크롤러 굴착기Liebherr
R 900 C Litronic
제공
- 위치:
- Schleswig-Holstein, 독일
– 거리: 약 8,388 km
- 가용성:
- 경매 종료 직후 바로
- 인도 조건:
- FCA
무료
무료
설명
TECHNICAL DETAILS
Operating hours
Operating hours: approx. 7,800 h
Chassis dimensions
Transport width undercarriage: approx. 3,000 mm
Chassis center (Taurus): approx. 2,280 mm
Chassis length: approx. 4,600 mm
Boom and stick
Hydraulic boom: 3,600 mm
Handle length: 3,050 mm
EQUIPMENT
- Without shovel and without SMP
- 20% running plates available
- Windows defective - see photos
- Fully equipped hydraulic hoses available
- Taurus condition according to age
Further technical data according to manufacturer - without guarantee
Motor
Power according to ISO 9249:95 kW / 129 hp at 1,800 rpm
Engine type:Liebherr D 934 S according to Stage IIIA / Tier 3
Fuel tank capacity:290 l
Automatic idle:sensor-controlled
Hydraulic system
Hydraulic pump:Liebherr variable displacement pump in swash plate design
Flow rate:max. 300 l/min
Operating pressure:max. 350 bar
Pump control and regulation:Liebherr Synchron Comfort System LSC with electronic load limit control, pressure cut-off, minimum lift control, demand flow control, swing circuit priority and torque control
Hydraulic tank capacity:175 l
Hydraulic system capacity:max. 290 l
steering
Energy distribution:via control spools with integrated safety valves, simultaneous and independent operation of chassis, slewing gear and working equipment
Operation of equipment and slewing gear:with proportional crossgate levers
Chassis operation:with proportional foot pedal for travel drive
Additional functions:via switches or proportional foot pedals
slewing gear
Drive:Liebherr swashplate oil motor with integrated brake valve and torque control
Transmission:Liebherr compact planetary gearbox
Slewing ring:Liebherr, internally toothed, sealed single-row ball bearing slewing ring
Swivel speed:0 – 9.0 rpmcontinuously variable
Swivel torque:42 kNm
chassis
Drive:one Liebherr swashplate oil motor on each side of the chassis with brake valves acting on both sides
Transmission:Liebherr compact planetary gearbox
Driving speed level I:2.4 km/h
Driving speed level II:5.0 km/h
Tensile force:
이 광고는 자동으로 번역되었습니다. 번역 오류가 있을 수 있습니다.
결제 처리
- 구입 부대 비용:
- 9 %
- 지불 조건:
- 100% 선불 결제
- 결제 방식:
은행 송금
제안 세부 정보
- 광고 ID:
- A19049301
- 참조 번호:
- AUC-2504047
- 업데이트:
- 마지막 업데이트: 30.04.2025
- 독점 제공:
- 경매에서만 구매 가능
견학
Detmold LiebherrR900C Litronic
Bad Lippspringe Schliesing325MX-E
Ennepetal KOLBCubimat VC 2500 x 4500mm
Врњачка Бања Pak ProjektBoxmaker ASB-24
Oud-Alblas Arjesekomaxx 800
Babberich SoraluceFP 8000
Hennef LiebherrL 508 Radlader mit Schafel und Gabeln
Klagenfurt am Wörthersee MANTGA 32.360
Babberich BALEIGHRH-120
Wellingborough SahinlerHPK 200 DP
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-신뢰의 인증 마크
신뢰 마크란 무엇입니까?
Machineseeker는 선정된 딜러에게 Machineseeker 신뢰 인증마크를 부여합니다. 발급 전에 숙련된 Machineseeker 직원에 의해 표준화되고 철저한 검사가 수행됩니다.
우리는 무엇을 점검합니까?
영업 허가증 또는 상업 등기부 등본의 확인
판매자의
우편 주소 확인
은행 연결의 검증
대표 번호의
전화
접근 가능성 확인
경제 정보
에는 부정적인 특성이 포함되어서는 안 됩니다
구매자 불만
은(는) 인증 마크 박탈로 이어질 수 있습니다이것이 구매자로서 귀하에게 어떤 의미가 있습니까?
Machineseeker 신뢰 씰을 통해 구매자는 직접 검증하지 않고도 매우 높은 확률로 정직하고 성실하게 거래하는 신뢰할 수 있는 판매자를 식별할 수 있습니다.
물론 구매 과정에서 의견 차이가 발생할 수 있습니다. Machineseeker는 Machineseeker에서 활동 중인 구매자 또는 판매자에 의한 법률 위반에 대해 책임을 지지 않습니다.