와셔
Kitzinger Spiracon 100

제조 연도
2024
상태
신규 (완전히 작동합니다)
위치
Neuenkirchen 독일
와셔 Kitzinger Spiracon 100
와셔 Kitzinger Spiracon 100
와셔 Kitzinger Spiracon 100
more Images
Kitzinger Spiracon 100
Kitzinger Spiracon 100
Kitzinger Spiracon 100

기계 정보

기계 명칭:
와셔
제조업체:
Kitzinger
모델:
Spiracon 100
제조 연도:
2024
상태:
새로운
기능성:
완전히 작동합니다

가격 및 위치

위치:
Parkstraße 4, 17039 Neuenkirchen, Deutschland 독일
전화하기

기술 세부 사항

총 길이:
2,900 mm
총 폭:
620 mm
총 높이:
1,500 mm

제안 세부 정보

광고 ID:
A22044208
업데이트:
마지막 업데이트: 02.06.2026

설명

for approx. 100 E2 crates/hour
incl. crate turner (single-person operation)
System layout:
1. Zone – Main washing zone:
– with a centrifugal pump with 2.2 kW
(900 l/min at approx. 1 bar) distributed over a total of
50 stainless steel nozzles, which enable
thorough cleaning of all 4 sides.
A plate filter continuously cleans the washing solution
and filters it continuously.
– Tank volume 180 l
– Washing temperature in the main washing zone 50-55°C
The crate transport takes place via a spiral
(KITZINGER utility model), which ensures
precise crate separation and an unobstructed
impact of the washing solution for comprehensive
cleaning of all sides.
2. Zone – Rinsing area:
Dodpfx Asza Dvusixsuu
– The products cleaned in the machine are thoroughly
rinsed from all sides with fresh water.
The fresh water must be at least 45°C when fed to the
machine and is heated to approx. 80°C in the system.
Approximately 250-300 l are required per hour.
Technical data:
– Overall length of the base machine: 2000 mm
– with crate turner: 2500 mm
– with crate turner and discharge table: 2900 mm
– Machine width: 620 mm
– Machine height: 1500 mm
– Washing tunnel passage width: up to 430 mm (adjustable)
– Washing tunnel passage height: 330 mm
– Total heating power: boiler 1 x 10 kW
– Pump power: 2.2 kW, 900 l/min at 1 bar
– The housing is completely welded and consists
entirely of stainless steel. The substructure is largely made
of 3 mm sheet metal and is therefore very durable.
The machine has the following connections:
– Fresh water at least 45°C, 3/4″,
– Flow pressure at least 1, max. 6 bar via hose connection,
– Consumption approx. 300 l/h,
IMPORTANT: the machine requires warm fresh water,
connection 1/2″ or 3/4″
– Electricity 14 kW, 400 V, 50 Hz, 32A fuse
– Wastewater DN 40 to floor drain or channel
near the machine, below the machine tank with
standpipe
– with main switch
– powerful centrifugal pump
– system on stainless steel rollers
– sloping discharge side for returning water to the
bottom of the crates

이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.

공급자

등록일: 2026

1 온라인 광고

전화하기

문의 보내기

토지us 
독일
오스트리아
스위스
미국
영국
프랑스
벨기에
스페인
멕시코
이탈리아
네덜란드
폴란드
러시아 연방
벨라루스(벨라루스 공화국)
우크라이나
에스토니아
터키
뉴질랜드
아일랜드
체코 공화국
덴마크
핀란드
스웨덴
노르웨이
룩셈부르크
그리스
리투아니아
라트비아
아이슬란드
포르투갈
브라질
베네수엘라
아르헨티나
헝가리
슬로바키아
루마니아
몰도바
슬로베니아
세르비아
몬테네그로
알바니아
크로아티아
불가리아
북마케도니아
보스니아 헤르체고비나
이스라엘
이집트
모로코
인도
인도네시아
대한민국
일본
태국
말레이시아
베트남
중국, 중화인민공화국
대만
이란
방글라데시
참고: 귀하의 요청은 기계 카테고리의 모든 판매자에게 전달됩니다. 이를 통해 매우 많은 제안을 받을 수 있습니다.
요청을 보낼 수 없습니다. 나중에 다시 시도하십시오.

전화기 & 팩스

+49 395 4... 광고