트윈 벨트 연삭기 타입 ZBSKuhlmeyer
ZBS 3Ex
트윈 벨트 연삭기 타입 ZBS
Kuhlmeyer
ZBS 3Ex
EXW 고정 가격 부가세 별도
€139,000
제조 연도
2022
상태
전시용 기계
위치
Piaseczno 

사진은 보여줍니다
지도 표시
기계 정보
- 기계 명칭:
- 트윈 벨트 연삭기 타입 ZBS
- 제조업체:
- Kuhlmeyer
- 모델:
- ZBS 3Ex
- 기계 번호:
- 23 03 28 / 1
- 제조 연도:
- 2022
- 상태:
- 거의 새것 (전시 기계)
- 기능성:
- 완전히 작동합니다
가격 및 위치
EXW 고정 가격 부가세 별도
€139,000
- 위치:
- Mazurska, 18, 05-500 Piaseczno, Polska

전화하기
제안 세부 정보
- 광고 ID:
- A16565521
- 업데이트:
- 마지막 업데이트: 29.07.2025
설명
TWIN BELT GRINDING MACHINE TYPE ZBS
for manual grinding, satin finishing and polishing
Kdodpjt Hvkvjfx Agtew
- equipped with a left hand machine stand with the grinding belt drive unit and a right hand machine stand with the grinding belt clamping unit
- free space within the working area by guiding the belts over an upper installed deflection unit
- open and close of upper grinding belt hoods by pneumatic cylinder
- accident protection by movable grinding belt cover
- selectable for front and rear belt
- preselection by 2 potentiometers in the control panel and frequency inverter in high-line version
- with limit switch/operation by movable grinding belt cover
- tension of each grinding belt by pneumatic belt tension device
- the grinding belt is driven by a frequency controlled AC-motor with P = 4,0 kw
- frequency converter with brake chopper unit for braking in max. 10 s
- grinding belt speed v = 4 - 25 m/s
- emergency-off release line in the working area
- with a sliding table of aluminum-pipe installed between the machine stands
- table movement back and forward by means of 4 soft prism rolls
- max. workpiece weight 100 kg
- motorized table height adjustment by spindles and roller guiding's until max. 780 mm
- spindles drive by 2 synchronic gear motors with P = 0,75 kW, speed v = 0,5 - 1,5 m/min
- machine without lower traverse to increase the clearance of movement to an effective depth of 1400 mm (lower edge grinding belt - ground)
- with a temporary traverse, to remove after adjusting and bolting to the ground
- pressure of the grinding belt on the workpiece to be ground by manually operated grinding pressure piece, pendulous pressure piece with locking screw, softy guiding on prism rolls
- dust extraction tube on the left hand machine stand with D = 200 mm
- necessary extraction power = approx. 3400 m3/h
- working area to be illuminated by means of 2 LED lights, adjustable in 3 steps
ZBS 3 - table dimension 3000 x 1000 mm, grinding belt 100 x 9000 mm
Filter included.
Additional info in pdf attached.
이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.
for manual grinding, satin finishing and polishing
Kdodpjt Hvkvjfx Agtew
- equipped with a left hand machine stand with the grinding belt drive unit and a right hand machine stand with the grinding belt clamping unit
- free space within the working area by guiding the belts over an upper installed deflection unit
- open and close of upper grinding belt hoods by pneumatic cylinder
- accident protection by movable grinding belt cover
- selectable for front and rear belt
- preselection by 2 potentiometers in the control panel and frequency inverter in high-line version
- with limit switch/operation by movable grinding belt cover
- tension of each grinding belt by pneumatic belt tension device
- the grinding belt is driven by a frequency controlled AC-motor with P = 4,0 kw
- frequency converter with brake chopper unit for braking in max. 10 s
- grinding belt speed v = 4 - 25 m/s
- emergency-off release line in the working area
- with a sliding table of aluminum-pipe installed between the machine stands
- table movement back and forward by means of 4 soft prism rolls
- max. workpiece weight 100 kg
- motorized table height adjustment by spindles and roller guiding's until max. 780 mm
- spindles drive by 2 synchronic gear motors with P = 0,75 kW, speed v = 0,5 - 1,5 m/min
- machine without lower traverse to increase the clearance of movement to an effective depth of 1400 mm (lower edge grinding belt - ground)
- with a temporary traverse, to remove after adjusting and bolting to the ground
- pressure of the grinding belt on the workpiece to be ground by manually operated grinding pressure piece, pendulous pressure piece with locking screw, softy guiding on prism rolls
- dust extraction tube on the left hand machine stand with D = 200 mm
- necessary extraction power = approx. 3400 m3/h
- working area to be illuminated by means of 2 LED lights, adjustable in 3 steps
ZBS 3 - table dimension 3000 x 1000 mm, grinding belt 100 x 9000 mm
Filter included.
Additional info in pdf attached.
이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.
귀하의 광고가 성공적으로 삭제되었습니다
오류가 발생했습니다










