X축 이동 거리:
- 4,120 mm
- Y축 이동 거리:
- 2,310 mm
제안 세부 정보
- 광고 ID:
- A21304457
- 업데이트:
- 마지막 업데이트: 11.04.2026
설명
For sale: Intermac Master 45 glass/stone processing machine, the largest unit ever produced.
The machine was manufactured in 2005, with approximately 8,000 operating hours (including only about 100 hours dedicated to stone processing). The company is offering this machine for sale due to relocation and modernization of its machinery fleet.
Condition: The machine is in very good condition—protected against corrosion and has undergone a comprehensive overhaul. Most hoses and lines have been replaced, all leaks sealed, filters changed, coolant and lubricants replaced, axis brakes changed, door wheel bearings and control unit fuse replaced, as well as air hoses and both suction and return hoses for the vacuum pump. Technical water pump hoses, clean water hoses, and filters have also been replaced. The radiator has been professionally cleaned, the lubrication system has been cleaned, and the coolant and lubricant tanks refilled.
Operational status: The machine is fully functional and ready for immediate use. Professional geodetic measurements (laser scanning, photogrammetry) were conducted to verify machine geometry.
Technical specifications:
1. Working area: 4.12 × 2.31 meters
2. Software: ICam
3. Suction cup set: 160 mm round (2 pcs), 120 mm (2 pcs), 90 mm (2 pcs)
4. 3 reference starting points
5. Stone-processing tools included: 5 ISO40 tool holders, 45 mm cutting mill, 20 mm diameter bit, “0” surfacing mill, set of 5 polishing pads, 35 mm hole saw, 120° lettering engraver—all tools are very lightly used.
The machine is currently assembled and operational. It is a well-maintained, rust-free unit in full working order (interested buyers can request videos of the machine in operation). Throughout its lifespan, the machine has been stored in a dry, heated industrial facility.
Buyer is responsible for disassembly and transportation. Disassembly services can be arranged upon prior agreement if needed.
A VAT invoice will be issued. The listed price is NET.
Possible disassembly date: From 10/02/2026 onward.
Gbedpfoymgflox Abnok
Additionally, a Renner 15 kW compressor with a 500-liter pressure buffer tank can be purchased.
Preferred contact method: email.
이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.
The machine was manufactured in 2005, with approximately 8,000 operating hours (including only about 100 hours dedicated to stone processing). The company is offering this machine for sale due to relocation and modernization of its machinery fleet.
Condition: The machine is in very good condition—protected against corrosion and has undergone a comprehensive overhaul. Most hoses and lines have been replaced, all leaks sealed, filters changed, coolant and lubricants replaced, axis brakes changed, door wheel bearings and control unit fuse replaced, as well as air hoses and both suction and return hoses for the vacuum pump. Technical water pump hoses, clean water hoses, and filters have also been replaced. The radiator has been professionally cleaned, the lubrication system has been cleaned, and the coolant and lubricant tanks refilled.
Operational status: The machine is fully functional and ready for immediate use. Professional geodetic measurements (laser scanning, photogrammetry) were conducted to verify machine geometry.
Technical specifications:
1. Working area: 4.12 × 2.31 meters
2. Software: ICam
3. Suction cup set: 160 mm round (2 pcs), 120 mm (2 pcs), 90 mm (2 pcs)
4. 3 reference starting points
5. Stone-processing tools included: 5 ISO40 tool holders, 45 mm cutting mill, 20 mm diameter bit, “0” surfacing mill, set of 5 polishing pads, 35 mm hole saw, 120° lettering engraver—all tools are very lightly used.
The machine is currently assembled and operational. It is a well-maintained, rust-free unit in full working order (interested buyers can request videos of the machine in operation). Throughout its lifespan, the machine has been stored in a dry, heated industrial facility.
Buyer is responsible for disassembly and transportation. Disassembly services can be arranged upon prior agreement if needed.
A VAT invoice will be issued. The listed price is NET.
Possible disassembly date: From 10/02/2026 onward.
Gbedpfoymgflox Abnok
Additionally, a Renner 15 kW compressor with a 500-liter pressure buffer tank can be purchased.
Preferred contact method: email.
이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.
공급자
참고: 무료로 등록하거나 로그인하세요, 모든 정보를 확인할 수 있습니다.
등록일: 2023
1 온라인 광고
문의 보내기
전화기 & 팩스
+48 535 4... 광고
이 광고들도 당신에게 관심이 있을 수 있습니다.
소형 광고
Amstetten
8,563 km
단열 유리 생산 기계
LisecFPS-25/16 US
LisecFPS-25/16 US
소형 광고
Bad Waltersdorf
8,565 km
유리 절단 리프트 테이블
Hegla
Hegla
소형 광고
Zblewo
7,971 km
유리 그라인더
BavelloniGemy 8
BavelloniGemy 8
소형 광고
영국
9,055 km
CNC 펀치 프레스
AMADA PROMECAMGrindermak 150-06
AMADA PROMECAMGrindermak 150-06
소형 광고
Velžys
7,539 km
유리 틸팅 테이블
TRIULZI-IGTilting table
TRIULZI-IGTilting table
소형 광고
Władysławowo
7,904 km
디지털 인쇄기
DIP TECHGlassJet NOVO
DIP TECHGlassJet NOVO
소형 광고
독일
8,579 km
자동 엣지 샌딩 머신
BovoneELB 14-45
BovoneELB 14-45
소형 광고
Szczecin
8,205 km
유리용 수직 심기 시스템
LiSECKSR-25 R-L
LiSECKSR-25 R-L
소형 광고
독일
8,579 km
유리 커팅 테이블
Bottero100BBM
Bottero100BBM
소형 광고
Szczecin
8,205 km
유리용 디지털 프린터
Dip-TechGlassJet AR6000
Dip-TechGlassJet AR6000
귀하의 광고가 성공적으로 삭제되었습니다
오류가 발생했습니다





































































